• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1219-1230
• /
• 2008

Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.99-125
• /
• 2012

Shojo manga, one of Japan's comic genres, is well-known around the world. There is an equivalent manga genre in Korea and it is called Sunjeong Manhwa. What distinguishes shojo manga from other comic genres is its unique visual representation of the inner world of comic characters. In this study, shojo manga depicted in various shojo magazines in the early 1960s are analyzed. The magazines reviewed include Shojo, Shojo Club and Shojo Book. Among the visual representations, flower expression, panel composition and title page design are selected for analysis. Based on the results of the analysis, the basic elements of shojo manga are portrayed well in manga published in the early 1960s, during which several female cartoonists actively led the creation of the said genre. These findings confirm that the representations adopted in shojo manga for the purpose of expressing the inner world and psychological aspects of the main characters were already evident in the early 1960s. According to earlier studies, shojo manga reached its golden age in the 1970s, when the genre's format and representation method were developed to its full extent. Therefore, studies investigating shojo manga often focused on this golden era, during which a variety of comics emerged and stories and presentation skills further improved. An increasing number of readers began reading shojo manga. Popular cartoonists also emerged, further accelerating the genre's burgeoning popularity. However, there has been no investigation on the unique representations found in shojo manga. This means that the shojo manga published between the late 1950s and the early 1960s were underestimated compared with those published in the 1970s. The aim of this study, therefore, is to reassess the comic works and cartoonists that led to the establishment of shojo manga by analyzing visual representations of shojo manga published from 1958 to 1963. This study proposes new ideas on when the unique representations of shojo manga first emerged and how those representations were described.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.59-68
• /
• 2016

The application of the Life Cycle Assessment (LCA) methodology to assess the environmental impact of rapeseed cultivation in winter fallow after harvesting rice was investigated and compared with barley cultivation in crop rotation system. Data for input materials were collected and analyzed by 1 ton rapeseed and barley as functional unit. For the Life Cycle Impact Assessment (LCIA) the Eco-indicator 95 method has been chosen because this is well documented and regularly applied impact method. From the comparison of impact categories such as greenhouse effect, ozone depletion, acidification, heavy metals, carcinogens, summer smog, and energy resources for 1 ton of final product, emission potential from rapeseed was higher than that from barley. The range from 65 to 96% of these potential came from chemical fertilizer. On the other hand, eutrophication potential from barley was higher than that from rapeseed, mainly came from utilizing the chemical fertilizer. During the cultivation of barley and rape, environmental burden by heavy metals was evaluated by 0.5 Pt, larger than points from other impact categories. The sum of points from all impact categories in barley and rapeseed was calculated to be 0.78 Pt and 0.82 Pt, respectively. From the sensitivity analysis for barley and rapeseed, scenario 1 (crop responses to fertilization level) showed the environmental burden was continuously increased with the amount of fertilization in barley cultivation, while it was not increased only at the optimum crop responses to fertilization in rapeseed (R3). With these results, rapeseed cultivation in winter fallow paddy contributed to the amounts of environmental burden much more than barley cultivation. It is, however, highly determined that environmental weighted point resulted from evaluating both cultivation was not significantly different.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.2
• /
• pp.168-179
• /
• 2004

Background : The statistical analysis is an essential procedure ensuring that the results of researches are based on evidences rather than opinion. The purpose of this study is to evaluate which statistical techniques are used and whether these statistical methods are used appropriately or not in the journal of Tuberculosis and Respiratory Diseases. Materials and Methods : We reviewed 185 articles reported in the journal of Tuberculosis and Respiratory Diseases in 1999. We evaluated the validity of used statistical methods based upon the checklist that was developed on the basis of the guideline for statistical reporting in articles for medical journals by International Committee of Medical Journal Editors. Results : Among 185 articles, original articles and case reports were 110 (59.5%) and 61 (33.0%) respectively. In 112 articles excluding case reports and reviews, statistical techniques were used in 107 articles (95.5%). In 94 articles (83.9%) descriptive and inferential methods were used, while in 13 (11.6%) articles only descriptive methods were used. With the types of inferential statistical techniques, comparison of means was most commonly used (64/94, 68.1%), followed by contingency table (43/94, 45.7%) and correlation or regression (18/94, 19.1%). Among the articles in which descriptive methods were used, 83.2% (89/107) showed inappropriate central tendency and dispersion. In the articles in which inferential methods were used, improper methods were applied in 88.8% (79/89) and the most frequent misuse of statistical methods was inappropriate use of parametric methods (35/89, 39.3%). Only 14 articles (13.1%) were satisfactory in utilization of statistical methodology. Conclusion : Most of the statistical errors found in the journal were misuses of statistical methods related to basic statistics. This study suggests that researchers should be more careful when they describe and apply statistical methods and more extensive statistical refereeing system would be needed.

• Journal of The Korean Association For Science Education
• /
• v.18 no.1
• /
• pp.93-108
• /
• 1998

This study investigated science textbooks used from 1906 to 1915 in Korea, which is often neglected in previous researches. By doing so, more practical and specific understanding of the science education during that period can be made. It was based on the historical achieves "School Textbook List"(Vol. $4{\sim}9$) which was published by the Ministry of Education and the Government General of Chosen and other sources. The results and conclusions of the research are as follow; (1) The science textbooks which have been used from 1906 to 1915 in Korea can be categorized into three different tapes of books, either written in Chinese, or in Japanese, or in Korean. The names of science textbooks were Nature Study, Physics, Chemistry, Natural History, Hygienics, Physiology, Zoology, Botany, Astronomy, Physiography, Mineralogy, Geology. These names were much broader than those in curriculum settled by the government and rather correspond to the names of science textbooks in curriculum which settled by private schools. Therefore those science textbooks had been mainly used in private schools. Moreover almost all of the science textbooks published in Korea have started to appear after 1906. Since then many schools were newly opened and the number of students increased. It is possible to say that substantial science education in Korea established after 1906. (2) Science textbooks from 1906 to 1915 printed in Korea were controlled in their use by the Ministry of Education and the Government General of Chosen. They were the main means of government regulations, supported by Private School Ordinance, Regulations for Official Examination of textbooks in 1908 and Law of Publication in 1909. According to the result of official examination, as the time went by under the Japanese ruling of Korea, the increasing number of science textbooks were getting banned. While the science textbooks had enjoyed more freedom than the other textbooks from the control by inspection of the Government General of Chosen, the situation has been significantly changed as Japan started to intensity the control of all kinds of textbooks in Korea. Although there were a lot of copied science textbooks, 62 science textbooks printed in Korea, 72 Japanese science textbooks were used in Korea, and 40 Korean were to be engaged in science education compiling and copying science textbooks. There developments in science textbooks alone suggest that there were enormous amount of potentials in Korean science education at that time. However, all of these effects and progresses were destroyed when the sovereign authority of Korea was lost to Japan in 1910.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.301-307
• /
• 2015

High quality transplants are critical for success in crop production. Increasing numbers of growers purchase their transplants from specialized transplant producers instead of growing their own transplants. A drawback of purchasing transplants is the risk of deterioration to transplants during transportation from transplant producers to the growers. This study evaluates the influence of temperature on the quality of grafted tomatoes transplants (Solanum lycopersicum cv. Super Doterang), in order to propose optimum temperature condition for the transportation of grafted tomato transplants. Grafted tomato transplants with visible flower trusses were exposed to different air temperature ($10^{\circ}C$, $25^{\circ}C$, or $40^{\circ}C$) for 2, 4, or 6 hours. After treatment, the NDVI (Normalized Difference Vegetation Index) values of tomato transplants treated at 25 and $40^{\circ}C$ were lower than that at $10^{\circ}C$. The root fresh weight was lowest at $40^{\circ}C$. After transplanting, the transplants that were exposed to the air temperature of $40^{\circ}C$ exhibited chlorosis and blight on lower leaves. The degree of damage on leaves was severer as the high temperature exposure time was longer. The temperature conditions during the transportation also influenced the growth, flowering and fruit set of tomatoes after transplanting. The fruit number and weight of first truss was lowest at $40^{\circ}C$ for 6 hours. Accordingly, it is recommended that the temperature during the transportation should be controlled and kept at the range from 10 to $25^{\circ}C$ even though the period is short (within as six hours) in order to maintain the quality of transplants.

• Korean journal of applied entomology
• /
• v.48 no.4
• /
• pp.527-533
• /
• 2009

This study was performed to investigate the escape of pine wood nematode (PWN), Bursaphelenchus xylophilus, from two vector species (Monochamus alternatus and M. saltuarius) through oviposition and feeding behavior. First, we checked number of PWNs escaped from M. alternatus emerged from three different cases of pine logs. In case A, healthy pine trees were cut into logs and left in pine forest infected with PWN. In case B, healthy pine trees were cut into logs, left in large screen cage, and let them oviposited by M. alternatus emerged from pine trees infested with PWN. In case C, pine trees which were harboring M. alternatus were cut into logs, and PWN was inoculated artificially. The M. alternatus adults emerged from the above three cases of pine logs were checked in the next year to know how many PWN they were harboring in their bodies. The percentages of M. alternatus harboring PWN (18.3 and 15.6%, respectively) and number of nematodes per vector ($5,713.1{\pm}9,248.3$ and $2,034.1{\pm}4,746.8$ PWNs, respectively) in case A and B logs are similar to each other. However, the percentage and the number in case C (38.3% and $20,083.1{\pm}32,188.3$ PWNs) were higher than those of case A and B. Among 52 M. alternatus adults harboring PWN from all the three cases, 20 adults (38.5%) were harboring more than 5,000 PWNs per beetle. And these 20 adults were harboring 97.9% of the total PWNs in 52 adults. Second, we checked the daily escape of PWNs from M. alternatus and M. saltuarius collected at pine forest infested with PWN. The PWN escaped from their vector body for $34.9{\pm}12.4$ days for M. alternatus, and for $23.9{\pm}16.2$ days for M. saltuarius, reaching at peak escape during the 2nd week of emergence of the two vector species. A 44.5 and 47.2% to the total PWNs escaped from vector body within 2 weeks of vector emergence for M. alternatus and M. saltuarius, respectively. The number of PWNs escaped from each vector was $3,570.6{\pm}5,189.2$ and $1,556.2{\pm}1,710.3$ for M. alternatus and M. saltuarius, respectively.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.3
• /
• pp.43-52
• /
• 1984

This paper is concerned with the strain characteristics of the time effect on the remoulded saturated day sampled from the downstream of the Yeongsan river, and the constitutive equation that can generally explain time-dependent behaviors of norma1ly consolidated clay. This paper examines whether or not the afore-said constitutive equation can be applied to the remoulded Mooan-clay. Throughout this study, the conclusions obtained are as follows. 1. Throughout the isotropic consolidation test for 7 days and the isotropic relaxation test, the existence of the static and dynamic yielding surfaces is confirmed respectively. 2. The characteristics of time effect of the deformation, namely, the existence of a unique stress-strain-time relation, is conformed from the experimental result on the Mooan-clay. 3. The prodictions of the stress path and the strain on the Cam-clay theory is not consistent with those observed during the experiments. 4. Constitutive equation(2-3-12) obtained by applying Cam-clay theory to Perzyna's elastic-viscoplasticity theory can explain the behavior of pore water pressure during isotropic stress relaxation, concerned with time dependency under undrained condition. The equation can also explain the results of the undrained triaxial compression test for the clay with different strain rate under the same or different consolidation history. 5. This constitutive equation has eight material parameters which can be determined from triaxial compression tests.