• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제40권3호
• /
• pp.207-215
• /
• 2022

This research has been focused on accessing precision and accuracy of UAV (Unmanned Aerial Vehicle)-derived 3-D surveying coordinates. To this end, a highly precise and accurate testing control network had been established by GNSS (Global Navigation Satellite Systems) campaign and its network adjustment. The coordinates of the ground control points and the check points were estimated within 1cm accuracy for 95% of the confidence level. FC330 camera mounted on DJI Phantom 4 repeatedly took aerial photos of an experimental area seven times, and then processed them by two widely used software packages. To evaluate the precision and accuracy of the aerial surveys, 3-D coordinates of the ten check points which automatically extracted by software were compared with GNSS solutions. For the 95% confidence level, the standard deviation of two software's result is within 1cm, 2cm, and 4cm for the north-south, east-west, and height direction, and RMSE (Root Mean Square Error) is within 9cm and 8cm for the horizontal, vertical component, respectively. The interest is that the standard deviation is much smaller than RMSE. The F-ratio test was performed to confirm the statistical difference between the two software processing results. For the standard deviation and RMSE of most positional components, exception of RMSE of the height, the null hypothesis of the one-tailed tests was rejected. It indicates that the result of UAV photogrammetry can be different statistically based on the processing software.

• Journal of Korean Society for Geospatial Information Science
• /
• 제25권2호
• /
• pp.57-65
• /
• 2017

The purpose of this study is to analyze the feasibility of using Global Navigation Satellite System(GNSS)/Geoid technology in determining orthometric height in mountain. For the study, a test bed was set up in and around Mount Jiri and GNSS surveying were conducted. The orthometric height of 39 benchmarks was determined by applying the EGM2008, KNGeoid13, and KNGeoid14 geoid models and the accuracy was estimated by comparing with the offical Benchmarks orthometric height value issued by National Geographic Information Institute(NGII) and finally, the results were analyzed with the Aerial Photogrammetry Work Regulations. As a result of the study, it was found that the accuracy of the orthometric height determination by GNSS/Geoid technology was ${\pm}7.1cm$ when the KNGeoid14 geoid model was applied. And also, it can be confirmed that it is usable for the less than 1/1000 plotting scales as a vertical reference point for the aerial triangulation in Aerial Photogrammetry.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제22권4호
• /
• pp.339-347
• /
• 2004

This study aims at calculating the exact soil conversion factor of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative accuracy of the difference was calculated at 0.5% in average. We have calculated the exact soil conversion factor by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with soil conversion factor determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of soil conversion factor, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 한국조경학회 2022년도 추계학술대회 논문집
• /
• pp.120-121
• /
• 2022

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제14권2호
• /
• pp.219-228
• /
• 1996

The list of the titles of surveying-related papers and books is updated by adding newly polished paper/book titles to the existing one. A special title-search program is developed for managing and searching the surveying-re-lated paper/book titles, and the database is established from the list of the papers. The total number of papers/books in surveying-related field published in Korea upto now is 971. The number of papers/books published in the specific fields are 206 in the conventional surveying field, 218 in Photogrammetry, 183 in Remote Sensing, 127 in Geodesy and GPS, and 237 in Digital Mapping and GIS. The special title-search program is developed using the Visual Basic 3.0 for Windows 3.1 to be operated in the Window environment. The SQL(Structured Query Language) is used for the searching commands.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제20권1호
• /
• pp.47-57
• /
• 2002

The intention of this study is to construct the spatial database and to extract attribute data which are able to complete the omitted data in the topographical map or completion map of construction using the image data of various form such as artificial satellite images, aerial photographs, terrestrial photographs and so on. This study used the single frame images only for the raw image data, supposing the case of rigorous photogrammetric method is not available or rapid acquisition of information is need. The extracted spatial and attribute data from the images are used for modifying and updating the database, and for providing visual effect useful for guide and management of the facilities. This study intended to develop the technique able to apply in the case where comparative high accuracy is not required or rapid modification is necessary, and to verify the possibility of editing and updating the digital map using the photographs or video images remained as old data. Many of previous research on the management system for university facility has been accomplished focusing on the design and construction of database itself. Otherwise, this study aimed for the construction of guide and management system based on compiling the digital map of present state using multi-imagery, and the more applicability was intended too.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제21권1호
• /
• pp.1-7
• /
• 2003

Practical use is increasing on the aerial ortho image recently, and much researches for geographic information system build that use high resolution satellite image cause this are progressing. Also many researches that use KOMPSAT-1 satellite image of resolution 6.6m are performing in these days, estimation for between aerial photo and satellite image is needed. In this treatise scanned image of aerial photo, using aerial photo resampling image of resolution equal with KOMPSAT-1 image using aerial photo, and KOMPSAT-1 satellite image use for experimental image making each orthoimage, classified feature for estimate. We evaluated to what level that an separation item could be able to estimate in each orthoimage. As result of estimation analysis, In the classified feature in aerial photo orthoimage with aerial photo resampling image orthoimage is about 61%, KOMPSAT-1 satellite image orthoimage is almost 41% could estimated. Through this investigation estimate, KOMPSAT-1 satellite sue to map updating, geographic information og non-approach area and environment inspect.

• Journal of the Korean Association of Geographic Information Studies
• /
• 제23권1호
• /
• pp.41-50
• /
• 2020

The National Geographic Information Institute of Korea takes digital aerial photograph images every two years to make and modify/renew the digital map. The cameras for aerial photogrammetry to capture these digital aerial photographs are divided into frame types and line types. Computer vision analysis of aerial photograph images was only possible for frame type. Thus, in this study, Line type aerial photograph images was intended to generate geospatial information through computer vision analysis, and forest geospatial information was created as a method for the utilization of aerial picture images. As a result, geospatial information generated by computer vision analysis of line type aerial photograph images showed that RMSE of horizontal and vertical position errors was less than quadruple that of GSD. Forest geospatial information was generated using geospatial information generated by computer vision analysis. It was confirmed that extraction of the crown of tree and calculation of tree height are possible. Through this study, it is expected that utilization of aerial photograph images will be improved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제17권3호
• /
• pp.233-243
• /
• 1999

In this study, sample sites are chosen where digitalized cadastral maps are available, and boundaries of forestry, farming lands, and residence are clearly distinguishable. Digital orthophotos, produced from aerial photographs, are overlaid with digitalized cadastral maps to grope for applications of digital orthophoto in cadastre. The conclusions and applicable fields of this study are as follows. The first. digital orthophoto is applicable to solve problems such as discordance and duplication of boundary produced in the process of digitizing cadastral maps. The second, using digital orthophoto, it is possible to extract regions where a trouble of ownership would exist and so the necessity of cadastral resurveying can be brought. The third, by overlaying digital orthophoto and cadastral map, it can be used effectively for the present situation maintenance of buildings. The fourth, because it is possible to examine current land use of each lot, digital orthophoto may contribute to decide the validity of land category on cadastral map.

• Journal of Korean Society for Geospatial Information Science
• /
• 제7권2호
• /
• pp.81-91
• /
• 1999

The study on the updating of the database of Geo-Spatial Information System that is necessary condition to GSIS operation have executed actively. In this study, digital orthophotos were produced by using the product of digital photogrammetry process and then multiscale digital orthophoto maps were generated tv the concept of image pyramids. The produced digital orthophoto has 2.092 meters accuracy compared to 1:5,000 topographic map. This digital orthophoto can be implemented in various Geo-Spatial Information System, providing valuable spatial reference for other objects in the database.