• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.161-164
• /
• 2004

본 연구에서는 고휘도 백라이트에 있어서 일반적으로 휘도 향상을 위해서 사용하는 프리즘 혹은 편광프리즘 등의 고가의 기능성 광학시트를 사용하지 않고, 확산시트만을 사용하여 고성능의 BLU 를 제조할 수 있는 핵심부품으로서 프리즘 도광판에 대해서 연구하였다. 고휘도 프리즘 도광판을 구현하는 방법으로 먼저, 광학적으로 시뮬레이션을 통해서 가능성을 검증하고, 기본적인 광학구조의 설계를 수행한 후, 이를 stamper 방식의 사출성형으로 실물을 구현하여 설계의 재현성을 확인하는데 역정을 두었다. 실험결과, 17 inch, 두께 8 mm 사양의 모니터용 도광판에 있어서, 고휘도 BLU를 구현하기 위해서 도광판 밑면과 윗면에 프리즘 구조를 부가한 도광판의 경우에 기존의 인쇄형 도광판보다 약 20%의 휘도향상 효과를 확인할 수 있었으며, 향후 확산시트만을 사용한 고휘도 백라이트로의 응용가능성을 검증할 수 있었다.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.131-142
• /
• 2014

Phone camera lens module is assembled with a barrel, multiple lenses, multiple spacers and a shield. The major processes of manufacturing system are injection molding, coating and assembly processes, and each process has multiple machines. In this paper, we introduce a scheduler based on simulation model which can be used for frequent rescheduling problem caused by urgent orders, breaking down of molds and failures of machines. The scheduling algorithm uses heuristic Backward-Forward method, and the objective is to minimize the number of tardy orders.

• IE interfaces
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2008

The injection molding process is able to produce high precision manufactures as a single process with fast speed. However, the prices of both the mold and the molding machine are expensive, and the single process is very complex and difficult to compose of the exact relationship between the process setting conditions and the product quality. Therefore, the quality of a molded product often depends on a skillful engineer's operations in the design of both parts and molds. In this paper, the relationship between the process conditions and the defectiveness is built for better manufactures under settings of the appropriate parameters, and so it can reduce the setup time in the injection molding process. Quality Function Deployment (QFD) provides severe defectiveness factors along with the related process parameters. Also, neural networks estimate the relationship between defective factors and process setting parameters, and lead to reduce the defectiveness of molded parts.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1227-1237
• /
• 1988

A practically useful CAD system for mold design in the plastic injection molding processes has been developed. Even though many efforts have been tried to simulated the injection molding process, this is the first attempt toward an automatic mold design system instead of a manufacturing or a simulation system. In this system the computational routines, the data base for mold design, and the routines for three dimensional modeling are blended together so that the designed mold is obtained as a solid model. For this development, the following problems have been solved. First, the modeling capability of the plastic parts has been implemented by incorporating the modeling routines of a constructive solid geometric modeling system and developing a constant thickness modeling conditions, and that of standard mold bases have been established. Third, the experimental know-how and the empirical formulae have been collected and blended together with the modeling routines of a geometric modeling system to provide the high level commands for designing mold.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.735-737
• /
• 2016

In this paper, we conducted a test of the 3D printer injection method and LSU (Laser Scanning Unit) feature a fusion of the polygon mirror scanning system that is the core mechanism operation for 3D printers for office laser printers SLA system. These tests ensure that the laser was operating and control well was confirmed that a certain point is output to the X-axis by means of a laser module and a polygon mirror. And confirmed after the F-theta lens is incident on the fixed laser power of the beam, and correction according to the correction beam on the mirror reflection was confirmed jineunji the focus according to the Z-axis upper plate.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.7-12
• /
• 2021

Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al₂O₃ coating and DLC coating were compared to find the optimal surface treatment method. Al₂O₃ coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6655-6665
• /
• 2015

Due to tightened environmental regulations on halogen type flame retardants, the portions of those based on phosphorous compounds that are non-halogen type is rising. When producing functional film, the physical and thermal properties become distinctly different depending on the amount of Red-phosphorus(RP) addition which causes flame resistance. The physical properties of resin fall in big scale when too much flame retardants are added, and it is hard to be applied to functional films such as shrink or anticorrosive film. The purpose of this research is to study the effects on mechanical, physical, and other properties of RP-LDPE films by changing the RP-MB contents. The LDPE film used for this study was produced through blow-type injection molding. The flame resistance was VTM-0, and the tear resistance showed inverse trends of MD and TD. Contraction percentage showed no relationship with the amount of RP content, but the anti-corrosive property showed 0.05 % better result than the national anti-corrosion shrink film reliability standard.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.1-7
• /
• 2015

This study is a case study of the research study and education with high school students of natural sciences. Recent development of the Internet of Things (IoT) based on the subject of various studies exist. This study is one of the most portable communication devices of these infancy, yet students were easy to define the molding process of contacting a pager that can go along way in making research topics. We called a pager. Today, it is given a large and complex smart mobile communication devices that can be used for big data. Prior pagers are taught the meaning of the first mobile communication means in our lives were given device. The internal structure is relatively simple and is thought to function relatively simple, just suitable as a teaching practices of high school students with an interest in science and engineering universities. This study can see all of the mechanical, electronic information contents of the radio pager in a relatively simple analysis of the injection molding ONE CAVITY analysis. Furthermore, the students also rated good educational practices that give meaning to remind the convergence training on mass production and process automation.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.226-229
• /
• 2000

일반적으로 안경집은 일회적으로 사용하고 버리는 것이라 생각하는 사람이 많다. 안경집을 주로 생산하고 있는 대동사출금형과의 공동 노력으로 다기능성 안경집을 개발한 것을 소개한다. 일상적인 고정관념을 버리면 편리하고 기능성이 높은 제품을 만들 수 있다는 신념으로 개발한 결과 어린이나 젊은이들이 졸아할 문방구 겸용 안경집을 개발할 수 있었다. 완구는 소비자가 일상적으로 많이 접촉하기 때문에 곰팡이나 세균이 서식하지 않도록 항균 세라믹을 이용하여 항균처리하였다. 또한 상온에서 인체에 이로운 원적외선이 방출될 수 있도록 고안하였다. 단순한 색상의 무료함을 줄이기 위하여 어린이나 젊은이들이 좋아하는 상용화된 캐릭터를 사용하여 제품의 다양화를 꾀하였고, 4개의 조각으로 만들어 어린이들이나 젊은이들이 조립할 수 있도록 하여 흥미를 더할 수 있도록 하였다. 또한 소비자들이 선호하는 색을 알아보기 위하여 기존의 안경집을 활용하여 색상성호도 조사를 실시하였다. 젊은층은 자극적이고 화려한 색깔을 선호하는 한편 기성세대는 무난한 색깔을 선호하였다. 또한 콘택트 렌즈를 착용하는 경우에도 안경을 사용하는 경우가 많다. 이 경우 콘택트 렌즈와 안경을 따로 가지고 다녀야 하는 불편이 있다. 이에 착안하여 안경과 콘택트 렌즈를 겸용으로 사용하는 소비자를 위하여 안경과 콘택트 렌즈를 동시에 담을 수 있는 안경집을 개발(실용신안 출원번호:8928)하였다. 이 고안은 콘택트 렌즈를 안경집에 보관하기 위한 것으로 콘택트렌즈가 식염수에 잠겨 보관된 렌즈캡을 안경집내에 별도로 삽입되는 케이스에 수납하도록 구성하여 안경과 함께 콘택트 렌즈를 보관해 휴대하는 안경집 보관용 콘택트 렌즈 케이스에 관한 것으로 이것의 특징은 뚜껑이 열리고 닫히도록 구성된 안경집에 있어서 뚜껑 안쪽에 거울이 마련되고 뚜껑이 연결되는 선단부 안쪽에 끼움홈과 체결홈이 형성된 체결부를 갖는 안경집과 이것에 결합되는 체결구가 마련되어 개폐되는 커버가 형성된 케이스로 구성된다.로 금형설계 및 제작기간을 단축하고자 한다.ere demonstrated in rats after i.c.v., intraperitoneally and orally administration, respectively. The antiepileptical effects by the combination of compounds from ginseng; were compared with the iuluence of Rg1, Rb1, Rc and with the well known antiepileptical drugs such as carbamazepine, valproic acid. The base for the research is obtained by using the WAG/Rij strain (Luijtelaar, Coenen, Kuznetcova), an excellent genetic model for human generalized absence epilepsy. The improving action of gensinosides was effectively demonstrated on the model of electrical kindling of amygdala of WAG/Rij rats with genetically determined absences, and the influences of ginsenosides on the slow wave discharges have also been being investigated. The different characteristics of a kindling process exerted in the sex-different region of the amygdala and demonstrated that the level of sex steroids and content of neurosteroids in amygdaloid tissue ca

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.32-39
• /
• 2006

An acoustic emission technique was applied to the structural strength test for the structural integrity evaluation of the nozzle assembly. These AE results were compared with data from the strain gages and displacement transducer. NDT using X-ray technique was performed to improve the test reliability before and after each test. In this structural integrity evaluation of the nozzle assembly, the internal crack initiation in the structure could not be precisely revealed by the strain and displacement results but the location and load level of the initiated crack could be precisely evaluated by using AE technique. From this test, it was proven that some new cracks can be generated in composite liner of nozzle assembly under the unexpected load due to interference between obturator and nozzle and these can be a cause of the unexpected abnormal failure.