• International Area Studies Review
• /
• v.12 no.3
• /
• pp.419-448
• /
• 2008

The objective of this study is to conduct a quantitative assessment of potential impacts on the Korean economy of Agreement on Trade in Services Under the Framework Agreement on Comprehensive Economic Cooperation Among the Governments of the Republic of Korea and the Member Countries of the Association of Southeast Asian Nations which was signed on 21 November 2007 using a Computable General Equilibrium (CGE) model. Tariff equivalents of services were calculated on the basis of concessions made in the Agreement between Korea and ASEAN member countries. The empirical analysis shows that Korea is to get an additional gain in real GDP of 0.04 percent and in welfare of US$106 million, with an increase in per capita utility of 0.03 percent. Total exports and imports of Korea are to rise by US$179 million and $191 million, respectively, causing a trade deficit of $12 million. Korea's exports to ASEAN member countries will increase by $108 million and Korea's imports from them will rise by $278 million, giving rise to a trade deficit of $170 million.

• Journal of Food Hygiene and Safety
• /
• v.33 no.6
• /
• pp.460-465
• /
• 2018

Deep sea water is deeper than 200 m in depth and maintains cool temperatures. It is clean seawater not contaminated by E. coli and other general bacteria. Because deep sea water is a recyclable resource with high industrial value, activities for commercial use are vigorously developing. We investigated safety, quality characteristics, and mineral contents of prototype products using deep sea water as a substitute for a curing agent and compared it with existing commercially processed products. This study examined the potential of deep sea water as an alternative to curing agent solution. As a result, safety and quality characteristics of processed meat products with deep sea water were not different from commercially processed meat products, but mineral contents were higher in processed meat products with deep sea water. Deep sea water could be widely used as purity salt and purity minerals that can replace chemical substances such as chemical salts. A new, active food market using deep sea water will emerge in the near future.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1088-1095
• /
• 2018

In this study, reduced graphene oxide/polyaniline composite was fabricated tomaximize their advantages with electrochemical performances and use as a electrodematerial for supercapcaitor. Polyaniline as an electrode material was synthesized bychemical polymerization of aniline monomer and reduced graphene oxide wasintroduced to prepare composite with polyaniline without any pre-treatment. Thereduced graphene oxide, polyaniline and their composite electrodes were fabricatedon gold coated PET(polyethylene terephthalate) substrate through spray coatingmethod which can also apply to industrial scale. we have also prepared reducedgraphene oxide and polyaniline single material electrode to compare theirelectrochemical properties with reduced graphene oxide/polyaniline composite electrode. We have analyzed and compared electrochemical properties of eachelectrodes by using cyclic voltammetry(CV), galvanostaticcharge-discharge(GCD) and electrochemical impedancespectroscopy(EIS) at same condition. As a result, reduced graphene oxide /polyaniline composite electrode showed higher capacitance value more thanpolyaniline and reduced graphene oxide electrode, respectively. Internal resistanceof reduce graphene oxide/polyaniline composite electrode was 24% and 58% lessthan polaniline and reduced graphene oxide electrode respectively. These resultsconsidered that reduced graphene oxide/polyaniline composite electrode has potential ability and enable to apply flexible energy storage and wearable devices.

• Journal of Korea Technology Innovation Society
• /
• v.22 no.3
• /
• pp.362-381
• /
• 2019

The purpose of this study is to examine how two factors among various affecting factors of technological innovation, i.e. sectoral system of innovation and R&D support service, were actually applied in the case of NUC Electronics. This company has achieved high level of innovation performance through change of injection port and improvement of extracting rate. This was possible because each component of sectoral system of innovation system was matched with the innovation activity. The improvement of the performance in NUC Electronics was attributable to its own innovation efforts and R&D support service of government research institute. In the process of technological innovation, the company could receive high-level services in areas such as product design and virtual experiments that companies can not solve themselves. It can be said that the role of government and public institutions to support the shortage of SMEs was important. In terms of each component of sectoral system of innovation, we found that there were many opportunities of new technology; sustainability was low; imitation was easy; appropriability was low but it has dualily; accumulation of technology was relatively high, availability of external knowledge was high. At the same time, both of the company and the network played an important role, and market conditions were very favorable. In terms of R&D support services, it is a direct effect that a great deal of time and cost savings have been achieved through virtual experiments on the material and shape of the screw. As an indirect effect, the core competence of the company has been greatly strengthened by utilizing the momentum of technology development through external support, hence the company could establish the structure of virtuous circle of innovation.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.1-11
• /
• 2021

In this study, a study related to laboratory and pilot test were performed to use an environmental soil stabilizer developed to induce a hardening reaction similar to that of Ordinary Portland Cement (OPC) by using industrial by-products of blast furnace slag and the combustion ash of a circulating fluidized bed boiler as the main material. For this, specimens were prepared using liquid A of sodium silicate and silica sol, and liquid B of an environmental soil stabilizer (or OPC), and laboratory tests were performed to analyze the strength and environmental characteristics. And pilot test was performed on the aging reservoir, field permeability test and electrical resistivity survey were performed in the field to analyze the applicability. As a result of the laboratory test, the homo-gel compressive strength of the chemical injection material using the environmental soil stabilizer as liquid B was about 2.88 to 3.23 times greater than that of OPC. In addition, the elution amount of most heavy metals was lower than that of OPC, and the survival rate in the fish, acute toxicity test was 100%. Therefore, when judged based on the results of the laboratory test, it was analyzed to be superior to OPC in terms of strength and environment. In the results of the pilot test in the aging reservoir, when the environmental soil stabilizer was reinforced with liquid B of the chemical injection material, the coefficient of permeability in the aging reservoir decreased to 1/50 level. In addition, as a result of the electrical resistivity survey, it was analyzed that the electrical resistivity inside the aging reservoir increased as time passed, the saturation zone disappeared, and the overall reinforcement.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.555-561
• /
• 2011

The objective of this study is the development of carbon recycle technology which converts $CO_2$ captured from flue gas to CO or carbon and reuse in industrial fields. Since $CO_2$ is very stable and difficult to decompose, metal oxide was used as an activation agent for the decomposition of $CO_2$ at low temperature. Metal oxides which convert $CO_2$ to CO or carbon at $500^{\circ}C$ were prepared using Zn-ferrite by the solid state reaction and hydrothermal synthesis. The behaviors of $CO_2$ decomposition were studied using temperature programmed reduction/oxidation (TPR/TPO) and thermogravimetric analyzer (TGA). Zn-ferrite containing 5 wt% ZnO showed the largest reduction and oxidation. Reduction by $H_2$ was 26.53 wt%, oxidation by $CO_2$ was 25.73 wt% and 96.98% of adsorbed $CO_2$ was decomposed to $CO_2$ and carbon with excellent oxidation-reduction behaviors.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.105-119
• /
• 2021

An increase in the frequency and intensity of both floods and droughts has been recently observed due to an increase in climate variability. Especially, land-use change associated with industrial structure and urbanization has led to an imbalance between water supply and demand, acting as a constraint in water resource management. Accurate rainfall-runoff analysis plays a critical role in evaluating water availability in the water budget analysis. This study aimed to explore various continuous rainfall-runoff models over the Soyanggang dam watershed. Moreover, the ensemble modeling framework combining multiple models was introduced to present scenarios on streamflow considering uncertainties. In the ensemble modeling framework, rainfall-runoff models with fewer parameters are generally preferred for effective regionalization. In this study, more than 40 continuous rainfall-runoff models were applied to the Soyanggang dam watershed, and nine rainfall-runoff models were primarily selected using different goodness-of-fit measures. This study confirmed that the ensemble model showed better performance than the individual model over different flow regimes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.398-407
• /
• 2021

Firefighters (who are responsible for people's safety) have one of the jobs that are expected to have problems due to aging in the workforce. An increase in the average age of firefighters can lead to serious social problems. The aim of this study is to survey firefighters in Jeollanam-do about their awareness of aging in firefighters, and to propose a plan to prepare them for aging through investigation and analysis of work problems that may occur due to an aging workforce. The survey shows that the higher the age group, the higher the awareness of aging firefighters, and the higher the total work experience and internal/external work experience, the higher the awareness of aging. As a plan to solve various problems that may arise from aging in firefighters, regular operation of physical fitness promotion programs, field work, job rotation, and managerial measures (such as a change of position to an administrative department) are prepared, and drone or robot technology is used. These solutions include the introduction of applied high-tech technologies to firefighting activities, establishment of retirement management policies, and preparation of plans to revitalize the connection to private employment. In order to maximize the applicability of the field, government institutional plans and preparations are essential.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.3-11
• /
• 2022

Owing to the increasing demand for electric vehicles (EVs), appropriate management of their waste batteries is required urgently for scrapped vehicles or for addressing battery aging. With respect to technological developments, data-driven diagnosis of waste EV batteries and management technologies have drawn increasing attention. Moreover, robot-based automatic dismantling technologies, which are seemingly interesting, require industrial verifications and linkages with future battery-related database systems. Among these, it is critical to develop and disseminate various advanced battery diagnosis and assessment techniques to improve the efficiency and safety/environment of the recirculation of waste batteries. Incorporation of lithium-related chemical substances in the public pollutant release and transfer register (PRTR) database as well as in-depth risk assessment of gas emissions in waste EV battery combustion and their relevant fire safety are some of the necessary steps. Further research and development thus are needed for optimizing the lifecycle management of waste batteries from various aspects related to data-based diagnosis/classification/disassembly processes as well as reuse/recycling and final disposal. The idea here is that the data should contribute to clean design and manufacturing to reduce the environmental burden and facilitate reuse/recycling in future production of EV batteries. Such optimization should also consider the future technological and market trends.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.200-207
• /
• 2020

The purpose of the establishment of Fab Lab is to promote the sustainable development of local communities around the world. To this end, The Fab foundation are preparing a resource-circulating society that maintains a city's self-sufficiency rate of 50% or more by 2054. In developed countries, Fab Lab is not only a manufacturing space for startup support, but an open innovation space for learning and creation. In addition, in emerging countries, Fab Lab is playing a role as a digital production center to create and share appropriate new technologies by reflecting the needs of local communities. India has 70 Fab Labs, the largest emerging country, ahead of Russia's 48. India's Fab Lab is conducting a collaboration project through regular meetings held every six months. The subject of this study, Fab Lab Vigyan Ashram, is defined as a place to transfer the concept of digital lab to alternative schools in rural India. In this study, we looked at a case in which an alternative school for an agricultural community called Vigyan Ashram, the modern version of the Gurukula system, successfully combined with the digital fabrication called Fab Lab to become a new citizen-led making community of the 4th Industrial Revolution. Based on this, we explored the development model of the Indian Fab Lab that fits the local situation.