• Title/Summary/Keyword: 비 지연

Search Result 3,716, Processing Time 0.034 seconds

Introduction of Numerical Simulation Techniques for High-Frequency Combustion Instabilities (고주파 연소불안정 예측을 위한 해석기술 개발 사례)

  • Kim, Seong-Ku;Joh, Miok;Han, Sanghoon;Choi, Hwan-Seok
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.68-77
    • /
    • 2017
  • High-frequency combustion instability results from a feedback coupling between the unsteady heat release rate and the acoustic waves formed resonantly in the combustion chamber. It can be modeled as thermoacoustic problems with various degrees of the assumptions and simplifications. This paper presents numerical analysis of self-excited combustion instabilities in a variable-length lean-premixed combustor and designs of passive control devices such as baffle and acoustic resonators in a framework of 3-D FEM Helmholtz solver. Nonlinear behaviors such as steep-fronted shock waves and a finite amplitude limit cycle are also investigated with a compressible flow simulation technique.

  • PDF

Study of High-Speed NGN Resource Control Schemes (NGN 자원제어 스킴의 고속화 방안에 관한 연구)

  • Cha, Young-Wook;Han, Tae-Man;Jeong, You-Hyeon
    • The KIPS Transactions:PartC
    • /
    • v.16C no.3
    • /
    • pp.383-392
    • /
    • 2009
  • Next generation network (NGN) is a packet-based converged network to support session and non-session services in QoS-enabled broadband transport network. QoS based resource control must be defined to support differentiated services for various network users in NGN. This paper defined parallel control schemes for NGN resource control interfaces to minimize session and resource control delays. We simulated the existing and proposed NGN control schemes to measure and analyze control delays and completion ratios. By arrival rate of 120 in two-phase resource control, we checked out that completion ratios of sequential and parallel schemes achieved 100%, and the control delay of parallel scheme was improved by about 21.5% compared to that of sequential scheme.

Cooperative Diversity using Cyclic Delay for OFDM systems (OFDM 시스템을 위한 순환 지연을 사용하는 협력 다이버시티 기법)

  • Lee, Dong-Woo;Jung, Young-Seok;Lee, Jae-Hong
    • Journal of Broadcast Engineering
    • /
    • v.13 no.2
    • /
    • pp.172-178
    • /
    • 2008
  • Orthogonal Frequency Division Multiplexing (OFDM) is one of the most promising technologies for high data rate wireless communications. OFDM has been adopted in wireless standards such as digital audio/video broadcasting. The combination of OFDM and cooperative diversity techniques can provide the diversity gain and/or increased capacity. In this paper, the cooperative coding using cyclic delay diversity (CDD) for multiuser OFDM systems is introduced. To improve the beneficial effects of relays's cooperation, CDD is adopted in cooperative transmission of relays. Simulation results show the bit error rate (BER) for various consideration. The proposed scheme provides improved performance compared to delay.

Ellipsometric Expressions for a Near-normal-incidence Ellipsometer with the Polarizer-compensator-sample-compensator-analyzer Configuration (편광자-보정기-시료-보정기-검광자 배치를 가지는 준 수직입사 타원계의 타원식)

  • Kim, Sang Youl
    • Korean Journal of Optics and Photonics
    • /
    • v.32 no.4
    • /
    • pp.172-179
    • /
    • 2021
  • A near-normal-incidence ellipsometer (NNIE) is suggested as an optical critical dimension (OCD) measurement system that is highly sensitive to the bottom defect of a sample with high-aspect-ratio structured patterns. Incident light passes through a polarizer and a phase retarder in sequence, and the reflected light from the sample also passes through them, but in reverse order. The operating principle of this NNIE, where a single polarizer and a single phase retarder are shared by the incident and reflected light, is studied, and a method to determine the ellipsometric constants from the measured intensities at proper combinations of the azimuthal angles of polarizer and retarder is presented.

High speed Control of Robot Manipulator using Time Delay Control and Time Delay Observer (시간지연제어기와 관측기를 사용한 로봇의 고속제어)

  • Lee, Jeong-Wan;Kang, Shin-You
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.7 no.2
    • /
    • pp.187-192
    • /
    • 2004
  • 본 논문에서는 시간지연 제어기와 관측기를 사용하여 산업용 로봇을 위한 고속 제어 방법을 설계하였다. 설계된 방법은 로봇의 매개변수 변화나 비선형이 존재하는 상황에서도 강인한 제어성능을 보이게끔 개발되었으며, 실제구현을 하였을 때도 계산량이 적으면서 동시에 구현이 쉬운 방법이다. 평면 2 자유도 스카라 로봇의 적용을 통하여 실험을 하였는데, 그 결과 실제 시스템에 효과적으로 적용될 수 있음 확인하였다.

  • PDF

A Study for the application of UVLS in KEPCO System (한전계통에서 저전압 부하차단의 기법 연구)

  • Lee, Sang-Ho;Kang, Sang-Hee;Lee, Sung-Jin;Oh, Hwa-Jin;Jang, Byung-Tae
    • Proceedings of the KIEE Conference
    • /
    • 2003.11a
    • /
    • pp.10-13
    • /
    • 2003
  • 계통에 발생하는 불안정 현상을 억제하기 위한 방법으로 저주파수 부하차단과 저전압 부하차단이 있다. 저전압 부하차단은 저주파수 부하차단에 비해 지역적 특성이 강하기 때문에 일반적인 기준이 제시되어 있지 않다. 본 논문에서는 정적 모의를 통하여 저전압 기준치를 결정하는 기법을 제안하고 동적 모의를 통하여 이를 검증하고 시지연값도 결정하도록 하였다.

  • PDF

Design of an Area-Efficient Survivor Path Unit for Viterbi Decoder Supporting Punctured Codes (천공 부호를 지원하는 Viterbi 복호기의 면적 효율적인 생존자 경로 계산기 설계)

  • Kim, Sik;Hwang, Sun-Young
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.3A
    • /
    • pp.337-346
    • /
    • 2004
  • Punctured convolutional codes increase transmission efficiency without increasing hardware complexity. However, Viterbi decoder supporting punctured codes requires long decoding length and large survivor memory to achieve sifficiently low bit error rate (BER), when compared to the Viterbi decoder for a rate 1/2 convolutional code. This Paper presents novel architecture adopting a pipelined trace-forward unit reducing survivor memory requirements in the Viterbi decoder. The proposed survivor path architecture reduces the memory requirements by removing the initial decoding delay needed to perform trace-back operation and by accelerating the trace-forward process to identify the survivor path in the Viterbi decoder. Experimental results show that the area of survivor path unit has been reduced by 16% compared to that of conventional hybrid survivor path unit.

Asynchronous Circuit and System Design (비동기 회로 및 시스템 설계)

  • Park, Y.S.;Park, I.H.
    • Electronics and Telecommunications Trends
    • /
    • v.13 no.1 s.49
    • /
    • pp.41-51
    • /
    • 1998
  • 전역 클럭을 사용하는 동기 회로 설계 기술은 설계의 단순화 및 자동화가 용이하기 때문에 현재 많이 사용하는 설계 기술이다. 그러나 다양한 기능과 고성능을 필요로 하는 대규모 시스템이나 회로 설계에서는 전역 클럭 사용으로 인한 신호 지연, 전력 소모 등이 문제로 부각되면서 비동기 회로 설계 기술이 각광을 받고 있다. 비동기 회로 설계 기술은 1940년대에 개발된 기술이지만 설계 자체가 어렵고 면적 증가 등의 단점으로 제한된 분야에서 이용되었다. 현재 이러한 단점을 극복하기 위한 연구가 회로 설계, 검증, 동기/비동기 인터페이스, 그리고 저전력 회로 등의 분야에서 많이 진행되고 있다.

The Enhanced Analysis Algorithm for an EMFG′s Time transition Operation (EMFG의 시간 트랜지션 동작해석 알고리즘)

  • 박동진;박희광;여정모
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2002.05c
    • /
    • pp.33-37
    • /
    • 2002
  • 기존 EMFG의 동작해석 알고리즘에서 마크벡터는 정확한 시간 간격이 아닌 각 스텝의 변화를 나타내는 것이었다. 그래서 시간 트랜지션이 있는 EMFG의 경우에는 정해진 지연시간 이외의 필요 없는 시간이 발생하였다. 본 연구에서는 이를 개선하여 초기완료비벡터를 적용하였고, 시간 트랜지션을 가진 EMFG에 대하여 시간의 흐름에 따른 점화가능벡터와 예상완료비를 산출하고, 현완료비에 따라 달라지는 경과완료비를 수학적으로 판단할 수 있도록 개선된 알고리즘을 제안하였다. 제안된 알고리즘을 무인 운전 시스템에 적용하여 시간 흐름에 따른 마크벡터의 변화를 입증하였다. 설계된 EMFG를 개선된 알고리즘에 따라 해석하게 되면, 시스템의 분석 및 설계가 용이하여, 시스템의 성능향상에 도움을 줄 것으로 기대된다.

  • PDF

A Robust Adaptive MIMO-OFDM System Over Multipath Transmission Channels (다중경로 전송 채널 특성에 강건한 적응 MIMO-OFDM 시스템)

  • Kim, Hyun-Dong;Choe, Sang-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.7A
    • /
    • pp.762-769
    • /
    • 2007
  • Adaptive MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system adaptively changes modulation scheme depending on feedback channel state information (CSI). The CSI feedback channel which is the reverse link channel has multiple symbol delays including propagation delay, processing delay, frame delay, etc. The unreliable CSI due to feedback delay degrades adaptive modulation system performance. This paper compares the MSE and data capacity with respect to delay and channel signal to noise ratio for the two multi-step channel prediction schemes, CTSBP and BTSBP, such that robust adaptive SISO-OFDM/MIMO-OFDM is designed over severe mobile multipath channel conditions. This paper presents an interpolation method to reduce feedback overhead for adaptive MIMO-OFDM and shows MSE with respect to interpolation interval.