• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.10-16
• /
• 2012

Currently, the majority of systems which are non-linear are in need of the correct system equations for controlling and monitoring. Therefore, the correct estimation of parameters is crucial. Generally, parameters are changed due to system deterioration or sudden environmental alterations. Given the limitations of system monitoring unstable controls can arise. In the following paper, the parameter estimation method is proposed using software filters to combat these system instabilities. For dynamic instances, a powerful particle filter is used to control the nonlinear and noisy environments in which they take place. Using a setup simulation comprised of a slider and pendulum, the state variable of noise is obtained. After collecting the data, the proposed algorithm is used to estimate both the state variable and its parameters. Finally, these results are checked with correct parameter estimations to evaluate and verify the algorithms performance.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.375-380
• /
• 2012

In this study, dynamic load and dynamic contact force between a building block and wire ropes of a goliath crane are calculated during lifting or turn-over of a building block for the design of an optimal lug arrangement system. In addition, a multibody dynamics kernel for implementing the system were developed. In the multibody dynamics kernel, the equations of motion are constructed using recursive formulation. To evaluate the applicability of the developed kernels, the interferences and dynamic contact force between the building block and wire ropes were calculated and then the hull structural analysis for the block was performed using the calculation result.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.326-328
• /
• 2000

인공신경회로망 기술은 선형 또는 비선형성 계산 문제를 복잡도에 무관하게 학습에 의해 자동으로 근사한다. 또한 알고리즘이 단순하며 잡음에 강하여 다양한 분야에 적용되고 있다. 반면 대상시스템의 특성이나 조건이 변경되면 계산성능을 보장할 수 없고, 계산의 신뢰성 보장 한계가 모호하기 때문에 제어문제에는 실용화가 어려운 것으로 알려져 있다. 제안 모델은 인공신경회로망의 장점을 유지하면서, 위와 같은 문제점을 해결한다. 시뮬레이션을 통하여 제안 모델은 기존 제어기에 비해 우수한 추종제어성능을 보이는 것으로 밝혀졌다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.1
• /
• pp.105-110
• /
• 2017

This paper introduces a heave compensation system for offshore crane when it subjected to unexpected disturbances such as ocean waves, tidal currents or winds and their external force. The dynamic model consists of a crane which is considered to behave in the same manner as a rigid body, a hydraulic driven winch, an elastic rope and a payload. To keep the payload from moving upwards and downwards, PD(Proportional-Derivative) control was applied by using linearization. In order to achieve a better performance, the sliding mode control and the nonlinear generalized predictive control algorithm was applied according to the time-delay. As a result, the oscillating amplitude of the payload was reduced by the control algorithm. Considering the time-delay involved in the system to be one second, nonlinear generalized predictive controller with a robust controller was a suitable control algorithm for this heave compensation system because it made the position of te payload reach the desired position with the minimum error. This paper presented a control algorithm using the robust control and its simulation results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1585-1591
• /
• 2008

Recently it is tried to use load control for maneuver moving object. MIN design method proposed to solve control problem of nonlinear system using load concept. Min design method shows direct method for finding control value on the load control model. In this paper, is shown load control value for problem of line of sight on missile guidance. The load control value keep given velocity of missile and angle of attack for tracking target.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.26-30
• /
• 2012

This paper presents the observer design method for discrete-time nonlinear systems with delayed output. It is shown that by considering a nonlinear term of error dynamics as an additional state variable, the discrete-time nonlinear error dynamics with time delay can be transformed into the discrete-time linear one with time delay. Sufficient conditions for existence of state observer are characterized by linear matrix inequalities. Finally, an illustrative example is given in order to show the effectiveness of our design method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.93-104
• /
• 2000

적충되어 있는 다중 블록 시스템은 역사적 건물이나 문화재등에 자주 사용되고 있다. 이러한 구조시스템은 지진에 매우 취약하고, 특히 세장한 구조물인 경우에는 낮은 수준의 지반가속도에 대해서도 전도가 일어날 수 있다. 지진으로부터 이러한 구조물을 보호할 수 있는 방법중의 하나로써 지진격기받침의 사용을 들 수 있으나, 아직 격리받침이 설치되어 있는 다중블록의 거동에 대해서는 잘 알려지지 않는 실정이다. 이 논문에서는 각각 P-F 시스템, FPS, LRB 시스템이 설치되어 있을때의 세장한 강체 블록의 동적거동에 대해 살펴보았다. P-F 시스템과 FPS에서의 마찰모델은 Coulomb의 마찰법칙을 이용하였도, 상부구조물은 붙음(stick)모드와 록킹(rocking) 모드만이 존재하도록 가정하였다. 충격은 개별요소법(distinct element method, DEM)을 이용해 기술하였고, 조화입력운동에 대한 응답을 조사하였다.

• New & Renewable Energy
• /
• v.7 no.4
• /
• pp.50-57
• /
• 2011

A wind turbine simulation program for the coupled dynamics of aerodynamics, elasticity, multi-body dynamics and controls of turbine is newly developed by combining an aero-elastic code and a multi-body dynamics code. The aero-elastic code, based on the blade momentum theory and generalized dynamic wake theory, is developed by NREL(National Renewable Energy Laboratory, USA). The multi-body dynamics code is commercial one which is capable of accounting for geometric nonlinearity and twist deflection. A turbulent wind load case is simulated for the NREL 5-MW baseline wind turbine model by the developed program and FAST. As a result, the two results agree well enough to verify the reliability of the developed program.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.817-826
• /
• 2002

Many researchers have been tried to forecast the future as analyzing data characteristics and the forecasting methodology may be divided into two cases of deterministic and stochastic techniques. However, the understanding data characteristics may be very important for model construction and forecasting. In the sense of this view, recently, the deterministic method known as nonlinear dynamics has been studied in many fields. This study uses the geometrical methodology suggested by Poincare for analyzing nonlinear dynamic systems and we apply the methodology to understand the characteristics of known systems and hydrologic data, and determines the possibility of forecasting according to the data characteristics. Say, we try to understand the data characteristics as constructing Poincare map by using Poincare section and could conjecture that the data sets are linear or nonlinear and an appropriate model.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.81-85
• /
• 2000

EEG(electroencephalogram)는 주로 전문가의 판독에 따른 주관적 판단에 의존하여 임상에서 사용되어져 왔다. 그러나 비선형 동역학 분석을 이용한 해석학적인 정량화 연구가 진행 되어짐에 따라 특이 패턴을 이용한 환자의 질병진단 이외에도 정상인의 뇌 활동 및 인지기능 둥을 이해하기 위한 도구로써 그 활용범위가 넓어지고 있다. 본 논문에서는 정상인에게 다양한 자극을 준 후 측정한 EEG를 상관차원 분석법을 이용하여 다양한 자극에 대한 뇌파의 특징을 분석하였다. 그 결과 각 자극에 따른 뇌 활동도의 차이를 정량적으로 분석할 수 있었으며, 뇌 활동 부위와 자극과의 관계도 정량적으로 분석할 수 있었다.