• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.2
• /
• pp.141-155
• /
• 2023

Monitoring technology based on electrical resistivity is widely used for non-destructive data collection and health analysis of underground structures and tunnels. Vulnerable sections such as fault zone generates many problems during construction of the tunnel. These problems cause displacement and stress changes of the ground. Therefore, it is necessary to predict the state of the fault zone section to ensure the mechanical stability of the underground structure. Monitoring the size of joints and the porosity of the fillings is essential for rocks. Previous studies have not considered the variety of fillings in rock joints. In this study, electrical resistivity tests were conducted according to the particle mixing state of the sandy fillings. When the size of fillings is decreased at the constant porosity, the electrical resistivity tends to increase. The results of this study are expected to be useful as basic electrical resistivity data for predicting the ground conditions and evaluation of the ground behavior that is containing sandy fillings in the rock joint for tunnels.

• Composites Research
• /
• v.37 no.3
• /
• pp.219-225
• /
• 2024

It is essential to develop a light-weight, high-performance structure for the deployable reflector antenna, which is the payload of a reconnaissance satellite, considering launch and orbital operation performance. Among them, the composite main reflector is a key component that constitutes a deployable reflector antenna. In particular, the development of a high-performance main reflector is required to acquire high-quality satellite images after agile attitude control maneuvers during satellite missions. To develop main reflector, the initial design of the main reflector was confirmed considering the structural performance according to the laminate stacking design and material properties of the composite main reflector that constitutes the deployable reflector antenna. Based on the initial design, four types of composite main reflectors were manufactured with the variable for manufacturing process. As variables for manufacturing process, the curing process of the composite structure, the application of adhesive film between the carbon fiber composite sheet and the honeycomb core, and the venting path inside the sandwich composite were selected. After manufacture main reflector, weight measurement, non-destructive testing(NDT), surface error measurement, and modal test were performed on the four types of main reflectors produced. By selecting a manufacturing process that does not apply adhesive film and includes venting path, for a composite main reflector with light weight and structural performance, we developed and verified a main reflector that can be applied to the SAR(Synthetic Aperture Rader) satellite.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.166-177
• /
• 2022

The Shiveet Khairkhan is located on Tsengel Som in the middle of Bayan-ulgi Aimag in the Altai region. Various remains have been identified, and it has been found to be an important area of the Eurasian steppe. In this study, the characteristics of textile fibers and dyes excavated from the tombs of the 1st~3rd century Xianbei period in the sites of Shiveet Khairkhan, Mongolia were investigated. As a result of analysis using optical microscopic observation and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) for fiber identification, green and yellow fabrics were identified as silk fabrics. To investigate the properties of the dye, the surface reflectance of the dyed fabric was measured using an fiber optic reflectance spectrophotometer for non-destructive analysis. The green fabric appeared similar to the reflection spectrum of indigo dye. In addition, as a result of component analysis using gas chromatography-mass spectrometry, isatin and indigotine were detected. Isatin and indigotine are characteristic components of indigo dye, and it was found that the green fabric of the tombs of the Xianbei period was dyed using indigo dye. It was difficult to identify the type of dye in the yellow fabric as a result of reflectance spectrum and gas chromatography analysis. Indigo plants are a dye used for blue dyeing from thousands of years ago, and many species are distributed around the world. It was confirmed that the fabric was relatively well preserved and indigo dye was used for the green Jikryeongui (garment with a straight collar) in the ancient tomb of the Xianbei period about 1,800 years ago, even though it was buried for a long time. Scientific investigation of textile cultural heritage is an essential process for conservation treatment, restoration, exhibition, and the creation of a conservation environment. It is expected that related research will be activated in the future and will be helpful in interpreting the living culture at the time, preserving textiles, and a conservation environment.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.4
• /
• pp.33-37
• /
• 2016

The hydration process of Controlled Low Strength Material (CLSM) used for backfill is the primary factor to determine the construction period. The objective of this study is to monitor the hydration process of CLSM using the Time Domain Reflectometry (TDR) and to establish the relationship between dielectric constant and compressive strength. The CLSM specimen is composed of cement, flyash, silt, sand, accelerator, and water. The material characteristics of the CLSM including flow, unit weight, compressive strength are investigated. To measure the dielectric constant of the CLSM during the curing time, TDR probe incorporated with a mold and a reflectometer are used. Experimental results show that the dielectric constant remains constant at early stage, and then decreases as the curing time increases. In addition, the dielectric constant is related to the compressive strength in inverse power function. This paper suggests that the TDR technique may be used as a non-destructive testing method in order to estimate the compressive strength of the CLSM mixture under construction.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.41-41
• /
• 2017

본 연구는 초분광 영상을 이용하여 수박 모종의 수분함량을 비파괴적으로 추정하기 위해 수행되었다. 단계적으로 수분 스트레스를 받은 수박(n=45) 모종을 초분광 영상시스템으로 촬영하여 모종 영역의 반사율을 추출하였고, 매 촬영 후 모종의 생체중과 건물중을 측정하여 수분함량을 계산하였다. 모종의 반사율과 계측된 수분함량을 변수로 하여 Partial Least Square Regression(PLSR) 분석을 이용하여 수분 추정 모델을 구축하였다. 수분 추정모델을 작성한 결과 Calibration(Cal.)의 정확도($R^2$)는 0.66, 정밀도(RMSE 및 RE)는 각각 1.06%, 1.14%로 나타났다. 수박 모종의 수분함량 추정모델의 정밀도는 상당히 높게 나타났으나 정확도는 낮게 나타났다. 정확도를 개선하기 위해 Confidence ellipses의 신뢰구간을 95%로 설정하였을 때 3개의 모종이 타원 밖에 위치하는 것을 발견하였으며 이를 제거 후 재분석을 하였다. 3개의 모종을 제외한 수박 모종의 수분함량 추정모델의 정확도는 0.82, 정밀도는 0.73%, 0.78%로 나타났다. 3개의 모종을 제외함으로서 모델의 정확도 및 정밀도가 상승하여 3개의 모종이 정확도 및 정밀도를 낮추는 원인이라 판단된다. 작물은 가뭄스트레스를 받을수록 반사율이 낮아지지만(Yang et al., 2010) 3개의 모종은 다른 모종의 수분함량에 비해 반사율이 큰 차이를 나타내어 정확도 및 정밀도를 낮춘 것으로 판단된다. 본 연구를 통해 초분광 영상을 이용하여 수박 모종의 수분함량 추정가능성을 시사하였고, 모델의 정확도를 개선하기 위해 샘플 수 및 수분함량의 변이를 증가시키는 것이 필요하다고 판단된다.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.582-587
• /
• 2010

본 연구에서는 녹두 유전자원의 지방산 함량을 신속 대량 검정하는 기술을 개발하여 유전자원 활용 및 육종 촉진에 기여하고자 하였다. 유전자원 평가에 적합한 신속하고 비파괴적인 지방산 함량 평가기술을 개발하기 위해 공시자원 1,125점의 녹두 종자를 종실상태와 분쇄한 분말상태로 근적외선분광분석기(NIR)를 이용하여 1,104~2,494 nm에서의 스펙트럼을 얻고 이들 중 스펙트럼이 중복되지 않는 원산지가 다양한 대표자원 106점을 선발하여 일반적인 방법으로 지방산 함량을 분석하고, 이 값과 NIR 스펙트럼 흡광도값 간의 상관분석을 위한 calibration set로 활용하였다. 그 결과 palmitic acid, stearic acid, oleic acid, linoleic acid, linolenic acid 및 total fatty acid에 대한 NIR 흡광도와의 상관계수 $R^2$이 각각 0.74, 0.18, 0.12, 0.72, 0.48 및 0.78로 나타났고, 이들 중 $R^2$가 높은 검량식을 미지의 시료 10점으로 검증한 결과, palmitic, linoleic 및 total fatty acid에 대한 검증 상관계수 $R^2$이 0.96, 0.74, 0.81로 나타나, 다양한 녹두 유전자원의 지방산함량 신속 대량 예측에 유효하게 활용될 수 있는 것으로 나타났다. 한편, 공시된 녹두 유전자원 115점 중에서 자원번호 IT208075 자원은 저 지방산 자원($14.24\;mg\;g^{-1}$)으로 선발되었고, IT163279 자원은 고 지방산 자원($18.43\;mg\;g^{-1}$)으로 선발되어 향후 녹두작물의 성분육종에 유용할 것으로 생각된다.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.62-77
• /
• 2011

Yi Sunsin's artifacts had been exhibited at Hyeonchungsa in Asan-si, Chungchungnam-do. These artifacts include Janggeom(Long swords), Okno(Jade ornament of Korea traditional hat), Yodae(Waist belt) and Dobae(Peach shaped wine cups) Gudae(Yodae's saucers). These were covered with dust and corroded due to long term display. Condition of these artifacts was examined for a re-opening of Yi Chungmugong Memorial Pavilion on 28 March 2011. Before conservation treatment of the artifacts, scientific analysis was conducted to identify the material of the artifacts. The result showed that the red paint on the hilt of the sword is composed of two layers. Pigments of two layers were found to be hematite and cinnabar mixed with red lead respectively. Mixed layer was assumed to have been applied recently. Also it was found that the blade of the sword was repainted using chrome yellow($PbCrO_4$). Considering the time limit, conservation treatment focused on stabilization of damaged area and prevention of futher risk during display.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.498-505
• /
• 2020

Aggregate occupies about 70-85% of the concrete volume and is an important factor in reducing the drying shrinkage of concrete. However, when constructing high-rise buildings, it acts as a problem due to the high load of natural aggregates. If the load becomes large during the construction of a high-rise building, creep may occur and the ground may be eroded. Material costs increase and there are financial problems. In order to reduce the load on concrete, we are working to reduce the weight of aggregates. However, artificial lightweight aggregates affect the interface between the aggregate and the paste due to its higher absorption rate and lower adhesion strength than natural aggregates, affecting the overall strength of concrete. Therefore, in this study, in order to grasp the interface between natural aggregate and lightweight aggregate by type, we adopted a method of measuring electrical resistance using an EIS measuring device, which is a non-destructive test, and lightweight bone. The change in the state of the interface was tested on the outside of the material through a blast furnace slag coating. As a result of the experiment, it was confirmed that the electric resistance was about 90% lower than that in the air-dried state through the electrolyte immersion, and the electric resistance differs depending on the type of aggregate and the presence or absence of coating. As a result of the experiment, the difference in compressive strength depending on the type of aggregate and the presence or absence of coating was shown, and the difference in impedance value and phase angle for each type of lightweight aggregate was shown.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.2
• /
• pp.113-128
• /
• 2024

Items of road tunnel PISD (Precise Inspection for Safety and Diagnosis) were reviewed and analyzed using newly enhanced MMS (Mobile Mapping System) technology. Possible items with MMS can be visual inspection, survey and non-destructive test, structural analysis, and maintenance plan. The resolution of 3D point cloud decreased when the vehicle speed of MMS is too fast while the calibration error increased when it is too slow. The speed measurement of 50 km/h is determined to be effective in this study. Although image resolution by MMS has a limit to evaluating the width of crack with high precision, it can be used as data to identify the status of facilities in the tunnel and determine whether they meet disaster prevention management code of tunnel. 3D point cloud with MMS can be applicable for matching of cross-section and also possible for the variation of longitudinal survey, which can intuitively check vehicle clearance throughout the road tunnel. Compared with the measurement of current PISD, number of test and location of survey is randomly sampled, the continuous measurement with MMS for environment condition can be effective and meaningful for precise estimation in various analysis.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.67-74
• /
• 2009

The strength of concrete is one of the most important parameters in evaluating the properties of concrete. Compressive strength of concrete has been widely used because of its convenience of experiments and generality. Compressive strength of concrete varies according to materials and curing conditions. Even with the same materials, the strength varies according to the curing conditions. Therefore, if we want to know the strength of concrete from the construction field, we have to put it in exactly the same curing condition with the construction field. But it is impossible to make the exactly same curing conditions in the laboratory. Also damages occur in order to measure the strength of concrete, because the core hat to be made into the pavement. To overcome these limits, many studies of nondestructive method have already been researched. It was already proven that shear wave velocity was very closely related to the compressive strength. In this study, three different curing temperatures with the same mixture paste were used, and compressive strength and shear wave velocity, according to the aging were measured. The relationship between these two parameters was examined. As results, curing temperature affected the compressive strength and the shear wave velocity, but did not affect the relation between them.