• Fire Science and Engineering
• /
• v.32 no.4
• /
• pp.86-94
• /
• 2018

A sports center fire in Jecheon caused 29 deaths and 40 injuries. This study focused only on the structural factors of the building and equipment to investigate the causes of casualties based on the fire investigation results at the sports center. The structural factors of the building and equipment were a piloti-type parking lot, lack of a fire compartment between the piloti-type parking lot and lobby, lack of an installed sprinkler system, lack of an installed fire door in the main stairs on the $1^{st}$ floor, lack of an installed fire water tank on the rooftop, an installed pocket fire door in the main entrance on the $2^{nd}$ floor, poor fire compartments in an EPS space and a pipe pit and on each floor, a leak in the joint of a drain pipe, plywood installed in the hoistway of the freight elevator and interior wall, illegal remodeling of a closed rooftop structure, which cannot discharge smoke and heat, installed styrofoam insulation in the inside of the parking lot ceiling, an installed tempered glass window, which cannot be opened in the ladies bathroom on the $2^{nd}$ floor, and a finished dryvit exterior wall.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.7-11
• /
• 2005

A single slab in which one Ni(001) atom layer embedded between two of four Rh layers is considered to examine the oscillation of magnetic moment in each layer. The all electron total-energy full-potential linearized augmented plane wave(FLAPW) method was used to calculate the spin densities, magnetic moments, density of states(DOS), and the number of electrons within each muffin-tin(MT) sphere. The magnetic moment of the center layer Ni(C) in the system of 4Rh/Ni/4Rh is calculated to be 0.34${\mu}_B$, which is 40% have magnetic moment at the interface layers by strong band hybridization with Ni(C) when Ni(001) monolayers is inserted, and the magnetic moment shows a damped oscillation as we go from center Ni(C) layer to the surface Rh(S). From the calculated density of states, it is found that the Fermi level shifts inside the energy band of the Ni(C) in affection of Rh(001).

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.311-332
• /
• 2014

Recently, there have been an increasing concern for a continuous growth inside the company due to its being complacent about their present business and not taking challenges for innovation. Corporate entrepreneurship is the one that receives an attention as a breakthrough for this growth. Since it has been perceived as an effective means of promoting an innovation, Korean firms have tried to develop innovative products and businesses, reject hierarchical and rigid organizational culture, and settle more flexible and innovative culture through corporate venturing system. In this research, case studies on three Korean firms'corporate venturing system were conducted. It also investigated differences in operation and vitalization of corporate venturing system depending on the type of how it is implemented in the company by analyzing case studies with combining the type of corporate entrepreneursip's realization and the framework for its vitalization.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.209-215
• /
• 2020

In order to understand the characteristics of natural droughts, it is very important to interpret the spatio-temporal relationship between different types of droughts. In this study, meteorological and hydrological drought events were defined to account for the overlap between drought duration and spatial extent in three dimensions (i.e., latitude, longitude, and timing). In other words, the spatio-temporal drought propagation characteristics were analyzed based on the drought characteristic factors (duration, area, depth, center). The drought map considering the characteristics of spatio-temporal drought propagation can be used to find the fundamental cause of the hydrological drought which is expected to frequently occur in the future. In addition, the drought map is expected to be useful in preparing an effective drought response plan.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.325-325
• /
• 2012

1차원구속 반도체인 nanowires (NWs)는 전기적, 광학적으로 일반 bulk구조와 다른 특성을 가지고 있어서 현재 많은 연구가 되고 있다. 일반적으로 NWs는 Au 등의 금속 촉매를 이용하여 성장을 하게 되는데 이때 촉매가 오염물로 작용을 해서 결함을 만들어서 bandgap내에 defect level을 형성하게 된다. 본 연구는 Si (111) 기판 위에 GaAs NWs 와 InAs NWs를 촉매를 이용하지 않고 성장 하였다. vapour-liquid-solid (VLS)방법으로 성장하는 GaAs NWs는 Ga의 droplet을 이용하게 되는데 Ga이 Si 기판위에 자연 산화막에 존재하는 핀홀(pinhole)로 이동하여 1차적으로 Ga droplet 형성하고 이후 공급되는 Ga과 As은 SiO2 보다 GaAs와 sticking coefficient 가 좋기 때문에 Ga drolept을 중심으로 빠른 선택적 성장을 하게 되면서 NWs로 성장을 하게 된다. 반면에 InAs NWs를 성장 할 시에 droplet 방법으로 성장을 하게 되면 NWs가 아닌 박막 형태로 성장을 하게 되는데 이것으로 InAs과 GaAs의 $SiO_2$와의 sticking coefficient 의 차이를 추측을 할 수 있다. InAs NWs는 GaAs NWs는 달리 native oxide를 이용하지 않고 InAs 과 Si 사이의 11.5%의 큰 lattice mismatch를 이용한다. 이종의 epitaxy 방법에는 크게 3종류 (Frank-van der Merwe mode, Stranski-Krastanov mode, Volmer-Weber mode)가 있는데 각기 다른 adatom 과 surface의 adhesive force로 나누어지게 된다. 이 중 Volmer-Weber mode epitaxy는 adatom 의 cohesive force가 surface와의 adhesive force보다 큰 경우 성장 되는 방식으로 InAs NWs 는 이 방식을 이용한다. 즉 droplet을 이용하지 않는 vapour-solid (VS) 방법으로 성장을 하였다. 이 때 In 의 migration을 억제하기 위해서 VLS mode 의 GaAs NWs 보다 As의 공급을 10배 이상 하였다. FE-SEM 분석 결과 GaAs NWs는 Ga droplet을 확인 할 수 있었고 InAs NWs는 droplet이 존재하지 않았다. GaAs와 InAs NW는 density와 length가 V/III가 높을수록 증가 하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.164-164
• /
• 2011

본 연구에서는 InAs 양자점 태양전지의 활성영역에 크기가 다른 양자점을 삽입하여 그 광학적 특성변화를 photoreflectance (PR)와 photoluminescence (PL)를 이용하여 연구하였다. 본 연구에 사용된 InAs 양자점 태양전지 구조는 n+-GaAs (100) 기판 위에 n+-GaAs buffer를 300 nm 성장 후 활성영역에 InAs 양자점과 40 nm 의 n-GaAs spacer를 이용하여 8층의 양자점을 삽입하였다. 그 위에 n-GaAs $1.14{\mu}m$와 p+-GaAs $0.6{\mu}m$, p+-AlGaAs window를 50 nm 성장하고 ohmic contact을 위하여 p+-GaAs 10 nm 성장하였다. 활성영역에 사용된 InAs 양자점의 크기는 InAs 조사량을 1.7 ML~3.0 ML까지 변화시키며 조절하였다. 양자점 태양전지의 활성영역에 삽입한 양자점의 크기에 따른 photoreflectance 측정에서 InAs 조사량이 0~2 ML 사이에서는 Franz-Keldysh oscillation (FKO)의 주기가 짧아지고 2.5 ML 이상에서는 일정한 값 가짐을 보였다. 이는 양자점의 크기가 커질수록 내부 응력에 의한 전기장의 변화에 의한 것으로 사료된다. 아울러 InAs 양자점 태양전지의 photoluminescence 측정 결과 상온에서 1.35 eV 근처에 발광이 관측되었으며 InAs 조사량이 증가할수록 발광중심 낮은 에너지쪽으로 이동함을 보였으며 태양전지 효율은 2.0 ML 인 경우 최고치를 나타내었다. InAs 조사량을 2.0 ML 이상 증가 시킨 경우는 효율이 점진적으로 감소하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.45-45
• /
• 2011

알루미늄과 그 합금은 내부식성(corrosion resistance)이 좋고, 밀도가 낮아 높은 연료소비 효율을 필요로 하는 항공기와 자동차 같은 운송수단의 내-외장 소재로 사용되고 있다. 또한 알루미늄의 높은 내부식성을 이용하여 철강소재의 부식을 방지하는 보호막으로도 폭 넓게 사용된다. 물리기상증착(physical vapor deposition)으로 알루미늄을 코팅하면 박막 성장 초기단계에서 핵(nucleus)을 형성하고, 형성된 핵을 중심으로 주상 구조(columnar structure)로 박막이 성장하는 것이 일반적으로 알려진 방식이다. 주상 구조의 알루미늄 박막은 주상정과 주상정 사이에 필연적으로 공극(pore)이 존재하게 되어 부식을 일으키는 물질이 박막으로 침투하게 되고, 부식 물질과 모재가 반응하여 공식(pitting corrosion)이 발생한다. 본 연구에서는 스퍼터링(magnetron sputtering)을 이용하여 치밀한 조직을 갖는 알루미늄 박막을 코팅할 수 있는 공정을 개발하고, 치밀한 알루미늄 조직이 내부식성에 어떠한 영향을 미치는지 평가하였다. 기판은 냉연강판(cold rolled steel sheet)이 사용되었으며, 알루미늄 타겟의 순도는 99.999%, 크기는 직경 4"이었다. 냉연강판은 진공용기(vacuum chamber)에 장착하기 전에 계면활성제를 이용하여 표면에 존재하는 기름성분을 제거하였으며, 진공용기에 장착한 후에는 아르곤 가스를 이용하여 발생시킨 글로우 방전으로 표면에 존재하는 산화물을 제거하였다. 알루미늄 박막의 조직에 영향을 미치는 공정변수를 확인하기 위해서 스퍼터링 파워, 공정 온도, 공정 압력, 외부 자기장 세기 등의 공정 조건을 변화시켜 코팅을 실시하였다. 실험을 통해서 얻어진 최적 조건으로 알루미늄을 코팅할 경우, 알루미늄 bulk의 밀도와 비교하여 약 94.7%의 밀도를 갖는 알루미늄 박막을 코팅할 수 있었다. 알루미늄 박막이 약 3 ${\mu}$m의 두께로 코팅된 냉연강판의 내부식성 평가(salt spray test, 5% NaCl) 결과, 평가를 시작한 후 72시간 후에도 적청이 발생하지 않았다.

• Journal of the Korean association of regional geographers
• /
• v.11 no.3
• /
• pp.323-335
• /
• 2005

The aim of this study is m inquire the features of preservation and utilization of traditional buildings landscape through the effort of civics and public institution. Kawagoe is 30km from Tokyo and keeps the history and culture of Edo period. The tourism feature of the Ichibangai area which has the traditional warehouse(Kurazukuri) landscape is that the rate of old tourists from nearby regions is high and the one day trip is majority. The most tourists have visited many times, but they have spent small sum of money. The tourism activation of Ichibangai area is the result of the cooperation and effort of public institution, civic organization, and civics. The public institutions have the institutional support system has established which is including the designation of cultural assets, ordinance enactment, tax exemption, repairing charges support, public hearing, construction of tour network. The residents of the Ichibangai area have contributed to preserving the traditional landscape and activating tourism through their own organizations and meetings for a long time. And the roles of various committees which have leaded close cooperation relations between civics and public institution are activated.

• Journal of the Korean association of regional geographers
• /
• v.19 no.3
• /
• pp.494-513
• /
• 2013

In this study, a transnational social space which emerges in a rural village of the northern Vietnam called 'Korean Village' is analyzed. The immigrant women of whom the spouses are Korean were forming transnational network with family members through which frequent and active communications took place. At the same time materialistic exchanges were occurring by means of remittance. Like most rural areas where up-to-date life patterns co-exist with outdated ones, the studied region was turning into a transnational social space under the influence of indigenous locallity, culture and other economic factors. Women were found to play a virtual role as resonator in practicing the transnational activity of migration. With the migration routes getting more and more solidified, the evolution of the transnational social space and the role of resonator, the form of transnational migration which makes involved young women look like a sacrifice is ceaselessly expanding around a specific region. This is noticeable because a rural village seemingly far away from internationalization is not only becoming the transnational social space but also a stage of its evolution.

• Journal of Engineering Education Research
• /
• v.13 no.6
• /
• pp.49-56
• /
• 2010

In this study, we investigated the perception difference of industrial managers and engineering faculties in the engineering education, and searched for a rational solution to resolve this perception differences. Both engineering faculties and industrial managers place strong emphasis on practical training, but they showed a significant difference in addressing the issues on the graduates of engineering education have. This different perceptions are occurred since the industrial managers prefer "the instant(or ready-made) human resource type", the ones to put to work right away whereas professors prefer the ones with the strong basic knowledge, "the potential human resource type", who may in the long run contribute to the development of the industry. We believe Finland Helsinki Engineering School's co-op course and Pennsylvania State University's Capstone Design Education are the good examples of nurturing "practical" human resource although both programs are conducted in very different imaginative ways.