• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.730-736
• /
• 2012

PN(Pseudo Noise) sequences play an important role in wireless communications, such as in a CDMA(code division multiple access) communication system. If there is a crash when multiple users simultaneously connected to a system, then PN sequences with low correlation help to minimize multiple access interference in such communication system. In this paper we propose a family of non-linear extended binary sequences with low cross-correlations and the family include $m$-sequence, GMW sequence, Kasami sequence and No sequence with optimal cross-correlation in terms of Welch bound. And we analyze cross-correlation of these sequences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.305-315
• /
• 2003

MC-CDMA(Multicarrier code division multiple access), which is based on a combination of OFDM(orthogonal frequency division multiplexing) and CDMA(code division multiple access), has gained a lot of interests in wireless multimedia communications, as high speed data transmission is required for mobile services. MC-CDMA has many advantages for broadband high speed data transmission in multipath environment because it can offer both advantages of the CDMA and the OFDM. However, A high PAPR(peak to average power ratio) problem, which is a major drawback of OFDM, is also shown in the MC-CDMA. In this paper, we propose a new phase factor optimization scheme to reduce complexity in PTS(partial transmit sequence) to reduce PAPR. We also analyze the performance of the MC-CDMA with various PTS schemes to investigate the relations between PAPR characteristics and effect of nonlinear distortion of a high power amplifier. Our simulation results reveal that the proposed PTS scheme reduces PAPR about 0.2∼0.5 dB even with 25% reduced- complexity compared to the conventional scheme.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2000

We propose a modified nonlinear fiber optic interferometer which can serve to generate binary optical pulse sequences for CDMA networks, and to decode them. In one arm cross-phase modulation between a CW signal and a counter- or copropagating high-power pulse takes place in sequences of segment connected via VDM couplers. Preliminary experimental results on code generation as well as autocorrelation and crosscorrelation are presented, using Sagnac interferometer. As we expected, the experimental results show that the outputs of the interferometer device are not summed simply on the basis of power, but the sin-squared version of it. Arbitrary codes can in principle be implemented.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.263-269
• /
• 2012

Code-Division Multiple-Access(CDMA) allows several users simultaneous access to a common channel by assigning a distinct pseudonoise sequence called spectrum code to each user. Each user in a CDMA system uses a assigned spectrum code to modulate their signal. Choosing the codes used to modulate the signal is very important in the performance of CDMA systems. The best performance will occur when there is good separation between the signal of a desired user and the signals of other users. The receiver synchronizes the code to recover the data. The use of an independent code allows multiple users to access the same frequency band at the same time. In this paper we propose a generalized model of non-linear binary sequence using trace function and analyze cross-correlation of these sequences. These sequences with low correlation, large linear span and large family size, in a direct-sequence spread spectrum communication system, help to minimize multiple access interference, increase security degree of system and enlarge user number.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2130-2134
• /
• 2007

선형 Boussinesq 형태의 파동방정식을 지배방정식으로 사용하는 능동적인 분산보정 지진해일 전파 유한 차분모형의 정확도를 향상시키기 위한 새로운 동시격자접속기법을 개발하였다. 이 격자접속기법은 공간에 대해 3차 보간식을 사용하므로 짧은 파에 대해서 보간에 따른 오차를 최소화할 수 있고, 시간에 대해 2차 보간식을 사용하기 때문에 기존 기법에 비해 더 정확한 값을 얻을 수 있다. 개발된 격자접속기법의 정확성을 평가하기 위해 수중 원형천퇴상을 전파하는 Gaussian 형상의 가상지진에 대해 격자접속기법을 적용하지 않고 계산한 결과와 격자접속기법을 적용하여 계산한 결과를 FUNWAVE에 포함되어 있는 선형화된 Boussinesq방정식에 의해 계산된 수치해와 비교하였다. 그 결과 개발된 동시격자접속기법의 우수함이 검증되었다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.4
• /
• pp.295-306
• /
• 2010

Contrary to an intact rock, the jointed rock mass shows strain-dependent deformation characteristics (elastic modulus and damping ratio). The maximum elastic modulus of a rock mass can be obtained from an elastic wave-based exploration in a small strain level and applied to seismic analyses. However, the assessment and application of the non-linear characteristics of rock masses in a small to medium strain level ($10^{-4}{\sim}0.5%$) have not been carried out yet. A non-linear dynamic analysis module is newly developed for FLAC3D to simulate strain-dependent shear modulus degradation and damping ratio amplification characteristics. The developed module is verified by analyzing the change of the Ricker wave propagation. Strain-dependent non-linear characteristics are obtained from disks of cored samples using a rock mass dynamic testing apparatus which can evaluate wave propagation characteristics in a jointed rock column. Using the experimental results and the developed non-linear dynamic module, seismic analyses are performed for the intersection of a shaft and an inclined tunnel. The numerical results show that vertical and horizontal displacements of non-linear analyses are larger than those of linear analyses. Also, non-linear analyses induce bigger bending compressive stresses acting on the lining. The bending compressive stress concentrates at the intersection part. The fundamental understanding of a strain-dependent jointed rock mass behavior is achieved in this study and the analytical procedure suggested can be effectively applied to field designs and analyses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.686-694
• /
• 2002

In this paper, we introduce an improved sorting method of the IGIC(Improved initial stage Grouping Interference Canceller) system for advanced BER(Bit Error Rate) performance in DS-CDMA. Among non liner Interference Cancellers, the PIC(Parallel IC) with advanced initial stage by sorting method has the name of the IGIC(Improved initial stage Grouping Interference Canceller) system. In this system, All group are shared with the same number of users. But, if each group are divided the same users, so that difference of the signals strength appeared greatly in the same group. Up to this time, the weak signals have more effect of the MAI (Multiple Access Interference) from the strong signals in the same group. The proposed IC (Interference Canceller) to solve those problems has a better performance by using improved sorting method from IGIC system. A new sorting method is the technique that the strength of signals would be liked in the same group. So, the MAI is reduced as difference of signal strength minimize. Analysis of performance assayed to make comparison with other non liner interference canceller when power controlled and not one.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.93-102
• /
• 2005

This paper presents an interface configuration between Access Point(AP) and Radio Over Fiber (ROF) transceiver for the wireless internet system. The wireless internet could provides 60km/h mobility and 50Mbps IP based data services for each mobile terminal. Thus, cost effective cell infrastructure is inevitably required. This paper suggests an interface configuration between AP and passive integrated picocell(PIP) involving ROF links. Nonlinear characteristics of ROF link using a typical FP transceiver are measured for wireless internet applications.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.13-19
• /
• 1985

Servo의 안정성: Servo는 정상상태, 과도상태의 특성을 문제삼기에 앞서 먼저 안정하지 않으면 안된다. 제어량과 제어편차와 같이 제어 loop 속의 신호가 일정치에 수검하지 않는 현상을 불안정이라 한다. 제어량의 feedback을 정(positive)으로 하며 일반 목표치에는 수검하지 않고 제어편차는 단조롭게 정, 또는 부(negative)의 방향으로 발산한다. 이것은 접속 잘못에 의한 이상현상에 속한다. 이것에 대해서, 부 feeeback으로 하여도 제어 량이 목표치에 수검하지 않고 지속적으로 진동하는 불안현상도 있다. 이들은 선형발진과 비선형발진으로 구분할 수 있다.

• 전기의세계
• /
• v.39 no.9
• /
• pp.39-45
• /
• 1990

전자 액츄에이터의 일종인 LPM(linear pulse motor)은 직선왕복 운동을 필요로 하는 모든 응용기기의 구동에 적합한 선형 전동기로서 직접구동(direct drive)방식을 채택함으로써 회전형 전동기를 사용하는것과는 달리 감속장치, 동력전달 기구가 불필요하여 전체시스템의 구성에서 부품의 수를 줄일 수 있기 때문에 제품의 신뢰성이 향상되고 소형경량화 할 수 있다. 또한 LPM은 기계적 구조가 간단하고 비접속 직접구동이 가능하므로 기기의 특성 변화가 적고 보수성이 우수한 성능을 가지고 있다.