• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.344-352
• /
• 2020

Covertness and performance are very important design goals in the underwater communications. To satisfy both of them, we proposed efficient underwater communication model which combined multiband and direct sequence spread spectrum method in order to improve performance and covertness simultaneously. Turbo coding method with 1/3 coding rates is used for channel coding algorithm, and turbo equalization method which iterately exchange probabilistic information between equalizer and decoder is used for receiver side. After optimal threshold value was set in Rake processing, this paper analyzed the performance by varying the number of chips were 8, 16, 32 and the number of bands were from 1 to 4. Through the simulation results, we confirmed that the performance improvement was obtained by increasing the number of bands and chips. 2~3 dB of performance gain was obtained when the number of chips were increased in same number of bands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1818-1826
• /
• 2014

Time-variant sea surface causes a forward scattering and Doppler spreading in received signal on underwater acoustic communication system. This results in time-varying amplitude, frequency and phase variation of the received signal. In such a way the channel coherence bandwidth and fading feature also change with time. Consequently, the system performance is degraded and high-speed coherent digital communication is disrupted. In this paper, quadrature phase shift keying (QPSK) performance is examined in two different sea surface conditions. The impact of sea surface scattering on performance is analyzed on basis of the channel impulse response and temporal coherence using linear frequency modulation (LFM) signal. The impulse response and the temporal coherence of the rough sea surface condition were more unstable and less than that of the calm sea surface condition, respectively. By relating these with time variant envelope, amplitude and phase of received signal, it was found that the bit error rate (BER) of QPSK are closely related to time variation of sea surface state.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.2
• /
• pp.131-136
• /
• 2013

Multi-core processors can improve parallelism of application processes and thus can enhance the system throughput. Researchers have recently revealed that the processor affinity is an important factor to determine network I/O performance due to architectural characteristics of multi-core processors; thus, many researchers are trying to suggest a scheme to decide an optimal processor affinity. Existing schemes to dynamically decide the processor affinity are able to transparently adapt for system changes, such as modifications of application and upgrades of hardware, but these have limited access to characteristics of application behavior and run-time information that can be collected heuristically. Thus, these can provide only sub-optimal processor affinity. In this paper, we define meaningful system variables for determining optimal processor affinity and suggest a tool to gather such information. We show that the implemented tool can overcome limitations of existing schemes and can improve network bandwidth.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.392-396
• /
• 2005

A new structure of tunable wavelength converter based on XCM in SOA was tried and analyzed. This converter used single SOA and had very simple structure. In this paper, results were experimentally obtained and demonstrated. Pump signal was generated with NRZ $(PRBS\;2^{31}-1)$ and data rate 2.5 Gbps. WDM multi conveted signals showed more than 8.3 dB extinction ratio. For BER performance, all these converted signals had within 5.0 dB power penalty compared with the pump signal. With these results, we showed that this converter was suitable for 2.5 Gbps WDM multi-channel wavelength converting.

• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.9-14
• /
• 2003

A GUI (graphical user interface) has been a dominant platform for HCI (human computer interaction). A GUI - based interaction has made computers simpler and easier to use. The GUI - based interaction, however, does not easily support the range of interaction necessary to meet users' needs that are natural. intuitive, and adaptive. In this paper, the modified BMA (block matching algorithm) is proposed to track a hand in a sequence of an image and to recognize it in each video frame in order to replace a mouse with a pointing device for a virtual reality. The HCI system with 30 frames per second is realized in this paper. The modified BMA is proposed to estimate a position of the hand and segmentation with an orientation of motion and a color distribution of the hand region for real - time processing. The experimental result shows that the modified BMA with the YCbCr (luminance Y, component blue, component red) color coordinate guarantees the real - time processing and the recognition rate. The hand tracking by the modified BMA can be applied to a virtual reclity or a game or an HCI system for the disable.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.479-486
• /
• 2010

In this paper, we propose a novel low-complexity Alamouti coded orthogonal frequency division multiplexing (OFDM) scheme for asynchronous cooperative communications. Exploiting the combination of OFDM symbols at the source node and simple operations including sign change and complex product at the relay node, the proposed scheme can achieve cooperative diversity gain without use of time-reversion and shifting operations that the conventional scheme proposed by Li and Xia needs. In addition, by using the cyclic prefix (CP) removal and insertion operations at the relay node, the proposed scheme does not suffer from a considerable degradation of bit-error-rate (BER) performance even though perfect timing synchronization is not achieved at the relay node. From the simulation results, it is demonstrated that the BER performance of the proposed scheme is much superior to that of the conventional scheme in the presence of timing synchronization error at the relay node. It is also shown that the proposed scheme obtains two times higher diversity gain compared with the conventional scheme at the cost of half reduction in transmission efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1734-1741
• /
• 2007

In this paper, the Hybrid SC/MRC-2/4 method in which bit synchronization and phase synchronization were not required was applied to the orthogonal MC DS-CDMA system in which each normalized subcarrier interval and processing gain had the same value, respectively, and the direct sequence spread code of each subcarrier was orthogonal. In the broadband wireless system in which multi-carrier transmission was used, a Doppler frequency shift occurred, which was caused by the difference between the highest subcarrier frequency md the lowest subcarrier frequency. In order to complement phase error caused by the shift, the orthogonal MC DS-CDMA system was analyzed so that the receiving signal could be perfectly synchronized by adjusting the PLL gain suitable for the entire system. As a result of simulations, as the PLL gain was increased, the change in the intervals was close to the case of perfect synchronization however, it became less when the PLL gain reached more than a certain value. Therefore, by selecting a proper PLL gain suitable for the system the orthogonal MC DS-CDMA can be designed in which the Hybrid SC/MRC method is applied.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.580-586
• /
• 2019

In this paper, we propose a biomimetic communication method using a dolphin whistle to covertly transmit the communication signal. A conventional CSS (Chirp Spread Spectrum) modulation technique divides dolphin whistle into several slots and modulates with up and down chirp signals. That causes the time-frequency characteristic difference between the original dolphin whistle and the camouflage performance is degraded. In this paper, we propose a delay based modulation scheme to eliminate distortions. The simulation results show that the bit error rate of the proposed method is better performance than that of the conventional CSS modulation method by about 3.5 dB to 8 dB. And the camouflage performance that evaluated through the cross correlation in the time-frequency domain is also better than that of the CSS modulation method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.219-226
• /
• 2021

LED-to-LED VLC is a technology that uses LEDs as both a transmitter and a receiver unlike the typical VLCs. In this paper, we experimentally demonstrate a micro LED-to-LED VLC using Micro LED. We tested all the possible VLC cases using red, yellow, green, blue, and white color LED as both a transmitter and a receiver, and measured rise time and SNR. Then we calculated channel capacity depending on the LED color sets. Our experimental results show that the best channel capacity is 125 kbps when the transmitter micro LED was blue and the receiver LED was green. We also measured BERs of VLCs using OFDM signal, and we showed a successful micro LED-to-LED VLC upto 250 kbps.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.304-313
• /
• 2021

This paper presents the results of a sea trial for long range underwater acoustic communication conducted in the East Sea in November 2020. Signals were collected through a moving transmitter and 16 vertically arranged receivers, and the range between the transmitter and receiver was about 20 km. The signal in the experiment is a conventional Direct Sequence Spread Spectrum (DSSS) method and a superimposed DSSS method that increases data rate by superimposing of multiple circulated Pseudo Noise (PN) sequences for each symbol. The results show that the uncoded bit error rate averaged over 16 channels to which the channel coding technique was not applied was 0.0005 for the conventional direct sequence spreading method, and was 0.00124 for the superimposed direct sequence spreading method.