• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.814-816
• /
• 2001

최근 정보 통신 기술의 발전에 따라 음성 서비스 등과 같은 단일 서비스를 제공하던 무선 통신망이 음성, 데이터, 고화질 정지화면, 동영상 및 다양한 정보형태의 멀티미디어 데이터 서비스를 추구하고 있다. 효율적인 실시간 멀티미디어 데이터 전송을 위해서는 실시간 데이터의 지연한계를 보장하고 비 실시간 멀티미디어 데이터들의 데이터 손실을 최소화해야 한다. 무선 ATM망은 기본적으로 ATM 전송방식을 사용하고 있지만 유선 ATM망에 비해 제한된 대역폭파 높은 전송지연, 비트 에러율과 이동성이라는 특수성을 고려하여 유선 ATM망과 많은 차이가 있다. 무선 ATM망에서 실시간 멀티미디어 데이터 서비스 전송을 위한 스케줄링 방법으로 유선 ATM망에서 실시간 멀티미디어 데이터 서비스를 위해 적용되는 TCRM(Traffic-Controlled Rate Monotonic Priority scheduing)정책을 Uplink 와 Downlink 시 각각 다른 방법으로 적용하여 실시간 멀티미디어 데이터 전송 스케줄링 정clr을 제안하고, 예약버퍼(reservation buffer) 와 임의의 전송 속도 P$_{k}$ 를 사용하여 TCRM의 단점인 비 실시간 데이터에 대한 비효율성 문제 해결안을 제시한다.

• Journal of Welding and Joining
• /
• v.14 no.2
• /
• pp.79-89
• /
• 1996

일정진폭하중과 과대하중비 2.5의 단일 인장과대하중에 의한 4140강 용접부 의 피로균열성장거동을 실온과 -45.deg.C의 저온에서 피로시험과 파면관찰을 통하여 고찰하였다. 이때, 용접부 미시조직의 영향을 평가하기 위해 모재(parent metal), 열영향부(as-welded HAZ), 열처리된 열영향부(PWHT HAZ)로 나누어 응력비 0과 0.5로 CT시험편을 이용하여 피로시험을 실시하였다. 피로균열성장거동은 재료의 미시조직과 온도변화보다는 응력비에 크게 영향을 받았으며, 단일 과대하중에 의한 피로균열성장 지연효과가 모든 재료에서 상당히 크게 나타났다. 전자현미경에 의한 피로파면 관찰 결과, 실온에서는 연성의 스트라이에이숀과 -45.deg.C에서는 의벽개파면과 같은 피로 균열성장거동을 나타내고 있다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.10-13
• /
• 2010

세그먼트 자중 등에 의한 휨모멘트와 케이블 수직압축력에 의한 합성응력이 발생되고 바닥판 경간비가 변하는 사장교의 시공단계에서는 전단지연의 영향범위가 다를 수 있다. 이 연구에서는 1면 케이블 콘크리트 박스 사장교를 대상으로 시공단계시 보강형에 고려되어야 할 합성응력에 의한 유효플랜지폭을 분석하였다. 그 결과 바닥판 경간비가 0.38 이하의 범위에서 보강형의 전폭을 유효플랜지폭으로 적용할 수 있는 것으로 해석되었다. 따라서 시공단계시 변화되는 바닥판 경간비의 크기에 관계없이 전폭을 유효플랜지폭으로 반영하는 실무관행은 안전측 설계가 되지 못할 수 가 있다. 바닥판 경간비가 작아짐에 따라서는 전폭과 캔틸레버 구조계로 유효플랜지폭을 결정하는 것이 타당하다. 이 연구에서는 수직력에 대한 도로교설계기준의 유효플랜지폭 규정에 대한 평가도 수행하였다.

• Journal of Radiation Protection and Research
• /
• v.32 no.4
• /
• pp.178-183
• /
• 2007

Neutrons are high LET (linear energy transfer) radiation and cause more damage to the target cells than x-rays or gamma rays. The damage from neutrons is generally considered fatal to a cell and neutrons have a greater tendency to cause cell death through direct interaction on DNA. We performed experiments to measure growth delay ratio and oxygen enhancement ratio (OER) in mouse model system. We inoculated EMT-6 cells to the right hind leg of BALB-c mouse and X-rays and neutron beams were given when the average volume of tumors reached $200-300mm^3$. We irradiated 0, 11, 15.4 Gy of X-ray and 0, 5, 7 Gy of fast neutron beam at normoxic and hypoxic condition. The volume of tumors was measured 3 times per week. In x-ray experiment, growth delay ratio was 1.34 with 11 Gy and 1.33 with 15.4 Gy in normoxic condition compared to in hypoxic condition, respectively. In neutron experiment, growth delay ratio was 0.94 with 5 Gy and 0.98 with 7 Gy, respectively. The OER of neutron beam was 0.97. The neutron beam was more effective than X-ray in the control of hypoxic tumors.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.23-29
• /
• 2016

This paper presents balancing control of a two-wheel mobile robot (TWMR). TWMR is aimed to maintain balance while moving. Although TWMR can be controlled by linear controllers such as PD controller, time-delayed controller is employed for robustness. Performances of PD controllers and time-delayed controllers are compared. Especially, experimental studies on different acceleration estimation for the time-delayed controller are conducted. Performances by different acceleration estimations of the balancing angle, of the position, and of both angle and position are compared empirically.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.600-609
• /
• 2009

The traditional carrier sense multiple access (CSMA) protocol like IEEE 802.11 Distributed Coordination Function (DCF) does not handle the constraints adequately, leading to degraded delay latency and throughput as the network scales are enlarged. We present more efficient method of a medium access for real-time wireless sensor networks. Proposed MAC protocol is like the randomized CSMA protocol, but unlike previous legacy protocols, it does not use a time-varying contention window from which a node randomly picks a transmission slot. To reduce the latency for the delivery of event reports, we carefully decide to select a fixed-size contention window with non-uniform probability distribution of transmitting in each slot. We show that the proposed method can offer up to severaansimes latency reduction compared to legacy of IEEE 802.11 as the size of the sensor network scales up to 256 nodes using widely using network simulation package,caS-2. We finally show that proposed MAC scheme comes close to meet bounds on the best latency being achieved by a decentralized CSMA-based MAC protocol for real-time wireless sensor networks which is sensitive to delay latency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.909-915
• /
• 2008

Researches for time delay estimation had been studied broadly. However studies about factors for time delay estimation are insufficient, especially in case of real environment application. In 1997, Brandstein and Siverman announced that performance of time delay estimation deteriorates as reverberant time of room increases. Even though reverberant time of room is same, performance of estimation is different as the specific part of signals. In order to know that reason, we studied and analyzed the factors for time delay estimation using speech signal and room impulse response. In result, we can know that performance of time delay estimation is changed by different R/D ratio and signal characteristics in spite of same reverberant time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2569-2575
• /
• 2015

Network RTK generally uses a linear interpolation method by using the corrections from reference stations. This minimizes the spatial decorrelation error caused by the increase of distance between the reference station's baseline and user's baseline. However, tropospheric delay, a function of the meteorological data can cause a spatial decorrelation characteristic among reference stations within a network by local meteorological difference. A non-linear characteristic of tropospheric delay can deteriorate Network RTK performance. In this paper, the modeling of tropospheric delay irregularity is made from the data when the typhoon is occurred. By using this modeling, analyzing the effect of meteorological difference between reference stations on correction is performed. Finally, we analyze an effect of non-linear characteristics of tropospheric delay among reference stations to Network RTK user.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.434-439
• /
• 2019

This paper proposed a control algorithm to compensate the delay time to improve the signal to noise, and the proposed control algorithm estimate the target information to apply the continuous wave radar equation. The proposed control algorithm improves the output signal of each array element bv multiplying the weight of the receive signal to the signal to noise ratio. Radar radiate a signal in spatial and the target information is estimated by the echoed signal from the target. But the signal in the wireless communication environment occurs the delay time due to the multipath which appear human and natural structures. It is difficult to accurately estimate the desired information because of the degradation for the system performance due to the interference signal and the signal distortion. The target information can be improved by compensating the delay signal to apply the weight to the received signal by using the uniform linear array antenna. As a simulation result, we show that the performance of the proposed control algorithm and the non-compensated delay time are compared. The proposed control algorithm proved that the target distance estimation information is improved.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.39-46
• /
• 2009

In this paper, we propose a full digital capacitive sensing touch key reducing the effects due to the variations of resistance and clock frequency. The proposed circuit consists of two capacitive loads to measure and a resistor between the capacitive loads. The method measures the delays of the resistor and two capacitive loads, respectively. The ratio of the two delays is represented as the ratio of the two capacitive loads and is irrelative to the resistance and the clock frequency if quantization error is disregarded. Experimental results show the proposed scheme efficiently reduces the effects due to the variations of clock frequency and resistance. Further more the method has l.04[pF] resolution and can be used as a touch key.