• The Journal of Engineering Geology
• /
• v.17 no.2 s.52
• /
• pp.289-297
• /
• 2007

Slope failure that is occurred by rainfall generates a lot of property damages and loss of lives. Slope stability management and reinforcement countermeasure can be attained through continuous monitoring about various slope types that adjoin in human's life for reducing slope failure from natural and artificial cut slope hazards. The study area is rock slope that is consisted of gneiss, and large scale joint set is ranging by fault activity. This rock mass is exposed during long period and has lithological weathering property of weathered rock or soft rock. In-situ investigation carried out after divide by natural slope and cut slope. As a result, the natural slope appeared to high possibility of planar failure and wedge failure in few joint points that main joint set is formed. On the other hand, slope failure conformation in cut slope was superior only wedge failure occurrence possibility in eight joint points. In result of numerical analysis using SLIDE 2D, the minimum safety factor was analyzed slope stability for cut slope relatively low than natural slope in this study.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.385-392
• /
• 2018

The slope stabilization analysis was performed by conducting survey and selecting the representative section in order to improve slope composition and management technology of masonry embankments in the quarry area, The mean slope of the masonry retain wall (A, B, C, D, E, F) was $38.5^{\circ}$, although the steep slope of the lowest slope (A) as $59^{\circ}$. The horizontal distance of the masonry embankments is 66.2 m and the slope height is 48.3 m. However, the inclination of the masonry embankments is relatively steep and visually unstable. The slope stability analysis for the slope stability analysis was taken into account during the drying and saturation. The slope stability analysis during saturation was performed by modeling the fully saturated slope. The strength constants of the ground were divided into two groups. The safety factor for dry period was 1.850 and the safety factor for rainy season was 1.333. The safety rate of dry period and rainy season was above 1.5 and 1.2. However, the weathered granite on the upper part of the masonry embankments at the time of heavy rainfall is considered to have a high risk of slope erosion and collapse. Therefore, it is considered necessary to take measures for stabilization through appropriate maintenance such as drainage installation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.581-587
• /
• 2007

작년 7월 태풍 에위니아와 집중적인 호우는 강원도 지역에 많은 피해를 주었으며, 특히 강원도 인제, 양양, 평창 등의 지역에서 수십 명의 인명피해와 재산피해를 발생시켰다. 이로 인해 집중호우로 인한 사면 붕괴 및 산사태, 토석류 발생사례 및 하천과 인접한 도로 성토사면 붕괴 사례 등의 조사가 실시되고 수집된 자료를 분석, 문제점 제시 및 많은 대책방안들이 도출되었다. 이에 본고는 작년 수해현장들을 다시 찾아 수해복구 방법들을 조사하였으며, 수해복구사례를 소개함으로써 매년 여름철 발생되는 집중호우에 의한 자연재해 예방에 몸 담고 있는 관련자 및 토목기술자들에게 수해 저감 및 대책방안에 대한 일례를 전하고자 한다.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.12
• /
• pp.65-72
• /
• 2018

The uses of unmanned aerial vehicles (UAV) have been expanding in agriculture surveys, obtaining real time updates of dangerous facilities where human access is difficult, disaster monitoring, and 3D modeling. In reality, there is an upsurge in the application of UAVs in fields like, construction, infrastructure, imaging, surveying, surveillance and transportation. Especially, when the slope failure such as landslide occurs, the uses of UAVs are increasing. Since, the UAVs can fly in three dimensions, they are able to obtain spatial data in places where human access is nearly impossible. Despite of these advantages, however, the uses of UAVs are still limited during slope failure. In order to overcome these limitations, this study computes the soil volume change during slope failure through the computation technique using photogrammetric information obtained from UAV system. Through this study, it was found that photogrammetric information from UAV can be used to acquire information on amount of earthworks required for repair works when slope collapse occurs in mountainous areas, where human access in difficult.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.45-54
• /
• 2008

Based on the data obtained from field investigation and soil testing to slope hazards occurrence section and non-occurrence section in gneiss area, a prediction technique was developed by the use of a decision tree model, which is one of the statistical analysis methods. The slope hazards data of Seoul and Kyonggi Province, which were induced by heavy rainfall in 1998, were 104 sections in gneiss area. The number of data applied in developing prediction model was 61 sections except a vacant value. Among these data, the number of data occurred slope hazards was 34 sections and the number of data non-occurred slope hazards was 27 sections. The statistical analyses using the decision tree model were applied to chi-square statistics, gini index and entrophy index. As the results of analyses, a slope angle, a degree of saturation and an elevation were selected as the classification standard. The prediction model of decision tree using entrophy index is most likely accurate. The classification standard of the selected prediction model is composed of the slope angle, the degree of saturation and the elevation from the first choice stage. The classification standard values of the slope angle, the degree of saturation and elevation are $17.9^{\circ}$, 52.1% and 320 m, respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.2 s.32
• /
• pp.45-50
• /
• 2005

Recently, slope failures are disastrous when they occur in mountainous area adjoining highways. The accidents associated with Slope failures have increased due to rapid urbanization of mountainous area. Therefore, the inspection of slope is conducted to maintain road safety as well as road function. In this study, we apply to the remedy which is comparing existent description to advanced technology using GIS. we utilize a 3D scanner, one of the advanced method, to generate precise and complete road slope model from expert point of view. In result, we are transferred practical data from external slope stability to hazard slope information. We suggest not only the database but also the method of road risk evaluation based on GIS.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.447-456
• /
• 2020

The study area is a slope in Dogye-eup, Samcheok-si, Gangwon-do. The cutting method was applied to this slope for stabilization in 2009 due to the influence of the waste-rock dump located at the top of slope. Recently, soil cracks and creep have occurred on this slope, and the drainage channel was damaged. Therefore, it was analyzed the topography change through photogrammetry using a UAV. Orthophotos were taken in April and October 2019 respectively. From the Orthophots, Digital Surface Model (DSM) was extracted. Time series analysis was performed by comparing each DSM. The topography of October was pushed forward while maintaining the topography of April. Through these features, it is judged that the soil creep is occurring in this study area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.169-175
• /
• 2006

Recently, slope failures are disastrous when they occur in mountainous area adjoining highways. The accidents associated with slope failures have increased due to rapid urbanization of mountainous area. Therefore, the inspection of slope is conducted to maintain road safety as well as road function. In this study, we apply to the remedy which is comparing existent description to advanced technology using GIS. We utilize a Terrestrial LiDAR, one of the advanced method, to generate precise and complete road slope model from expert point of view. In result, we extract hazardous slope information from external measurements referring to the evaluation criteria of external slope stability. We suggest not only the database but also the method of road risk evaluation based on internet GIS.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1817-1821
• /
• 2010

본 연구에서의 지리정보시스템(GIS)을 이용한 사방댐 입지선정모델 개발은 산사태 발생 예측을 위한 사면안정성 평가 기준을 개발하여 사방댐 지점을 선정하기 위하여 체계적으로 표준화된 시스템을 구축하는 것이 목표이며, 2002년 태풍 '루사'와 2003년 태풍 '매미'에 의하여 토석류와 산사태가 발생한 서부경남 지역의 38개 지점에 대하여 항공사진 수집 및 현장조사를 수행하고, 산사태 발생에 관계되는 강우, 지형, 지질 및 토양, 임상 등을 인자로서 규정하였다. 연구결과 서부경남지역에서 발생한 산사태는 지리산, 가야산, 좌굴산 등 EL. 500m 이상의 비교적 고도가 높은 산악지역에서 지형성 집중호우에 의하여 발생하는 것으로 분석되었으며, 강우량과 산사태의 상관분석결과 시강우량 70mm 이상 및 누가강우량 230mm 이상에서 산사태의 발생빈도가 높은 것으로 나타났다. 또한 산사태 발생지점에서의 고도(평균해수면 기준)와 능선의 고도와의 비를 백분율로 계산하여 빈도를 살펴보면 산사태 발생지점이 능선의 90% 이상의 고도에서 산사태의 발생빈도가 53%로 가장 높고, 80-90%는 21%, 70-80% 16%의 순으로 산사태 발생빈도가 감소하고 있으며, 고도가 더욱 낮아져 산사태 발생지점이 60% 이하로 내려가면 산사태 발생빈도는 급격히 감소한다. 예를 들어 능선의 고도가 1000m일 경우 900m 이상의 고도(90% 이상)에서 산사태 발생빈도가 가장 높고 600m 이하의 고도(70% 이하)에서는 발생빈도가 급격히 저하하는 것으로 나타났다. 산사태 발생지점의 표면 굴곡도에 따른 산사태의 발생빈도는 대부분의 평행사면에서 74%, 약간 오목사면에서 26%가 발생하는 것으로 나타났다. 각 지구의 지질 및 토양별 산사태 발생빈도는 화성암계열의 지질 및 자갈/암괴 섞인 토사의 토양에서 발생하는 것으로 분석되었고, $34-40^{\circ}$ 사면경사에서 40%, $26-34^{\circ}$ 사면경사에서 26%, $26^{\circ}$ 이하의 사면경사에서 22%가 주로 발생하였으며, $40^{\circ}$ 이상의 높은 사면경사에서는 극히 미미하였다. 또한 임상 기준으로는 침엽수림에서 주로 발생하는 것으로 나타났다. 본 연구에서는 이상의 결과를 기초로 매우 안정, 안정, 부분적 안정, 불안정, 매우 불안정, 위험 지역으로 구분하고, 평가한 결과는 불안정 33개소, 매우 불안정 5개소 등 38개소 지점 모두에 사방댐 설치가 필요한 것으로 분석되었다.

• The Journal of Engineering Geology
• /
• v.20 no.4
• /
• pp.391-399
• /
• 2010

We performed a hydraulic analysis based on the wetness index of talus slopes in Jungsun, Gangwon province. We estimated the relation between the degree of development of the temporary water system, and talus topography and distribution. We also assessed the distribution of talus based on a map of the wetness index. We divided areas of tallus into stable and unstable types, and estimated the size, distribution and shape-preferred orientation of clasts. We performed numerical simulations of rockfall events to assess the optimum location of rockfall barriers upon talus slopes.