• The Journal of the Korea Contents Association
• /
• v.6 no.7
• /
• pp.69-78
• /
• 2006

In this paper, we presents the efficiency and a transmission quality of the system which is composed of the optical elements from physical layer of the active optical ring network. For a simulation it will use the Transmissionmaker WDM and it will be able to observation a optical transmission quality of the optical transmission system. The active optical network is composed of two rings(main ring and sub-ring). It measures the BER(Bit Error Rate) quality which it follows node number from the sub ring and physical distance of the node. Performance analysis from the physical layer becomes the standard of the plan for the efficiency optimization of the active optical ring network. Consequently it will be able to compose the efficient optical transmission system which reflects the physical distance, a traffic demand quantity of each node and a number of users from actual network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.539-548
• /
• 2011

We propose an efficient cooperative ARQ (Automatic Repeat reQuest) scheme for single-hop and multi-hop underwater acoustic communications, in which cooperative nodes are used to provide more reliable alternative paths for a specific source-to-destination connection. This alternative path has higher channel quality than that of the direct source-destination path. In addition, during a packet-relay through multiple hops, the typical acknowledgement (ACK) signal is replaced with overhearing data packet returned back from the next hop. The usage of overhearing as an ACK improves the system performance. In this paper, we evaluate the proposed scheme by comparing it with a conventional S&W ARQ in terms of throughput efficiency. Computer simulation results show that the proposed cooperative retransmission scheme can significantly improve the throughput by increasing the probability of successful retransmission.

• The Korean Journal of Mycology
• /
• v.30 no.1
• /
• pp.18-22
• /
• 2002

This study was carried to investigate efficient pot diameter and substrate weight in pot cultivation of Pleurotus ostreatus. Cultivating substrate was pine sawdust+beet pulp+cotten seed flour (50 : 30 : 20, v/v). Ranges of pot diameter and substrate weight were $10{\sim}20\;cm\;and\;600{\sim}2,500\;g/pot$, respectively. Smaller pot diameter resulted in longer pot length according to increasing substrate weight, so mycelial growth period and total cultivation period was retarded. Wider pot diameter resulted in a little lower biological efficiency in the same substrate weight. Heavier substrate weight was brought higher yield but lower biological efficiency. Average yield according to pot diameter was decreased at wider than 14 cm during second flush. And average biological efficiency according to substrate weight was lower than 100% at heavier than 1,200 g/pot during second flush. So suitable pot diameter and substrate weight in pot cultivation of Pleurotus ostreatus were estimated $10{\sim}14\;cm\;and\;800{\sim}1,200\;g$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.2004-2010
• /
• 1999

This paper presents the blind multiuser detector using the constant modulus algorithm(CMA) to solve the near-far problem in DS-CDMA systems. The convergence property of the detector is compared with the conventional MOE(minimum output energy) detector by means of SIR(signal-to-interference ratio). The MOE detector needs both the spreading code of the users and the timing information, while proposed methods needs only information about the spreading code of users Simulation results show that the CMA-based detector is superior to the conventional blind MOE multiuser detector. For this, the BER performance was tested using different values of SNR and near-far ratio. The SIR is also investigated for different number of users in AWGN and Rayleigh fading channels. We have observed that the proposed blind multiuser detector performs better than conventional MOE multiuser detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1393-1399
• /
• 1999

In this paper, a VLSI design of the convolutional codec chip of code rate r=l/3, and constraint length K=9 is presented, which is able to correct errors of the received data when transmitted data is corrupted in channels. The circuit design mainly aimed for simple implementation. In the decoder, Viterbi algorithm with 3-bit soft-decision is employed. For information sequence updating and storage, the register exchange method is employed, where the register length is 5$\times$K(45 stages). The codec chip is designed using VHDL language and Design Analyzer and VHDL Simulator of Synopsys are used for simulation and synthesis. The chip is composed of ENCODER block, ALIGN block, BMC block, ACS block, SEL_MIN block and REG_EXCH block. The operation of the codec chip is verified though the logic simulations, where several error conditions are assumed. As a result of the timing simulation after synthesis, the decoding speed of 325.5Kbps is achieved, and 6,894 gates is used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1061-1068
• /
• 2019

Cooperative networks transmit signals form the source node to the destination node via several relay node where the combining and demodulation of relay aided signals provide the benefit of performance enhancement and data rate increment. In general, a repetitive manner transmission scheme in which the received signal from the source node is amplified/re-generated and forward to the destination node is widely used. In this paper, we analyzed the performance of cooperative networks using the mixed transmission scheme. The conventional modulation scheme is used in the source-relay links, and space-time code is applied in the relay-destination links. To reduce the complexity of the overall system, we adopt differential modulation which bypasses channel state information. We analyze bit error rate (BER) of the proposed system by considering the number of relay nodes, and the performances depending on the strength of transmission signal in the source-relays and rely-destination links are compared. In addition, we also discuss the system performance with the signal strength and the number of relay nodes simultaneously.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.614-622
• /
• 2015

Binary MQ arithmetic coding is widely used recently as a basic entropy coder in multimedia coding system. MQ coder esteems high in compression efficiency to be used in JBIG2 and JPEG2000. The importance of arithmetic coding is increasing after it is adopted as an unique entropy coder in HEVC standard. In the binary MQ coder, arithmetic approximation without multiplication is used in the process of recursive subdivision of range interval. Because of the MPS/LPS exchange activity happened in MQ coder, output byte tends to increase. This paper proposes an enhanced binary MQ arithmetic coder to make use of a lookup table for AQe using quantization skill in order to reduce the deficiency. Experimental results show that about 4% improvement of compression in case of JBIG2 for bi-level image compression standard. And also, about 1% improvement of compression ratio is obtained in case of lossless JPEG2000 coding. For the lossy JPEG2000 coding, about 1% improvement of PSNR at the same compression ratio. Additionally, computational complexity is not increasing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.30-36
• /
• 2016

In this paper, an Rx-ordering aided sphere decoding algorithm for generalized spatial modulation (GSM) systems is proposed. In the proposed sphere decoding algorithm, to efficiently reduce the search region, the received signals are optimally ordered, which results in the reduction of computational complexity. To evaluate the performance and the computational complexity of the proposed Rx-ordered sphere decoding algorithm, the simulations are performed. In the simulation results, it is observed that in GSM systems, the proposed decoding algorithm achieves the same error performance with the conventional SD, whereas it efficiently decreases the computational complexity for symbol detection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2041-2047
• /
• 2013

In this paper, we proposed high speed LDPC decoding algorithm based on DVB-S2 standard. For implementing the high speed LDPC decoder, HSS algorithm which reduce the iteration numbers without performance degradation is applied. In HSS algorithm, check node update units are update at the same time of bit node update. HSS can be accelerated to the decoding speed because it does not need to separate calculation of the bit nodes, However, check node calculation blocks need many clocks because of just one memory is used. Therefore, this paper proposed dc-split memory structure in order to reduced the delay and high speed decoder is possible. Finally, this paper presented maximum split memory and throughput for various coding rates in DVB-S2 standard.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.268-273
• /
• 2015

Recently many countries are researching actively underwater sensor networks for securing ocean resources and changes of ocean environment in all over the world. Current the commercial modem are not suitable because it has characteristics of long distance, higher price, larger power consumption with the special object mainly. In this paper, a low power and compact underwater communication modem which is suitable for underwater sensor networks is implemented. It is comprised by using a simple analog circuit for non-coherent BFSK modulation method, ultra low power MCU and orthogonal codes with a less operation and a simple implementation. It was experimented an underwater communication using our modem in a water tank and open sea farms. It communicates fewer than $10^{-4}$ bit error rate.