• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.1
• /
• pp.38-45
• /
• 2017

Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.745-752
• /
• 2016

In the era of the Internet of Things, where all physical objects are connected to the Internet, we suggest a remote control system using a Raspberry Pi single-board computer with ZigBee, which can turn an indoor light-emitting diode (LED) and a multiple-tap on and off, and with a smart phone can control the brightness of the LED as well as an electronic door lock. By connecting an infrared (IR) transmitter module to the Raspberry Pi, we can control home appliances, such as an air conditioner, and we can also monitor indoor images, indoor temperatures, and illumination by using a smart phone app. We developed a method of finding out IR transmission codes required for remote-controllable appliances with an AVR micro-controller. We suggest a method to remotely open and shut an office door by novating the door lock. The brightness level of an LED (between 0 and 10) can be controlled through a PWM signal generated by an ATmega88 microcontroller. A mutiple-tap is controlled using an ATmega32, a photo-coupler, and a TRIAC. The signals for measured temperature and illumination are converted from analog to digital by using the ATtiny44A microcontroller transmitting to a Raspberry Pi through SPI communication. Then, we connect a camera to the CSI head of the Raspberry Pi. We can turn on the smart multiple-tap for a certain period of time, or we can schedule the multi-tap to turn on at a specific time. To reduce standby power, people usually pull out a power code from multiple-taps or turn off a switch. Our method helps people do the same thing with a smart phone, if they are away from home.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.208-216
• /
• 2019

Rural houses are losing their original shape as they mimic the spatial composition of urban houses. Therefore, the purpose of this study was to extract the design elements needed for rural housing by applying Christopher Alexander's "A PATTERN LANGUAGE" to Standard Rural-House Design (SRHD). The scope and method of research was to compare and analyze the standard designs (SD) produced and distributed by the 'Korea Rural Community Corporation' from 2009 to 2014. The research result is summarized as follows. 1) The housing layout in the SD ignored the site conditions of various rural areas. 2) Most of the houses were not actively planned, considering that they contain various activities of rural life. 3) There was no room for children and the kitchen was planned to integrate the interior into a flexible space in the form of L.D.K. 4) There was no space plan that could be used as both a leasable annex and office space for the farming community. 5) Many small area plans were made because of the SD plan for couples only in 2014. Although the rural environment and living patterns were ignored in the SD, the diverse pattern language provided by the pattern language was developed as a SD element for rural houses, which is the most suitable housing plan for the farmers' livelihood pattern.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.256-266
• /
• 2019

There are many different job skill evaluation scales, but the development of the job skill scale for the workers in the local child care centers has much to be improved. The purpose of this study is to develop and validate the job skill scales for the workers of local child care centers. It is also the purpose of this study to specify the scope of work for such workers and define the job skills to develop a tool to evaluate the job skills of them, eventually. As for the study method, the researcher conducted literature review and Delphi survey to extract the job skill factors. Then, after going through a discussion with an expert, the researcher developed the preliminary questions to verify the validity of the contents and the certification validity. For this, a survey was conducted with the workers in local child care centers across the country, and a total of 221 questionnaires have been used for analysis. With this, a total of five job skill factors for such workers were identified, based on which 20 questions were developed to constitute the scale. The sub-factors identified were student supervision, program planning, child education, administrative works, and link-up with the local community. The confidence level of the scale developed in this study was Cronbach ${\alpha}=.940$(N=221). With the scale of the job skills of the workers in local child care centers, it would be possible to develop various job skill programs. And, this would be able to be used for evaluating the job skill levels of not only the workers in the local child care centers but also other child-care service providers.

• The Journal of the Korea Contents Association
• /
• v.19 no.4
• /
• pp.573-580
• /
• 2019

The purpose of this study is to establish the Police Reform Committee on May 10, 2017, with the aim of enforcing the nationwide autonomous police system in 2020. In addition, the government is promoting reforms of autonomous police and investigative structures, On April 5, 2018, a special committee of autonomous police system consisting of academics, civic groups, and legal professors was established. In 1991, the local council was established in Korea. In 1995, the local autonomous government era was launched with the election of local autonomous governors, but the field of security did not bring decentralization. This study suggests direction of organization and manpower management, personnel management and distribution, financial management, and political neutrality in order to introduce autonomous police system considering regional characteristics. Also, it should be promoted in the direction of maximizing the advantages of the decentralization system and national police without causing civil unrest and social disorder caused by the introduction of the rapid system. Self-governing police should reflect on the trend of autonomous decentralization in order to secure the Republic of Korea with a more secure policing policy, along with organic cooperation and mutual competition system with the national police.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.114-135
• /
• 2013

Among the UNESCO World Heritage Sites, the proportion of natural heritage to cultural heritage is relatively small. In 2007, the "Jeju Volcanic Island and Larva Tubes" was the first one that was designated as an UNESCO World Natural Heritage Site in Korea. The growing Korean geological heritage condition and conservation case studies on management of the geological heritage were examined in this study. Furthermore, the purpose of this study is to show future driving strategy for conservation and improvement plan on our geological heritage. Natural Monuments as a state-designated natural property and Geoparks as a new application system for geological heritage are important to conserve our geological heritage. Public engagement through establishment of visitor centers is definitely needed to improve education and promotion. The study includes field investigation for the "Wadden Sea", an World Natural Heritage Site for a mud flat, interviews with staffs and experts who are responsible for investigating and managing the site. Three factors can likely be attributed to its successful management and conservation policy for the "Wadden Sea". First of all, there is an operation for integrated management system and joint secretariat for research and monitoring. Next, researchers invigorate the visitor centers for promotion and education on geological heritage. Finally, experts and staffs implement various research topics and projects based on a long-range plan. The study was carried out to evaluate the present condition of our geological heritage and to make a proposal as a policy to improve value and conserve them. In conclusion, this study provided future discussion that may help researchers to make a decision on long-term policies for the geological subject of Korean natural heritage.

• The Korean Journal of Archival Studies
• /
• no.44
• /
• pp.5-49
• /
• 2015

Although a study on documentation strategy has been steadily releasing recently in the archival study field, it is rare that the cases or studies applying the institutional functional analysis methodology that Helen Samuels had suggested. The institutional functional analysis is a methodology to provide a comprehensive understanding of the record by defining the essential features of the institution at a macro level. The documentation area derived from the institutional functional analysis functions as a priori framework for an archivist to select and keep the records of the institution. In other words, by analyzing the function of the institution through the institutional functional analysis methodology, it makes possible to identify the functions not covered under the current records retention schedule at a macro level ensuring accountability of the organization's business activities. The documentation project of the United States is a prime example to comply with this background. In this study, by analyzing the case of the United States Congress, it is proposed the derived implications for applying the institutional functional analysis to the National Assembly of the Republic of Korea, where is the similar national institution to the U.S. Congress. For this purpose, firstly, the theoretical debate on the institutional functional analysis as the previous studies. Secondly, the documentation project of the United States Congress has been case analyzed by each function according to the institutional functional analysis. Thirdly, on the basis of the case study results, the implications are derived and it is suggested that the documentation areas applicable to the National Assembly of the Republic of Korea.

• The Journal of Bigdata
• /
• v.3 no.2
• /
• pp.19-33
• /
• 2018

Owing to the increase of FTA, food trade, and versatile preferences of consumers, food import has increased at tremendous rate every year. While the inspection check of imported food accounts for about 20% of the total food import, the budget and manpower necessary for the government's import inspection control is reaching its limit. The sudden import food accidents can cause enormous social and economic losses. Therefore, predictive system to forecast the compliance of food import with its preemptive measures will greatly improve the efficiency and effectiveness of import safety control management. There has already been a huge data accumulated from the past. The processed foods account for 75% of the total food import in the import food sector. The analysis of big data and the application of analytical techniques are also used to extract meaningful information from a large amount of data. Unfortunately, not many studies have been done regarding analyzing the import food and its implication with understanding the big data of food import. In this context, this study applied a variety of classification algorithms in the field of machine learning and suggested a data preprocessing method through the generation of new derivative variables to improve the accuracy of the model. In addition, the present study compared the performance of the predictive classification algorithms with the general base classifier. The Gaussian Naïve Bayes prediction model among various base classifiers showed the best performance to detect and predict the nonconformity of imported food. In the future, it is expected that the application of the abnormality detection model using the Gaussian Naïve Bayes. The predictive model will reduce the burdens of the inspection of import food and increase the non-conformity rate, which will have a great effect on the efficiency of the food import safety control and the speed of import customs clearance.

• The Korean Journal of Archival Studies
• /
• no.40
• /
• pp.95-130
• /
• 2014

Three frequently used documents by researchers on the Japanese colonial period-Classified Police Records of the Japanese Government-General of korea on the Anti-Japanese Movement 舊 朝鮮總督府 警務局 抗日獨立運 動關係 秘密記錄, Trial Records of Gyeongseong District Court 京城地方法院 裁判記錄 and Filed Documents of Gyeongseong District Court 京城地方法院 編綴文書(while the latter two were collected by the National Institute of Korean History, the former was collected by Asiatic Research Institute of Korea University)-are among the same records group that the Prosecutor's Office of Gyeongseong District Court produced through registration and compilation. As contents related to ideology suppression and thought control were numerous, it could be assumed that most of the materials were produced by the 'Department of Ideology' of the Prosecutor's Office. By examining the administrative records of the 1920's within this group, the process of how the 'Department of Ideology' was formed is clearly shown. As ideological movements for Korea's independence and revolution grew, execution of regulations was further expanded by the Prosecutor's Office. Since the mid-1920's, information on ideology had been separated from general information, was routinely collected heavily, and was considered more valuable than the general information. By the end of the 1920's, the term Ideology Prosecutor 思想係 檢事(meaning a prosecutor who specializes in ideology verification) and the named 'Department of Ideology'(思想部) emerged on the records.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.3-11
• /
• 2019

The construction of a facility is an act whereby infrastructure such as roads and railways and other facilities such as housing and office spaces are constructed, and due to the characteristics of the relevant industry where such construction is carried out in a custom order method, it requires a long period of time mostly. While the construction is carried out over a long period of time, fluctuations in the price of raw materials required for the construction occur. Therefore, the cost of the construction also fluctuates inevitably. The fluctuation of the construction cost meshes closely with the profit of a constructor and the efficiency of government spending. Therefore, it is necessary to maintain the construction cost at a reasonable level by adjusting the construction cost rationally in order to secure the required construction quality and spend the budget efficiently. The buffer system for solving such problem is the contract amount adjustment system by fluctuations in prices (Escalation/De-Escalation). In this study, the method combining the escalation method based on the item adjustment method was suggested for an efficient contract amount adjustment method. In addition, it is proposed that there be an investigation and codification of matters not applied to government acts and regulations on contracts related to the adjustment of fluctuations in prices legally.