• Journal of Korean Society for Quality Management
• /
• v.22 no.4
• /
• pp.1-12
• /
• 1994

For quality improvement, Taguchi emphasizes the reduction of variation of the quality characteristic. Taguchi has used the signal to noise ratios for achieving minimum dispersion of the quality characteristic with its location adjusted to some desired target value. At each setting of design factors, the variance of the quality characteristic could be affected by the mean. In most cases, as the mean get larger, the variance tends to increase, The Taguchi's SN ratio corresponds to the case that the variance is proportional to the square of the mean. But the variance can increase faster or slower than the square of the mean. We propose to infer a linking relationship of the variance and mean through simple data analysis technique, and then use a reasonable SN ratio.

• Journal of Sensor Science and Technology
• /
• v.4 no.3
• /
• pp.15-21
• /
• 1995

In this paper, $TiO_{2}-V_{2}O_{5}$ humidity sensors are fabricated by Sol-Gel method. For the establishment of optimum processing condition which is good humidity sensitive characteristics for specimens, their microstructures and crystalline-structures are analysed. Grain size increases with substitution rate of $V^{5+}$ on $Ti^{4+}$ site. From the analysis of XRD, $V^{5+}$ peak can't confirm with $V_{2}O_{5}$ rate. Their humidity sensitive characteristics is good at 1mol% of $V_{2}O_{5}$ rate and heat-treated at $700^{\circ}C$. The capacitance of specimens decreases with frequency.

• Computational Structural Engineering
• /
• v.2 no.3
• /
• pp.69-75
• /
• 1989

The primary purpose of using bracings is to improve the lateral rigidity of main structural system, i.e., columns and beams, by reinforciing them with much smaller members. In conventional design methods brackings are considered as tension-only members, since difficulties arise in the analysis when the P-.DELTA. effects and post-buckling behaviour of the bracing members are taken into account. This is particulary true fox X-bracings. Recently, however, both analytical and experimental studies have been conducted to investigate the more precise and real behaviour of bracing members, especially for the nonlinear and plastic behaviour under cyclic loads. In this study, an analytical model is proposed to investigate the nonlinear behavior of steel bracing members subjected to cyclic loads. Results of the analysis were compared with previous experimental results, and good agreements were obtained between these results.

• Composites Research
• /
• v.13 no.4
• /
• pp.11-18
• /
• 2000

This study is mainly concerned with friction and wear properties for the piston ring of non-lubricating air compressor which made of PTFE-polyimide composites. At the PTFE and polyimide alone mixture specimens, PTFE80%-polyimide20%, which shows the lowest mean friction coefficient and specific wear rate at 0.94m/s sliding speed. In case of the specific wear rate, copper30% specimen shows the lowest value of 2.537-5(mm3/Nm) in all specimens. It considered that the friction coefficient is affected by generating speed and quantity of wear film. In case specific wear rate, it is attributed to the fact that the surface hardness of wear film is proportioned to specific wear rate.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.135-141
• /
• 1990

Optical nonlinearity of laser heated Si with thickness of 160$\mu$m is investigated by pump-probe method. Si is heated by pdsed Nd:YAG laser of $TEM_{00}$-mode with pulse duration of 180$\mu$sec. Temperature change is monitored by observing transmittance change of probe light whose wavelength lies near band gap of Si. It is found that temperature rise is linearly proportional to incident laser intensity and the maximum temperat~re increment is measured to be $16^{\circ}C$ for the maximum incident intensity of 25KW/$\textrm{cm}^2$. From these results, the third order nonlinear susceptibility .d3) at the wavelength of 1.06$\mu$mis estimated to be $6.6\times10^{-5}$esu due to laser heating.

• The Southeast Asian review
• /
• v.21 no.2
• /
• pp.125-153
• /
• 2011

본 논문에서는 아시아 경제위기(1997-2000)와 글로벌 경제위기(2007-2010)의 양대 경제위기 이후 진행된 동남아시아 지역의 달러화 현상에 대해 후발국이면서 체제전환국 성격이 강한 캄보디아, 라오스, 베트남을 중심으로 분석하였다. 이를 위해 로하스-수아레즈(Rojas-Suarez 1992) 모형을 활용하여 양대 경제위기의 위 3개국의 달러화 현상에 대한 영향을 비교 분석하였다. 동 모델에 의하면 경제위기는 자국화폐에 대한 신뢰를 떨어뜨려 자국 화폐가치에 대한 예상평가절하율(예상환율상승률)이 크면 클수록 자국화폐 대비 달러화에 대한 수요는 증가될 것으로 예상된다. 분석 결과 아시아 경제위기의 경우 모델의 예상대로 자국 화폐의 예상평가절하 시 달러화의 수요를 나타내는 탄력성 계수가 통계적으로 유의하였다. 국가별로는 캄보디아, 라오스, 베트남의 순서로 탄력성이 크게 나타났으며 이는 각 국의 달러화 수준과 비례하는 결과이다. 이에 비해 글로벌 경제위기의 경우에는 캄보디아를 제외하면 탄력성 계수가 유의하지 않은 것으로 나타났다. 또한 캄보디아의 경우에도 탄력성 계수가 아시아 경제위기의 경우에 비해 감소된 것으로 나타났다. 이러한 결과는 달러화 현상에 있어서 아시아 경제위기에 비해 글로벌 경제위기의 영향이 상대적으로 작다는 것을 의미한다. 이는 동남아시아에 대한 글로벌 경제위기의 부정적 영향이 상대적으로 작았다는 기존의 연구들의 주장과 일치한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.6
• /
• pp.20-28
• /
• 2021

High enthalpy test facilities, such as a shock tunnel, are to be operated at the specific pressure ratio according to the desired test condition. A metallic diaphragm is machined or a forced rupture device is used to open it at a specific pressure ratio. The diaphragm opening procedure takes several hundred microseconds including rupture and deformation. This process is expected to affect the test conditions. In this study, numerical simulation was performed for different materials, thicknesses, and opening ratios. And the characteristics of shock wave generation and the stagnation condition in the tube are investigated. Results show that the final opening ratio and rupturing procedure directly affect the speed of a shock wave, stagnation pressure, and test time.

• Education of Primary School Mathematics
• /
• v.15 no.3
• /
• pp.219-233
• /
• 2012

Practicality and value of mathematics can be verified when different problems that we face in life are resolved through mathematical knowledge. This study intends to identify whether the fraction teaching is being taught and learned at current elementary schools for students to recognize practicality and value of mathematical knowledge and to have the ability to apply the concept when solving problems in the real world. Accordingly, contextual problems and noncontextual problems are proposed around fractional arithmetic area, and compared and analyze the achievement level and problem solving processes of them. Analysis showed that there was significant difference in achievement level and solving process between contextual problems and noncontextual problems. To instruct more meaningful learning for student, contextual problems including historical context or practical situation should be presented for students to experience mathematics of creating mathematical knowledge on their own.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.291-297
• /
• 2019

Fluid flow through rock fractures has been quantified using equations such as Stokes equations, Reynolds equation (or local cubic law), cubic law, etc. derived from the Navier-Stokes equations under the assumption that linear flow prevails. Therefore, these simplified equations are limited to linear flow regime, and cause errors in nonlinear flow regime. In this study, causal mechanism of nonlinear flow and critical Reynolds number were presented by carrying out fluid flow modeling with both the Navier-Stokes equations and the Stokes equations for a three-dimensional rough-walled rock fracture. This study showed that flow regimes changed from linear to nonlinear at the Reynolds number greater than 10. This is because the inertial forces, proportional to the square of the fluid velocity, increased enough to overwhelm the viscous forces. This tendency was also shown for the unmated (slightly sheared) rock fracture. It was found that nonlinear flow was caused by the rapid increase in the inertial forces with increasing fluid velocity, not by the growing eddies that have been ascribed to nonlinear flow.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.34-42
• /
• 2022

A correlation between propellant supply condition and chamber pressure in GCH₄-LOx small rocket engine was explored and hot-firing tests were conducted to analyze the engine performance characteristics according to the equivalence ratio variation at a constant chamber pressure. Correlation studies have shown that chamber pressure is linearly proportional to oxidizer supply pressure. As a result of the test, the thrust, specific impulse and characteristic velocity that are the main performance parameters of a rocket engine, were found to be enhanced as the equivalence ratio starting from a fuel-lean condition approached the stoichiometric ratio, but the efficiencies of characteristic velocity and specific impulse were on the contrary, in their dependency on the equivalence ratio.