• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2011

Laminar Flow over an equilateral triangular cylinder is studied for several inflow angles. Under an uniform flow of $Re_d$=50,75,100,125,150, the triangular cylinder is rotated by ${\theta}$=$0^{\circ}$,$15^{\circ}$,$30^{\circ}$,$45^{\circ}$,$60^{\circ}$,$75^{\circ}$,$90^{\circ}$,$105^{\circ}$. The governing equations are solved by the PISO algorithm based on the finite volume method of the unstructured grid system. The effects of the inflow angle on the vortex-shedding flows are investigated. The Strouhal number shows a minimum at ${\theta}$=$60^{\circ}$. It is closely related to the variation of pressure and flow structure induced by the movement of separation points.

• 공원문화
• /
• s.74
• /
• pp.83-94
• /
• 1998

'부리'와 '불(뿔)'과 음이 비슷해서 땅이름에서는 각의 한자로 들어가기도 했다. 백운대, 인수봉, 만경대의 세 부리가 있는 북한산이 삼각산이었던 것은 그 대표적인 예이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.39-46
• /
• 2002

This paper shows what is point to be considered at that time in cadastral settlement surveying after declination analysis between GPS and traditional surveying at coordinate result of cadastral triangulation points and supplementary point in site selected deplaning of streets which is surveyed traditional surveying. In the case that coordinates of cadastral triangulation assistance points was decided by standard of the existing cadastral triangulation points that direction of the error vector is in opposition, authors could know all errors was reduced inside coordinate by error being offset each other through the results of study. The coordinates result of cadastral triangulation point by standard of the cadastral triangulation points reduces the deviation value through error that an intersection points was centered being offset each other but through the result that a tendency of errors occurrence is analyzed goniometrys, supplementary points that is close to cadastral triangulation assistance points was affected by error of cadastral triangulation assistance points.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.442-451
• /
• 2015

Smartphone users are 15 billion in all round the world, and Korean smartphone users are estimated at 40million people to 83% of the Korean population. Selfie stick is most popular item among 20, 30's age users. And they use smartphones more than 90%. In survey they express inconvenience of using selfie stick. Inconveniences are as follows. * Heavy * Handle is inconvenient. * Mistiming during taking pictures * the range of shooting is not enough. In this paper the first improvement was that rod strength is slightly stronger. The second we divide a grip into 3 parts. If 3 parts are unfolded, these can use for tripod. We use deflection Interpretation for main Finite Elements Method program.

• CDE review
• /
• v.21 no.2
• /
• pp.27-30
• /
• 2015

Smartphone users are 15 billion in all round the world, and Korean smartphone users are estimated at 40million people to 83% of the Korean population. Selfie stick is most popular item among 20, 30's age users. And they use smartphones more than 90%. In survey they express inconvenience of using selfie stick. Inconveniences are as follows. * Heavy * Handle is inconvenient. * Mistiming during taking pictures * the range of shooting is not enough. In this paper the first improvement was that rod strength is slightly stronger. The second we divide a grip into 3 parts. If 3 parts are unfolded, these can use for tripod. We use deflection Interpretation for main Finite Elements Method program.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.408-416
• /
• 2010

A study on the calibration of an X-band HPS(Hongik Polarimetric Scatterometer) system for ground-based operation is presented in this paper. In order to calibrate the scatterometer system, the degree of its distortions are analyzed by comparison between theoretical- and measured-values using the theoretically well-known calibration targets such as a metal sphere, a trihedral corner reflector(CR) and a metal cylinder. The calibration works in the field conditions depend on the precise and stable measurements of those calibration target. we present a measurement technique, so-called, an automatic 2-D target-scanning technique, using the incidence-angle(${\xi}-$ and ${\phi}-$ directions) control of HPS system. Then, we used STCT(Single-Target Calibration Technique) and GCT(General Calibration Technique) to calibrate a distortion of the scatterometer system, and measured the polarimetric RCS(Radar Cross Section) and phase-difference of a trihedral-CR as a test-target to verify the accuracy of the calibration technique. Then, three different types(i.e., 10, 20, 30 cm) of trihedral-CR were used. we obtained the error ranges about ${\pm}1.0$dB, ${\pm}0.5$ dB in a polarimetric RCS and about $-20^{\circ}{\sim}0^{\circ}$ and ${\pm}5^{\circ}$ in the co-polarized phase-difference by using the GCT and STCT, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1799-1806
• /
• 1991

The effect of an elastic intermediate support on the vibration characteristics of a fluid conveying pipe system modeled as simply-simply supported and fixed-fixed supported pipes has been investigated. The approach is based on solving the closed form equation of the 4th order polynomials. The change of natural frequency and critical velocity are also investigated with the fluid density, the fluid velocity, the position and stiffness of the elastic intermediate support varied. The results show that the vibration characteristics of pipe system could be controled by changing the position and/or stiffness of the elastic intermediate support.

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.35-46
• /
• 1988

The prediction of clad surface temperatures is important to the design and the safety anlaysis of nuclear reactor. The accurate prediction requires the detailed knowledge of the flow structure and heat transfer, which is complicate due to anisotropic turbulent phenomena. A two-equation model including anisotropic eddy viscosity model is applied to forecast the velocity distribution. And the temperature field is calculated with uniform wall heat flux. The Galerkin's weighted residual finite element method has been used to calculate the turbulent quantities right up to the wall. The numerical results show good agreement with available data and that turbulence anisotropy strongly affects on the mean flow and thus the temperature field. And Nu-P/D correlation is established for sodium coolant in close-packed equilateral triangular bundle in the P/D range of 1.05 to 1.30.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.1-19
• /
• 2021

This study reports the Ar-Ar dating results for the volcanic rocks from small volcanoes(oreum) of the Hallasan Nature Reserve. According to the age of 40Ar/39Ar, the volcanic activity of the Hallasan Natural Reserve was started from about 192 ka ago. The basaltic trachyandesite and trachyte located in the Y valley near the Eorimok in the western part of the Hallasan Natural Reserve represent an age of about 191~192 ka, showing the oldest record of volcanic activity in the Hallasan Natural Reserve. In the Hallasan Natural Reserve, the small volcanoes older than 100 ka are Y Valley in Eorimok area (192±5 and 191±5 ka), Dongsu-Ak (184±19 ka), Mansedongsan (153±5 ka), Janggumok-Orum (135±6 ka), Eoseungsaengak (123±9 ka), Samgagbong (105±2 ka). And the small volcanoes younger than 100 ka are Witbangae-Oreum, Seongneol-Oreum, Muljangol, Yeongsil, Bori-Ak, Witsenueun-Oreum, Witsejokeun-Oreum, Heugbuleun-Oreum, Bangae-Oreum, Albangae-Oreum, Witsebuleun-Oreum, Baengnokdam, Nongo-Ak. According to the eruption of trachytes, the Hallasan Natural Reserve can be interpreted as having about 8 volcanic activities. Among them, 4 volcanic activities are related with the formation of trachyte dome, such as Wanggwanneung, Samgakbong, Yeongsil, and Baengnokdam, and 4 volcanic activities are related with flow or dyke of trachyte. The volcanic activity at the Hallasan Natural Reserve was started from northwest area, to in the southern area, and in the eastern area, and finally volcanic activity related to the formation of Baengnokdam.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.175-195
• /
• 2015

This study is aimed at exploring the educational meaning of cooperative hands-on activity in the technology subject from the perspective of a student who is an education consumer. For this purpose, this study selected 12 first year student of a middle school located at G City of Gyeonggi-do Province as research participants through purposeful sampling, and conducted an in-depth interview and group discussion based on stimulated recall questionary techniques. This study utilized area analysis, classification analysis and component analysis as a data analysis method, and secured the verity of the research through the examination between research participants and triangulation. As a result of this research work, it was found that the cooperative hands-on class in the technology subject had the meaning of 'Space between a burden and excitement about the technical making', 'Clue and ignition point of technological problem solving', and 'Self-discovery through Technical capability'. To be more concrete, 'Space between a burden and excitement about the technical making' means that students, whose usual school record is excellent, felt great psychological burdens of performance assessment, but their pre-experience and interest in 'Making' induced them to feel exhilaration of hands-on activity. 'Clue and ignition point of technological problem solving' means that students get to make much of the understanding & formation of the relationship with teammates in the process of resolving an unfamiliar hands-on activity task and to have the continuous problem-solving ability. 'Self-discovery through Technical capability' means that students get to realize the importance of learning experience of one's own making through hands-on activity learning, which could be the opportunity to meet the operant demands of the inner side. This study hopes that such results could be utilized as the basic data needed for designing the hands-on activity education in the technology subject more meaningfully and systematically for the time to come.