• Title/Summary/Keyword: 비스페놀-A

Search Result 116, Processing Time 0.028 seconds

Corrosion-Inhibition and Durability of Polymer-Modified Mortars Using Bisphenol A and F Type Epoxy Resin with Calumite (비스페놀 A 및 F형 에폭시수지와 칼루마이트를 병용한 폴리머 시멘트 모르타르의 방청성 및 내구성)

  • Kim, Joo-Young;Kim, Wan-Ki
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.4
    • /
    • pp.517-524
    • /
    • 2014
  • Nitrite-Type hydrocalumite (calumite) is a material that can adsorb chloride ions ($Cl^-$) that cause corrosion of reinforce bars and liberate the nitrite ions ($NO_2{^-}$) that inhibit corrosion in reinforced concrete. In this study, polymer-modified mortars using two types of epoxy resin with calumite are prepared with various polymer binder-ratios of 0, 5, 10, 15, 20% and calumite contents of 0, 5%. The specimens are tested for chloride ion penetration, carbonation, drying shrinkage and corrosion inhibition. As a result, the chloride ion penetration and carbonation depth of PMM using epoxy resin somewhat increases with increasing calumite contents, but those remarkably decreases depending on the polymer-binder ratios. The 28-d drying shrinkage shows a tendency to decrease with increasing polymer-binder ratio and calumite content. Unmodified mortars with calumite content of 5% did not satisfy quality requirement by KS. However, it was satisfied with KS requirement by the modification of epoxy resin in cement mortar. On the whole, the carbonation and chloride ion penetration depth of epoxy-modified mortars with calumite is considerably improved with an increase in the polymer-binder ratio regardless of the calumite content, and is remarkably improved over unmodified mortar. And, the replacement of the portland cement with the calumite has a marked effect in the corrosion-inhibiting property of the epoxy-modified mortars.

Degradation of Bisphenol A and Removal of Its Estrogenic Activity by Two Laccase Transformants of Irpex lacteus (기계충버섯 형질전환체를 이용한 비스페놀 A의 분해와 에스토로겐 활성 제거)

  • Kim, Yun-Jung;Song, Hong-Gyu;Choi, Hyoung-T.
    • Korean Journal of Microbiology
    • /
    • v.44 no.3
    • /
    • pp.199-202
    • /
    • 2008
  • A white rot fungus Irpex lacteus produced lignin degrading enzymes, which showed degrading activity against various recalcitrant compounds. However, laccase, one of the lignin degrading enzymes, was too low to be assayed by spectrophotometry using o-tolidine as the chromogenic substrate in this fungus under various culture conditions. A laccase expression vector was constructed using a cDNA from Phlebia tremellosa with the constitutively expressed promoter of glyceraldehydes-3-phosphate dehydrogenase gene, and introduced into I. lacteus by the restriction enzyme mediated integration transformation through the protoplast-$CaCl_2$ procedure. Two transformants showed highly increased laccase activities at the early growth phase in the minimal liquid medium, and they not only degraded bisphenol A, a notorious endocrine disrupting chemical, but also removed the estrogenic activity effectively.

Depolymerization of Polycarbonate Using Glycolysis/Methanolysis Hybrid Process (폴리카보네이트의 글리콜첨가분해/메탄올첨가분해 복합 해중합)

  • Kim, D.P.;Kim, B.K.;Cho, Y.M.;Kim, B.S.;Han, M.
    • Clean Technology
    • /
    • v.13 no.4
    • /
    • pp.251-256
    • /
    • 2007
  • Several studies regarding depolymerization of polycarbonate waste to get the essential monomer, bisphenol A, have been reported in recent years. However, those methods have some environmental safety problems of using highly toxic organic solvents as well as product separation problem due to the use of alkali catalyst. In this study, we proposed the combination of glycolysis and methanolysis to depolymerize the polycarbonate waste. Glycolysis reaction reached at the reaction equilibrium after about 180 minat 473.15K and dissolution of the polycarbonate was found to be a rate controlling step of the reaction. The yield of BPA was improved with the aid of combination of glycolysis and methanolysis. The methanolysis was carried out at a temperature range of $303.15K{\sim}363.15K$ and MeOH/PC molar ratio $0.5{\sim}3$. The yield of BPA had a maximum at 1.0 MeOH/PC molar ratio and increased with the reaction temperature.

  • PDF

포장과 법률-기구 및 용기.포장의 기준 및 규격 일부개정고시

  • Korea Packaging Association INC.
    • The monthly packaging world
    • /
    • no.7 s.183
    • /
    • pp.124-143
    • /
    • 2008
  • 식품의약품안전청은 식품의 기구나 용기로 사용되는 금속제에 대해 납, 크롬, 니켈 등 용출규격을 강화하고 내분비계장애물질(환경호르몬)으로 의심되는 비스페놀 A에 대해서도 강화된 기준을 마련하여 입안 예고 했다. 식약청은 현재 분리되어 있는 금속제 및 금속관의 규격을「금속제」로 통합하고 크롬 및 니켈에 대한 용출규격을 각각 0.1mg/L 이하로 신설하고자 하며, 납 0.1% 이상 함유한 금속으로 기구 및 용기포장의 식품과 직접 접촉하는 부분을 제조 금지토록 하는 등을 주요내용으로 정했다. 본 고에서는 주요 내용과 법안을 살펴보고 신.구조문을 비교해 살펴보도록 한다.

  • PDF

포장과 법률 - 기구 및 용기.포장의 기준 및 규격 일부개정고시

  • 식품의약품안전청
    • The monthly packaging world
    • /
    • s.190
    • /
    • pp.124-144
    • /
    • 2009
  • 식품의약품안전청이 가구 및 용기 포장의 기준 및 규격 일부를 개정고시했다. 식약청은 폴리카보네이트 등에 대해 비스페놀 A의 규정과 유리제, 도자기제 등에 대해 납, 카드뮴 규격을 강화하며, 금속관 및 금속제의 규격을 단일화하고 용출규격 강화 및 폴리아미드/나일론 재질에 대한 4,4‘-메틸렌디아닐린 용출규격을 신설하여 식품용 기구 및 용기 포장의 안전성을 확보하고자 한다. 본고에서는 주요 내용과 함께 신문구조문을 비교해 살펴보도록 한다.

  • PDF

Decomposition Characteristics of Bisphenol A by a Catalytic Ozonation Process (오존촉매산화공정에 의한 비스페놀 A의 분해특성)

  • Choi, Jae Won;Lee, Hak Sung
    • Applied Chemistry for Engineering
    • /
    • v.26 no.4
    • /
    • pp.463-469
    • /
    • 2015
  • Bisphenol A (BPA) in aqueous solution was measured using HPLC technique, which was established by acetonitrile analysis and KDP solution analysis methods. In these experiments the decomposition characteristics of BPA were compared using the ozone alone, ozone/pH 10, and ozone/hydrogen peroxide processes. About 70% of 10 mg/L of BPA was removed during 60 min by the ozone alone process, while 10 mg/L of BPA was completely removed by the ozone/pH 10 and ozone/hydrogen peroxide processes in 40 min and 60 min, respectively. The final decomposition efficiency drawn from results of TOC and HPLC analyses showed that the ozone/hydrogen peroxide process was the best among them, whereas the concentrations of TOC and reaction intermediates when using the ozone/pH 10 process were higher than those of the ozone alone process after 60 min of reaction. The ozone/hydrogen peroxide process was the most efficient among them when oxidizing organic carbons in water to $CO_2$ and $H_2O$.

Styrene-free Synthesis of Flame-retardant Vinyl Ester Resin Films for Hot-melt Prepreg Process (핫멜트 프리프레그 공정용 난연성 비닐에스터 수지 필름의 무 스티렌 합성)

  • Jiseon, Kang;Minji, Kim;Mongyoung, Huh;Seok Il, Yun
    • Composites Research
    • /
    • v.35 no.6
    • /
    • pp.412-418
    • /
    • 2022
  • Flame-retardant vinyl ester (VE) resin films were developed from the mixtures of brominated and non-brominated epoxy resins via esterification with methacrylic acid without reactive diluents. The films were used to fabricate carbon fiber (CF) prepregs via a hot melt impregnation process. The viscosity of VE resins suitable for film production was optimized by mixing low-viscosity bisphenol-A and high-viscosity brominated bisphenol-A epoxy precursors. Increasing the bromine content of the cured VE resin further increased the limited oxygen index (LOI) (39%), storage modulus (2.4 GPa) at 25℃ and residual carbonization (16.1%) values compared to non-brominated VE. Manual layup of as-prepared VE prepregs with subsequent curing led to the successful fabrication of CF-reinforced composites with high tensile and flexural strength. The results from the study hold high promise for a styrene-free, environmentally friendly VE composite process in the future.

Toxic effects of Aroclor 1016 and bisphenol A on marine green algae Tetraselmis suecica, diatom Ditylum brightwellii and dinoflagellate Prorocentrum minimum (해양 녹조류 Tetraselmis suecica, 규조류 Ditylum brightwellii, 와편모조류 Prorocentrum minimum에 대한 Aroclor 1016과 비스페놀 A의 독성 효과)

  • Ebenezer, Vinitha;Ki, Jang-Seu
    • Korean Journal of Microbiology
    • /
    • v.52 no.3
    • /
    • pp.306-312
    • /
    • 2016
  • Microalgae are the potential bioindicators of environmental changes, for the environmental risk assessment as well as to set limits for toxic chemical release in the aquatic environment. Here, we evaluated the effects of two endocrine disrupting chemicals (EDCs), namely bisphenol A (BPA) and Aroclor 1016, on the green algae Tetraselmis suecica, diatom Ditylum brightwellii, and dinoflagellate Prorocentrum minimum. Each species showed wide different sensitivity ranges when exposed to these two EDCs; the 72 h effective concentration ($EC_{50}$) for these test species showed that Aroclor 1016 was more toxic than BPA. $EC_{50}$ values for the diatom D. birghtwellii were calculated at 0.037 mg/L for BPA and 0.002 mg/L for Aroclor 1016, representing it was the most sensitive when compared to the other species. In addition, these results suggest that these EDC discharge beyond these concentrations into the aquatic environments may cause harmful effect to these marine species.

Analytical Determination of Alkylphenols, Chlorophenols and Bisphenol A in Biota Samples using Gas Chromatography/Mass Spectrometry (기체 크로마토그래피/질량분석기를 이용한 생물시료 중 알킬 페놀류, 클로로페놀류 및 비스페놀 A의 분석법)

  • Hong, Jongki;Kim, Hyup;Baek, In-Girl;Kim, Do-Gyun;Seo, Jung-Joo;Seo, Jong-Bok;Chung, Bong-Chul;Pyo, Hee-Soo;Kim, Kyung-Rae;Kim, Yong-Hwa
    • Analytical Science and Technology
    • /
    • v.13 no.4
    • /
    • pp.484-493
    • /
    • 2000
  • The simultaneous analysis of alkylphenols, chlorophenols and bisphenol A in biota samples was performed by gas chromatography-mass spectrometry-selected ion monitoring mode. The phenols were extracted from sample with organic solvent and Forisil and Silica columns for clean-up procedure were compared. Recovery studies were performed at 1-ppm level of phenols added to each biota sample. Their recoveries ranged between 83 and 116% with coefficient of variations of 2.4-11.9%. To improve the detection limits of phenols, trimethylsilyl (TMS) derivatization was applied. The gas chromatographic properties of free phenols and TMS derivatized phenols were also investigated.

  • PDF