• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.2
• /
• pp.103-116
• /
• 2006

This study suggests the effective approach that successfully establishes the supply chain management(SCM) system as a strategic weapon. To do so, the study conducted an empirical investigation which consisted of the five elements of power process, such as power element, needs, value, environment, relationship, strategic types of SCM, and the manufacturing performance. The results showed that the strategic type of SCM with active power process had higher manufacturing performance than other strategic types of SCM.

• Journal of Radiation Industry
• /
• v.2 no.3
• /
• pp.141-148
• /
• 2008

Beta rays emitted from tritium in titanium tritide film were simulated with cathode rays of a scanning electron microscope to investigate the effect of beta rays from tritium on semiconductor devices. The cathode ray currents, which vary with the change of applied energy and beam spot size, were measured with Faraday cup. The current from the semiconductor device irradiated with cathode rays at various conditions was measured. The cathode ray current increased with the increase of spot size to a maximum then decreased when the spot sized increased further. The magnitude of current produced in the semiconductor device is proportional to the magnitude of cathode ray current. The magnitude of cathode ray current at each energy level was matched to the intensity of beta ray to simulate the tritium beta ray spectrum. Then the semiconductor characteristics were analyzed with I-V curves.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.1
• /
• pp.105-110
• /
• 2021

Objectives: The purpose of this study was to develop a new sterilization plasma device that would be proficient at sterilizing and removing pathogenic bacteria and viruses, and applicable to air purification systems. Methods: In order to understand the performance characteristics, the discharge characteristics of a packed bed DBD reactor and the ozone reduction characteristics of an ozone filter installed at the outlet of the reactor were investigated. Results: The novel packed-bed DBD reactor was proposed, and it was confirmed that the plasma discharge was uniformly and stably discharged throughout the entire layer, and sufficient ozone was generated for sterilization. The ozone filter was tested for three methods: adsorption, adsorption-decomposition, and catalytic decomposition. When the filter thickness was 30 mm, the ozone concentrations were 0.03 ppm, 0.01 ppm, and 0.21 ppm, respectively. The adsorption and adsorption-decomposition methods satisfied the EPA standard of less than 0.05ppm, but the catalytic decomposition method did not. Conclusions: It was confirmed that the adsorption-decomposition method has relatively excellent ozone filter performance and can provide the best ozone filter.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.98-105
• /
• 2021

Using the frequency-based decomposition, I decompose the consumption growth to explain well-known patterns of stock returns in the Korean market. To be more specific, the consumption growth is decomposed by its half-life of shocks. The component over four years of half-life is called the business-cycle consumption component, and the components with half-lives under four years are short-run components. I compute the long-run and short-run components of stock excess returns as well and use component-by-component sensitivities to price stock portfolios. As a result, the business-cycle consumption risk with half-life of over four years is useful in explaining the cross-section of size-book-to-market portfolios and size-momentum portfolios in the Korean stock market. The short-run components have their own pricing abilities with mixed direction, so that the restricted one short-term factor model is rejected. The explanatory power with short- and long-run components is comparable to that of the Fama-French three-factor model. The components with one- to four-year half-lives are also helpful in explaining the returns. The results about the long-run components emphasize the importance of long-run component in consumption growth to explain the asset returns.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.151-160
• /
• 2024

Artificial Neural Networks that enabled Artificial Intelligence are being used in many fields. However, the application to mechanical structures has several problems and research is incomplete. One of the problems is that it is difficult to secure a large amount of data necessary for learning Artificial Neural Networks. In particular, it is important to detect and recognize external forces and forces for safety working and accident prevention of mechanical structures. This study examined the possibility by applying the Current Neural Network of Artificial Neural Networks to detect and recognize the load on the machine. Tens of thousands of data are required for general learning of Recurrent Neural Networks, and to secure large amounts of data, this paper derives load data from ANSYS structural analysis results and applies a stacked auto-encoder technique to secure the amount of data that can be learned. The usefulness of Stacked Auto-Encoder data was examined by comparing Stacked Auto-Encoder data and ANSYS data. In addition, in order to improve the accuracy of detection and recognition of load data with a Recurrent Neural Network, the optimal conditions are proposed by investigating the effects of related functions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1372-1376
• /
• 2006

기술개발자 혹은 기술공급자의 예측에만 의존하는 기술의 가치 추정은 과대평가 또는 과소평가될 우려가 있으며, 정확한 기술가치평가를 위해서는 공급측면에서의 분석과 함께 수요측면에서의 가치평가가 요구된다. 이러한 맥락에서 기술을 사용하게 될 잠재적 수요처를 파악할 필요가 있다. 또한 기술의 잠재적 수요처 파악을 통해 기술개발자들은 수요산업에 보다 적합한 제품을 개발하여 기술 가치를 극대화시킬 수 있다는 점에서 의의가 있다. 본 연구에서는 과학기술부가 시행하는 21C 프론티어 사업의 2단계 주요사업으로 선정된 수자원의 지속적 확보기술개발 사업에서 개발 중인 기술의 수요처 선정을 위한 준비 단계로써 공급지장비용 분석을 포함한 산업연관분석을 사용하여 수자원의 확보 또는 공급지장에 따른 산업부문별 파급효과를 산출하였다. 파급효과의 산업부문별 순위는 용수의 재분배 우선순위의 주요한 참고자료가 될 수 있으나, 공공재인 수자원의 특성과 산업의 특성에 따른 현실적인 제약조건들을 고려해볼 때 직접적으로 기술의 수요처라고 보기는 어렵다. 하지만 파급효과의 순위에 따라 기술의 수요가 발생했을 때 기술의 최대가치가 실현됨은 자명한 사실이며, 개별기술에 대한 사례연구 시에 수요산업의 대략적인 틀을 제시해 줄 수 있을 것이다. 또한, 기술개발자들이 수요처에 대한 인식을 보다 명확히 함으로써, 정부와 산업체를 통해 실용화될 수 있도록 기여할 수 있을 것으로 판단된다. 연구결과 산업연관분석을 통해 수도산업의 수요측면 공급측면 파급효과가 산출되었고, 수도의 공급지장으로 인한 파급효과의 순위는 농림수산품 음식료품 제1차금속제품 순으로 나타났다. 본 연구를 통해 개별기술의 달성가능한 최대가치가 산출되고, 개별기술의 사례연구 시에 설문대상 산업이 선정되어 수자원의 지속적 확보기술의 수요처 선정을 위한 토대가 마련될 것으로 기대한다. 수 있었다. 인공순환에 의한 저감효과가 크지는 않을 것으로 예측된다. 조사 기간중 H호의 현존 식물플랑크톤량의 $60%{\sim}87%$가 수심 10m 이내에 분포하였고, 녹조강과 남조강이 우점하는 하절기에는 5m 이내에 주로 분포하였다. 취수탑 지점의 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을 개발 및 활용할

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.74-80
• /
• 2011

In this study, it is evaluated on the properties of mechanical performance, autogenous shrinkage and chloride resistance for application of high performance concrete for bridge deck overlay used slag powder and fly ash as a representative by-product of industrialization. According to test results, it is evaluated that the durability of concrete is improved the properties of chloride resistance, autogenous shrinkage and alkali aggregate reaction by using hydraulic mineral admixtures. It is considered to have a green construction and an economic feasibility on recycling of by-product as a improved concrete for durability and efficiency in materials and constructions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.39-48
• /
• 2020

The present study investigates the chemical reaction and performance of ternary blended binders by mixing ferronickel slag. Cement was replaced using ground granulated blast furnace slag and ferronickel slag, combined up to 50% of the replacement rate. The blended cements were tested by setting times, length change, compressive strength at 1, 3, 7, 28 days. X-ray diffraction and scanning electron microscope were conducted for detecting hydration products while the MIP and microhydation heat were used for examining morphological characteristics. The results showed that by adding ferronickel slag, Pozzolanic reaction occurred, forming a dense pore structure and the effect of reducing hydration heat and dry shrinkage was also found. The compressive strength at 28 days was lower than that of 100% OPC control specimen (OSP0), but ternary blended cements showed no significant difference compared to binary blended (OSP50). If the optimal mix is derived later and used for the purpose, the potential for use as a cement binder is expected.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.89-98
• /
• 2010

Recently, many researches on bottom ash which is produced in the burning process of power plant are actively performed for its utilization for soil-subbase materials. In this paper, bottom ashes from 5 different power plants are prepared and several tests including compaction, CBR, and tri-axial compression are carried out for mixed bottom ash and weathered soil considering 3 replacement ratio of 30%, 50%, and 70%. Through the tests, CBR result over 20 are evaluated without plastic property, which shows availability of subbase material. With higher increase in replacement ratio of bottom ash, CBR of mixed soil increases due to the higher mechanical performance of bottom ash. However, replacement effects of bottom ash on friction angle and cohesion are evaluated to be little since bottom ash plays a little role in rearrangement of mixed soil. Bottom ash with a good mechanical property is evaluated to have reasonable bearing capacity which shows a good property for subbase materials.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.18-24
• /
• 2013

Recently, the interest is increasing about the eco-friendly concrete. Accordingly, the blast furnace slag(BFS), a by-product of industry is known for improving the durability through compaction in concrete and is expanding the use. The research about BFS in concrete be accomplished frequently. In this study, we should know the hydration characteristic of BFS concrete the through the adiabatic temperature rise test due to the replacement of a variety of BFS. In addition, we produced the regression analysis factors through the test result and analyzied the effect for the replacement of BFS. According to test results, the compressive strength showed a slight degradation or equal and the the adiabatic temperature rise figure and rising factors are went down for rising replacment of BFS. In the future, the study about the adiabatic temperature rise equation for the various replacement of BFS and binder is considered necessary.