• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.281-282
• /
• 2009

The purpose of this experimental research is to investigate the influence of mineral admixtures on the resistance to acid and sulfate. For this purpose, concrete specimens with types of mineral admixtures such as ground granulated blast-furnace slag, fly ash, and silica fume were made for water-binder ratios of 32% and 43%. It was observed from the test result that the resistance against acid and sulfate of the concretes containing mineral admixtures were much better than the case of plain concrete from immersion tests of 182 days.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.30.1-30.1
• /
• 2009

정보화가 급속히 진전됨에 따라 보다 많은 양의 정보를 전송, 처리, 저장하게 되면서 이를 위해 대용량, 고속, 비휘발성의 특징을 갖는 차세대 메모리의 개발이 절실히 요구되고있다. 이 중 저항 변화 메모리(ReRAM)는 일반적으로 TiO2, Al2O3, NiO2, HfO2, ZrO2 등의 전이금속산화물을 이용한 MIM 구조로서 적당한 전기 신호를 가하면 저항이 높아서 전도되지 않는 상태(Offstate)에서 저항이 낮아져 전도가 가능한 상태(On state)로 바뀌는 메모리 특성을가진다. ReRAM은 비휘발성 메모리이며 종래의 비휘발성 기억소자인 Flash memory 보다 access time 이105 배 이상 빠르고, 5V 이하의 낮은 전압에서도 동작이 가능하다. 또한 구조가 간단하여 공정 단순화가 가능하고 소자의 집적화도 쉽다는 점 등 많은 장점들이 있어서 Flash memory를 대체할 수 있는 유력한 후보로 여겨지고 있다. 본연구에서는 DC-magnetron Sputtering 방법으로 전이금속 박막을 증착하고, Dry furnace로 산화시켜 전이금속산화물 박막을 제작한 후 저항변화 특성을 연구하였다. 두 개의 전이금속산화물 박막을 dual-layer로 형성시켜 저항변화특성을 관찰하였으며 또한, 전이금속산화물 박막의 조성을 달리 하여 저항변화를 관찰 하였다. 전이금속산화물 박막의 전기적 특성을 알아보기 위해 Si(100) wafer 위에 Pt를 이용 MIM 형태로 capacitor 시편을 제작 하여, probe station으로 I-V 측정을 하였고 조성 및 표면 분석을 위해서는 AES와 AFM을, 미세구조를 분석을 위해서는 TEM과 SEM 을 사용하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.637-643
• /
• 1995

TR75, a rice (Oryza sativa L. var. Sasanishikj) mutant resistant to 5-methyltryptophan (5MT) was segregated from the progenies of its initial mutant line, TR1. The 5MT resistance of TR75 was inherited in the M$_{8}$ generations as a single dominant nuclear gene, and was also expressed in callus derived from seeds, roots, and anthers as well as in the seedlings. The callus induced from these organs could grow at 50 mg/1 of 5MT, whereas the growth of wild-type callus was completely inhibited even at 25 mg/1. The seedlings of TR75 did not show resistance to L-azetidine-2-carboxylic acid, S-2-aminoethyl-L-cysteine, p-fluoro-DL-phenylalanine. The content of free amino acids in the TR75 homozygous seeds increased approximately 1.5 to 2.0 fold compared to wild-type seeds. Especially, the contents of tryptophan, phenylalanine and aspartic acid were 5.0, 5.3 and 2.7 times higher than those of wild-type seeds, respectively.y.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.325-326
• /
• 2009

The present study concerns the acid neutralization capacity (ANC) of cement paste, mortar and concrete depending on a free water-cement ratio. The ANC of paste at 30%, 40% and 50% of water-cement ratio was measured and simultaneously the effect of aggregate on the ANC was evaluated. It was found that an increase in the acid concentration resulted in a decrease in the pH of the suspension, in particular, at 10 in the pH, a sharp decrease was observed. The ANC showed some peak resistances to acid at particular pH values.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.801-809
• /
• 2007

Fly ash and blast furnace slag are an industrial by-product that can be alkali-activated to yield adhesive and cementitious materials, whose production is less energy-intensive and emits less $CO_2$ than ordinary Portland cement manufacture. A laboratory investigation was carried out to evaluate the effect of alkali-activating conditions on compressive strength of fly ash/slag cement and the acid corrosion resistance of this cement. Two alkali activator solution, NaOH and waterglass + NaOH solutions, were used. Waterglass concentration was the factor that gave the highest compressive strength in all tests. The next significant factor was the NaOH concentration, followed by curing temperature. Acid corrosion resistance of FC(fly ash cement) and FSC(fly ash/slag cement), such as sulfuric$(H_2SO_4)$ and hydrochloric acid(HCl), was for better than Portland cement(PC).

• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.290-297
• /
• 2009

This research aims to contribute the characterization of acetolactate synthase (Ec 4.1.3.18; ALS) and the resistance mechanism by sequence analysis of ALS gene of the sulfonylurea-resistant and -susceptible Monochoria vaginalis. The ALS gene was obtained from susceptible (S) and resistant (R) M. vaginalis to sulfonylurea herbicides (SUs). The 815 bp the fragment and the genomic DNA sequence coding for acetolactate synthase (ALS) of S and R biotypes of M. vaginalis were cloned and sequenced. Nineteen clones were divided greatly into 4 groups as result of sequencing. The first group was not difference to S type, the second group was amino acid of P197S which found point mutations causing substitution of serine for proline at amino acid 197, the third group was observed greatly other part of 6 places than group 1, and the fourth group appeared the intergrade of group 1 and 3. Therefore, it could be assumed what ALS gene of various types can be one plant. The peptide of the 13 amino acid Domain A region for ALS genes from R biotype of M. vaginalis differed from that of the S biotype by one base substitution at proline codon of Domain A. It could also be confirmed that point mutation of serine for proline at amino acid 197.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.396-396
• /
• 2008

투명 전도성 탄소나노튜브(carbon nanotube, CNT) 필름을 터치스크린이나 디스플레이 소자 등의 전극에 응용할 목적으로, CNT 필름의 전기저항 및 광 투과도를 향상시키기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 단일벽 CNT (single-walled CNT)를 여러 가지 계면활성제로 분산시킨 수용액으로부터 제조한 CNT 필름을 산 처리하여 저항 및 투과도의 변화를 관찰하였다. 우선 계면활성제로 분산시킨 CNT 수용액을 알루미나 재질의 필터에서 정량적으로 진공 필터링하여 CNT 필름을 제조하였다. 알루미나 필터를 sodium hydroxide (NaOH) 수용액으로 용해시켜 제거함으로써 얻은 CNT 필름을 유리기판 위에 부착시킨 후 광 투과도와 먼 저항 (sheet resistance)을 측정하였다. CNT 필름을 질산 ($HNO_3$) 용액에 처리하였을 때 투과도는 1~5 % 향상되었으며, 면 저항은 계면활성제로 분산시킨 CNT 필름 대부분에서 감소하였다. 이는 CNT 표면에 코팅되어 있던 계면활성제들이 산에 의해 제거되었기 때문일 것으로 추측된다. 특히 sodium dodecylbenzene sulfonate (NaDDBS)로 제조한 CNT 필름의 경우, 질산을 처리 전에는 투과도 83%, 면 저항 450 $\Omega$/sq.의 특성을 보였으나, 처리 후에는 각각 86 %, 350 $\Omega$/sq.로 향상되었다. Polyvinyl pyrrolidone (PVP)과 cetyltrimethylammonium bromide (CTAB)를 사용하여 제조한 CNT 필름의 면 저항이 가장 뚜렷한 감소를 보였다. 제조된 필름과 삼 처리된 필름 특성을 Raman spectroscopy, scanning electron microscopy, UV-Vis spectroscopy 등을 이용하여 분석하였고, 4-point probe로 면 저항을 측정하였다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 1996.06a
• /
• pp.155-160
• /
• 1996

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.319-328
• /
• 1995

This study was carried out to investigate the resistance mechanism by three different kinds of procymidone-resistant and susceptible isolates of Botrytis cinerea which had been collected from green houses. The average resistance level of the resistant strains was 1,000 times higher than that of susceptible ones. Also, it was revealed that the resistance was not originated from components excreted by Botrytis cinerea, based on the result obtained from the treatment with piperonyl butoxide and triphenyl phosphate as an inhibitor of monooxygenase and esterase, respectively. The total lipod content of resistant strains was 1.3 times higher than that of susceptible ones, among fatty acids, palmitic acid, stearic acid, and linoleic and being 3.0, 2.5, and 2.0 times higher, respectinely. Also slight differences in sterol contents and components were observed. The crude chitin content was slightly higher in susceptible strains but contents of N-acetyl glucosamine, a hydrolysate of chitin, were about 2 times higher in resistant ones.

• Journal of the Korea Concrete Institute
• /
• v.29 no.3
• /
• pp.283-290
• /
• 2017

Various types of fibers are utilized in cementitious materials in order to improve their performances. Here, the extent of fiber dispersion is of key importance regardless of the purpose of using fiber. In this study, activated carbon fiber dispersion in mortar samples was evaluated using electrical resistivity method. In particular, the extent of fiber dispersion was compared per mixing methods and surface treatments. The results suggest that the surface resistivity method is capable of evaluating dispersion of activated carbon fiber and that ultrasound dispersion method is superior to mortar mixer and hand mixer method. The use of superplasticizer improved dispersion but acid treatment was not effective.