• The Journal of Engineering Geology
• /
• v.5 no.3
• /
• pp.259-276
• /
• 1995

Electrical soundings and profilings were conducted for mapping the leachate in the region of Nanji - Do Landfill site. The results of electrical surveys conducted in the landfill area show that the basal leachate is formed at the height about 30 m above the mean sea level and that there is abundant floating leachate over the basal leachate. The surveys conducted around the landfill reveal that the groundwater which may be contaminated by the leachate from the landfill flows to the Han River. The top of the basement rock in this area has been severely affected by polluted groundwater. The layer which is thoroughly saturated with leachate in this region has the very low resistivity value below 10 ohm - m and this low resistivity value indicates that the groundwater and geology are severely contaminated by the leachate and wastes of the landfill.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.116.2-116.2
• /
• 2017

DLC (Diamond like carbon) 박막을 전극 재료로 활용하기 위해서는 높은 전기 저항과 금속성 기판에 대한 낮은 접착력을 극복해야 한다. 본 연구에서는 PECVD에 의해 합성 된 DLC/Ti 전극의 아크 중간층, 질소 도핑, 증착 및 열처리 온도가 접착 강도와 전기적 및 전기 화학적 특성에 주는 영향을 체계적으로 조사 하였다. 그 결과, arc ion plating (AIP) 법에 의해 증착 된 Ti/TiC 중간층의 도입은 스크래치 테스트와 전기화학적 싸이클 테스트에서 향상된 접착 강도 및 수명을 가져온다는 것을 확인 하였다. 그리고 arc 중간층에서의 arc droplet은 DLC 박막의 표면적을 넓혀 전기 화학적 활성도를 높이는 긍정적인 역할을 하였다. 소량의 질소 도핑은 DLC 막의 비저항을 크게 낮춰주었고, 전기화학적 활성도를 증가시켰다. 증착 온도가 높을수록 DLC 막의 sp2/sp3 비율이 증가하였고, 이에 따라 비저항은 감소하였으며 전기 화학적 활성도는 증가하였다. 반면, 가장 높은 전기화학적 전위창은 $300^{\circ}C$ 에서 얻어졌으며 더 높은 온도에서 감소하였다. 열처리 온도를 높일수록 비저항의 감소 및 전기 화학적 활성도가 증가한 반면, 전기화학적 전위창은 지속적으로 감소하였고, 높은 열처리 온도에서는 DLC 전극의 수명이 줄어드는 것을 확인 하였다.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.39-46
• /
• 2009

A small loop-loop multi-frequency electromagnetic(EM) induction method is a useful technique to map a resistivity distribution efficiently and non-destructively. However, for quantitative interpretation and depth sounding, the quality of measured data is crucial. In this paper, we propose a bias correction of measured data by using background noise measurements to obtain reliable data, and propose an evaluation technique of apparent that can provide a resistivity image easily. We have performed small loop-loop EM measurements to detect water saturation in a man-made test site. The application of our proposed techniques to the measured data was successful.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.39-46
• /
• 2009

In this paper, we propose a full digital capacitive sensing touch key reducing the effects due to the variations of resistance and clock frequency. The proposed circuit consists of two capacitive loads to measure and a resistor between the capacitive loads. The method measures the delays of the resistor and two capacitive loads, respectively. The ratio of the two delays is represented as the ratio of the two capacitive loads and is irrelative to the resistance and the clock frequency if quantization error is disregarded. Experimental results show the proposed scheme efficiently reduces the effects due to the variations of clock frequency and resistance. Further more the method has l.04[pF] resolution and can be used as a touch key.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.405-406
• /
• 2003

분진여과시 형성되는 분진 케이크는 궁극적인 여과 성능을 좌우하며, 필터의 구조, 분진 입자의 형태나 크기, 분진농도, 여과속도 등에 의해 영향을 받는다 특히 필터의 표면 구조나 기공 크기는 여과 초기 단계의 케이크 층의 구조를 결정하며, 연속적인 여과시 초기 케이크 층은 다음에 쌓이는 케이크 형성과 비저항에 영향을 주므로 필터 medium 구조 또한 분진여과 과정에서 중요한 영향 요인이 된다. 본 연구에서는 필터 medium의 구조가 서로 다른 고온가스정화용 복합 세라믹 필터, metal fiber mat, 스테인레스 필터를 이용하여 분진농도와 여과속도를 변수로 하여 분진 여과 실험을 함으로써 각각의 필터에 대한 케이크 비저항과 기공율을 실험과 이론식으로부터 추정하였다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.639-642
• /
• 2001

전형적인 비저항-온도 특성을 갖는 BaTiO$_3$계 PTC 세라믹을 일반적인 세라믹 공정을 이용하여 제조하였고, 결정립계면에 형성된 전위장벽의 높이를 구하였다. ZnO 바리스터의 전위장벽을 구하기 위해 이용되었던 커패시턴스-전압 관계식과는 다른 새로운 관계식을 제안하였고, 기존의 비저항-온도 관계식을 다소 변경한 관계식을 이용하여 전위장벽을 구하였다. 두 관계식으로부터 구한 전위장벽의 높이는 매우 유사한 값을 보이고 있으며 타 연구자들에 의해 보고된 값과도 잘 일치하고 있다. 비저항-온도 관계식과 커패시턴스-전압 관계식을 이용하여 130-18$0^{\circ}C$ 구간에서 구한 전위장벽의 크기는 각각 0.41-0.76V와 0.36-0.80V이었다.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.804-806
• /
• 2007

C-axis oriented zinc oxide thin films were deposited on Si(100) substrate by rf magnetron sputtering. The effects of deposition parameters on the crystallinity and electrical properties of ZnO films were investigated. As-deposited ZnO films showed the strong c-axis growth andexcellent crystallinity under the deposition conditions as follows ; substrate temperaturec : $200^{\circ}C$, rf power : 150W, gas ratio : $O_2/Ar=50/50$, chamber pressure : 10mTorr. The resistivity of ZnO films was significantly affected by deposition parameters. With increasing percentage of oxygen, and decreasing substrate temperature, the resistivity of ZnO films increased.

• Economic and Environmental Geology
• /
• v.21 no.1
• /
• pp.107-113
• /
• 1988

We present a precedure for interpreting dipole-dipole apparent resistivity data. The procedure is constructed by combining a forward two-dimensional finite element modeling and an inverse technique with Householder's transformation. In the interpretation, subsurface structure is divided into some blocks with constant resistivities. Our inversion technique is tested on synthetic and field data. We found that geologic constraint is required for successful interpretation.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.219-224
• /
• 1986

Spectral induced polarization (IP) responses for 20-degree dipping body are obtained by both numerical and scale models. The IP responses for the dipping body vary not only with current frequencies but also with resistivity ratios between the body and the surrounding medium. If the ion concentration related to polarizable reaction is constant, the resistivity of polarizable body depends only on the current frequency. This implies that the IP responses to the resistivity ratio are qualitatively equivalent to those to the current frequency. The numerical results with wide-range resistivity ratios, therefore, can be used as standard curves for the interpretation of spectral IP data.

• Economic and Environmental Geology
• /
• v.18 no.3
• /
• pp.217-224
• /
• 1985

A Householder's transformation is applied to the resistivity inversion problem. The conventional resistivity inversion method is sometimes numerically unstable in interpreting a resistivity sounding data because it usually solves the normal equation derived from an observation equation. The resistivity inversion method using Householder's transformation solves the observation equation directly, so that it is numerically more stable than the conventional method. A theoretical, ill-conditioned Schlumberger sounding data was chosen to test the inversion scheme with Householder's transformation.