• Journal of Dairy Science and Biotechnology
• /
• v.34 no.1
• /
• pp.37-41
• /
• 2016

Melatonin is a hormone produced by the pineal gland in dark conditions. It plays a major role in the regulation of the sleep-wake cycle. Melatonin synthesis is known to be suppressed by environmental light. Cortisol is a steroid hormone that is a major indicator of physiological alterations due to stressful stimuli. It also displays a circadian rhythm, like melatonin. The highest levels are encountered during early morning and the lowest levels are observed at around midnight. In the present study, the effects of milking time on the melatonin and cortisol concentrations of raw milk and milk powder at the summer and winter solstices were examined. The melatonin concentration in milk increased significantly if cows were milked in the dark at night (p<0.05). The melatonin concentration in milk powder showed the same pattern with respect to the milking time (p<0.05). However, no significant difference in the cortisol concentration was observed between day- and night-time milk. Although the time of day did not affect the level of milk cortisol, seasonal factors affected the release of cortisol in milk (p<0.05). In conclusion, night-time milk is rich in endogenous melatonin. In this respect, it has potential applications for the development of melatonin rich-dairy products, which serve as natural sources of melatonin.

• Conservation Science in Museum
• /
• v.4
• /
• pp.71-78
• /
• 2003

The wooden striker on the Divine Bell of King Seongdeok was examined to identify the species of the wood and the outdoor wood weathering caused by solar light, moisture, temperature and air. The species of the wooden striker was identified to Zelkova serrata. When observed the striker with naked eyes, the results were surface discoloration (graying), cracking and roughness. In order to examine the morphological changes according to deterioration type, the specimen were separated to three part(I, II,III-spot). The I-spot was discolored to gray and at the same time entirely covered with dust. So the observation was impossible. The II-spot was also discolored but its texture could be observed. On it could observe numerous fungal hypae and dirts like dust flown into the cell lumens. The cell wall has been so weakened by weathering that it lost the physical intensity. This have made microchecks and splits on the cell wall. Although fungal hypae covered the cell, they did not result in wood decay. The III-spot, located just 0.5 mm below the surface, was maintaining the natural red-brown color of the wood. Its cell wall was similar to that of sound wood. These changes are different from wood decay, and limited only to the surface of the striker-less than or equal to 0.5 mm below.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.59-70
• /
• 2021

This paper studies and analyzes the effect of illustrations in picture books on time representation with fictional picture books as the study scope. In this paper, the time type of picture books can be divided into time point, timeline and time rhythm, referring to case analysis from time symbolic elements, picture layout and picture sequence respectively. First of all, time symbolic elements are referred to the time point and time rhythm. The materialized time symbolic element is things that can directly represent time and trigger associations with time; the color symbolic element means the color changes in the real world within a certain time; the contrast of light and shadow corresponds to the changes in a day. Fast-moving objects will be presented with dashed or blurred lines, while static, stable and slow objects will be depicted with solid lines. Secondly, the picture layout of illustrations in picture books is suitable for representing the content of the timeline and describing the sequence or causality of events. Finally, the picture sequence can represent the timeline, time rhythm and "synchronicity". It will make use of visual logic to win readers' trust in time information expressed in pictures, and then follow and connect viewpoints on the basis of adapting to reading habits. The essence of time representation in picture books is to express time by space, and use different combinations of elements in space and visual guidance to convey time information.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.142-145
• /
• 2019

Normally, a corner cube retroreflector (CCRR) sheet is used as a retroreflective mirror array (RRMA) in a volumetric display. Each CCRR unit reflects light in the retroreflective direction, which is parallel to the incident light, and it makes a blurred image, as it shifts the position of light within its dimensions. Adopting a "curved planar wall" and "parabolic focusing" (x-axis), a hybrid-t(transverse direction)-RRMA is proposed, to improve the image quality and brightness. The improvement of image contrast is achieved by tuning a "linear v-shaped groove" structure to a "parabolic v-shaped groove". Also, the system has been simplified and the brightness enhanced 4 times by removing the half mirror.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.54-60
• /
• 2019

Recently, various composite materials for additive manufacturing are interested to expand the application field of 3D printing. 3D printing technique was mainly developed using polymer, and ceramic materials for 3D printing are still in the early stage of research due to the requirement of high solid content and post treatment process. In this study, silica particles with various diameters were surface treated with silane coupling agent, and synthesized as silica composite with photopolymer to apply DLP 3D printing process. DLP is an additive manufacturing technology, which has high accuracy and applicability of various composite materials. The rheological behavior of silica composite was analyzed with various solid contents. After DLP 3D printing was performed using silica composites, the printing accuracy of the 3D printed specimen was less than about 3 % to compare with digital data and he bending strength was 34.3 MPa at the solid content of 80 wt%.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.416-424
• /
• 2023

Concrete emits a large amount of carbon dioxide throughout its life cycle, and due to the societal demand for carbon dioxide reduction, research on storing carbon dioxide in concrete in the form of minerals is ongoing. In this study, cyanobacteria, which absorb carbon dioxide through photosynthesis and fix it as calcium carbonate, were applied to a porous concrete substrate, and the changes in the properties of the concrete substrate due to their special environmental curing condition were analyzed. The results showed that the calcium carbonate precipitation by the microorganisms was concentrated in the light-exposed surface area, and most of the precipitation occurred in the cement paste part, not in the aggregate. This microbially induced calcium carbonate precipitation enhanced the mechanical performance of the paste and improved the overall compressive strength as the curing age progressed. In addition, the increase in microbial biofilm and calcium carbonate improved the pore structure, which influenced the reduction in water permeability.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.19-19
• /
• 2021

경남 양산의 천성산에서만 생육하는 산림청·국립수목원 지정 희귀식물(Critically Endangered, CR) 주걱댕강나무 개체군을 대상으로 20개소의 방형구(10×10m, 100m²) 내 개체의 특성(개체수, 개화, 결실 등), 종자의 활력검정, 차광처리에 따른 생육 특성 및 우리나라 전역의 생육가능성에 대해 알아보았다. 20개소의 대상지에서 확인한 개체수는 총 3,270개체이며, 평균 개체밀도는 1.635/m²이다. 평균 수고는 1.1m 정도이며, 평균개화율은 27.37%이고 개화는 1.0~1.8m(평균수고 1.39m) 수고에서 집중되었다. 한편, 결실률은 평균 1.67%로 매우 낮았다. 종자의 크기는 평균 너비 0.27mm, 높이 0.18mm 정도로 너무 작아 X-ray 촬영을 통한 충실검정은 확인할 수 없었다. 종자를 1% Agar배지에 종자를 치상한 후 온도조건(15, 20, 25℃)에 따른 실험 및 온도(15, 20, 25℃)와 GA3 농도(100, 250, 500PPM)처리 실험 모두 발아율은 0%였다. 결실률이 매우 낮고, 종자 발아율 또한 낮으며 지하경을 뻗는 특성으로 보아 종자는 휴면종자이며 영양생장을 취하는 것으로 판단된다. 차광처리에 따른 생육 특성 실험 결과, 신초는 평균 30.6mm 성장, 엽록소 평균 함량 25.30, 잎의 수 평균 8.32개, 잎 길이 평균 35.93mm, 잎 폭 평균 20.37mm정도 성장하여 엽면적은 평균 761.10mm로 나타났다. 생육은 조도계를 활용한 실 차광률로 볼 때, 67.8% > 82.8% > 88.2% > 43.2% > 91.9%의 순서로 나타났다. 주걱댕강나무 자생지 내 수관열림도가 21.86%로 이를 차광률로 환산할 경우 70%내외의 차광률에서 생육이 효율적인 것을 확인하였다. 기후대별로 5개소에 이식한 주걱댕강나무는 이듬해까지 모두 생육이 원활하였다. A. spathulata를 Diabelia ionostachya종들과 가까운 유연관계를 가진다는 연구에서 D. ionostachya 샘플은 위도상 강원도 고성군에 속하고 있어 우리나라 대부분 지역에서 식재가 가능할 것으로 판단된다.

• Radiation Oncology Journal
• /
• v.10 no.2
• /
• pp.219-225
• /
• 1992

Fifty patients with carcinoma of the uterine cervix received curative radiotherapy by external irradiation of the whole pelvis and intracavitary radiation at the Department of Therapeutic Radiology, Kangnam St. Mary's Hospital from September, 1983 to October, 1986. External beam whole pelvic irradiation was done first up to 4500-5940 cGy in 5 weeks to 6.5 weeks, followed by an intracavitary radiation. Total dose of radiation to point A varied from 6500 cGy to 11344 cGy (average 6764 cGy). Of the 50 patients, one patient was lost to follow up and follow up period of the remaining 49 patients ranged from 3 months to 93 months (median 32 months). According to FIGO classification, 6 ($12.2\%$) were in stage Ib, 6 ($12.2\%$) in stage IIa, 25 ($51\%$) in stage IIb, 7 ($14\%$) in stage III, and 5 ($10.2\%$) in stage IV. Age of the patients ranged from 33 to 76 years (median 60 years). Pathologically, fourty six ($94\%$) patients had squamous cell carcinoma, 2 ($4\%$) had adenocarcinoma, and 1 ($2\%$) had adenosquamous cell carcinoma. Overall response rate was $84\%$. 5-year survival rate was $49\%$ for entire group ($75\%$ for stage Ib, $83\%$ for Stage IIa, $42.5\%$ for stage IIb, $25\%$ for stage III, $40\%$ for stage IV). Complications were observed in 11 ($22.4\%$) patients, who revealed rectal complications with most common frequency. Others were self limiting trifle ones such as wet desquamation, fatigue, mild leukopenia, etc. The correlation of the survival rate with various factors (age, dose, Hb level, pelvic lymph node status, performance status, local recurrence) was evaluated but showed no statistical significance except the age and local recurrence in this series; survival of patients less than 50 years of age was worse than that of the older, and the presence of local recurrence had worse prognosis (p<0.05).

• Journal of the Korean Society of Radiology
• /
• v.8 no.4
• /
• pp.181-187
• /
• 2014

The purpose of this study were to analyze the characteristic of the glow curves in order to the glow temperature of the thermoluminescent dosimeters (TLDs) for the absorbed dose measurement of the radiation therapy. In this study, we was used the TLDs of the LiF:Mg${\cdot}$Ti, LiF:Mg${\cdot}$Cu${\cdot}$P, $CaF_2$:Dy, $CaF_2$:Mn (Thermo Fisher Scientific Inc., USA). The source-to-solid dry phantom (RW3 slab, IBA Dosmetry, Germany) surface distance was set at 100 cm, and the exposure dose of 100 MU (monitor unit) was used 6- and 15-MV X-rays, and 6- and 12-MeV electron beams in the reference depth, respectively. After the radiations exposure, we were to analyze the glow curves by using the TL reader (Hashaw 3500, Thermo Fisher Scientific Inc., USA) at the fixed heating rate of $15^{\circ}C/sec$ from $50^{\circ}C$ to $260^{\circ}C$. The glow peaks, the trapping level in the captured electrons and holes combined with the emitted light, were discovered the two or three peak. When the definite increasing the temperature of the TLDs, the maximum glow peak representing the glow temperature was follow as; $LiF:Mg{\cdot}Ti$: $185.5{\pm}1.3^{\circ}C$, $LiF:Mg{\cdot}Ti$: $135.0{\pm}5.1^{\circ}C$, $CaF_2$:Dy: $144.0{\pm}1.6^{\circ}C$, $CaF_2$:Mn: $294.3{\pm}3.8^{\circ}C$, respectively. Because the glow emission probability of the captured electrons depend on the heating temperature after the exposure radiation, TLDs by applying the fixed heating rate, the accuracy of measurement will be able to improve within the absorbed dose measurement of the radiation therapy.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_2
• /
• pp.721-732
• /
• 2017

With the increasing socio-economic importance of rice as a global staple food, several models have been developed for rice yield estimation by combining remote sensing data with carbon cycle modelling. In this study, we aimed to estimate rice yield in Korea using such an integrative model using satellite remote sensing data in combination with a biophysical crop growth model. Specifically, daily meteorological inputs derived from MODIS (Moderate Resolution imaging Spectroradiometer) and radar satellite products were used to run a light use efficiency based crop growth model, which is based on the MODIS gross primary production (GPP) algorithm. The modelled biomass was converted to rice yield using a harvest index model. We estimated rice yield from 2003 to 2014 at the county level and evaluated the modelled yield using the official rice yield and rice straw biomass statistics of Statistics Korea (KOSTAT). The estimated rice biomass, yield, and harvest index and their spatial distributions were investigated. Annual mean rice yield at the national level showed a good agreement with the yield statistics with the yield statistics, a mean error (ME) of +0.56% and a mean absolute error (MAE) of 5.73%. The estimated county level yield resulted in small ME (+0.10~+2.00%) and MAE (2.10~11.62%),respectively. Compared to the county-level yield statistics, the rice yield was over estimated in the counties in Gangwon province and under estimated in the urban and coastal counties in the south of Chungcheong province. Compared to the rice straw statistics, the estimated rice biomass showed similar error patterns with the yield estimates. The subpixel heterogeneity of the 1 km MODIS FPAR(Fraction of absorbed Photosynthetically Active Radiation) may have attributed to these errors. In addition, the growth and harvest index models can be further developed to take account of annually varying growth conditions and growth timings.