• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.91-96
• /
• 2012

Recently, the research of security and its related problems has been received great interested. The research for hper-chaos systems and its synchronization are actively processing as one of method to apply to secure and cryptography communication. In this paper, we propose the synchronization method by coupling coefficient of linear and nonlinear in order to accomplish the synchronization of hyper-chaos system that organized by SC-CNN(State-Controlled Cellular Neural Network). We also verify and confirm the result of synchronization between entire transmitter and receiver, and each subsystem in transmitter and receiver through the phase portrait and difference of time-series by the computer simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.57-61
• /
• 1993

본 연구목적은 선형부분구조물과 그 부분구조물들을 결합하는 비선형연결부 로 이루어진 구조물을 해석하기 위해 비선형 연결부의 모델변화를 효과적으 로 규명하는데 있다. 제안된 방법은 시간영역에서만 계산이 가능하였던 힘- 상태 사상법을 주파수영역으로 확장함으로써, 전체구조물에서 선형부분구조 물들은 분리 해석이 가능하고, 시간영역의 많은 데이터를 줄일 수 있는 장점 이 있다. 제안된 방법의 타당성 및 장점을 검증하기 위해서 쿨롱마찰 비선형 특성을 갖는 두 가지의 구조물에 대하여 각각 실험적으로 연결부의 매개변 수를 규명하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.372-379
• /
• 1994

In this study, the describing function is adopted to represent nonlinearity in the system equations. The compliance can be obtained by solving nonlinear simultaneous algebraic quations for multi-degrees-of-freedom system with multinonlinearities. When the technique is applied, the nonlinearity of the system can be identified from the compliance which is obtained from the sinusoidal excitation of the system. By employing the describing function in the Building Block Analysis, we can extensively develop the BBA into investigation of the continuous systems with nonlinearities. The evaluated compliance can quantitatively show the effects of nonlinearity such as the transfer of the natural frequency, the variance of the compliance at the natural frequency, and the jump phenomena which occur during sweeping of the excitation frequency.

• Computational Structural Engineering
• /
• v.10 no.1
• /
• pp.213-223
• /
• 1997

In the analysis of the behavior of a complex structure, it requires much time and cost to analyze its behavior by using shell elements at the early design concept. For the purpose of the decrease of time and cost, many researches have been performed with the intention to analyze its behavior through replacing a shell model by a simple beam model. In the present study, a method is proposed for determining a bending spring stiffness which means the flexibility for applying into the joints of the simple beam model. Geometrically nonlinear analysis is performed through the application of the determined flexibility into joints of the simple beam model. The nonlinear behavior of thin-walled tube shell structure can be described within a little error through the simple beam model with flexible joints.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.238-243
• /
• 1994

본 논문에서는 여러가지 형태의 결합부에 적용할 수 있는 일반적인 모델링 기법에 대하여 기술하였다. 기존의 해석방법은 특정한 결합부에만 적용이 가능하고 유한요소해석과 실험이 상호 보완적인 관계를 가진 형태의 해석방법이므로 실험이 불가능한 경우에 대해서는 적용하기 어려운 경우도 있다. 본 논문에서는 별도의 실험을 수행하지 않고 결합부 영역만을 상세하게 유한요소 모델링을 하여서 선택된 자유도에 대한 유연성 행렬(Flexibility Matrix)을 구하여 결합부의 특성을 구하는 일반적 모델링 기법을 제시하였다. 이 방법은 수치적으로 축약할 수 없는 모델-결합부가 접촉면(Contact Surface)을 가지고 있는 구조물을 효과적으로 축약할 수 있는 장점이 있다. 또한 모델링되는 결합부의 경계조건의 영향을 배제할 수 있으며 결합부에 존재하는 비선형성도 적정범위내에서 선형화할 수 있다. 제시한 일반적 모델링 기법을 나사 결합부, 접착제 결합부(Glued Joints), 볼트 결합부에 적용하여 결합부이 특성을 구하였으며 실험을 통하여 제시한 해석방법의 타당성을 검증하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.241-250
• /
• 2000

Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor, and a nonlinear resistor. In this paper, a transmitter and a receiver using two identical Chua's circuits are proposed and synchronizations and secure communication of a lossy equivalent transmission are investigated. Since the synchronization of the lossy equivalent transmission system is impossible by coupled synchronization, theory having both the drive-response and the coupled synchronization is proposed. The proposed method is synthesizing the desired information with the chaos circuit by adding the information signal to the chaos signal in the lossy equivalent transmission system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.324-330
• /
• 1990

In this study, in order to perform dynamic design of machine tools reasonably and effectively, a method was formulated to be applicable to the damped structures connected by joints having elasticity and damping by using substructure synthesis method. And a nonlinear solution method was proposed and it formulates the nonlinear parts by describing functions and uses the reducing transformation matrix by the substructure synthesis method. The results of frequency response analysis of a machine tool, where an NC lathe was partitioned by three parts of spindle, housing and bed-base part and the nonlinearity of bearing parts between spindle and housing was modelled, showed force dependency of the response.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.269-272
• /
• 2004

본 논문은 비선형 시스템의 퍼지모델을 위해 정보 granules 기반 퍼지 추론 시스템의 새로운 설계 및 이의 최적화를 제시한다. 퍼지모델은 주로 경험적 방법에 의해 추출되기 때문에 보다 구체적이고 체계적인 방법에 의한 동정 및 최적화 될 필요성이 요구된다. 일반적으로, 정보 granules는 근접성, 유사성 또는 기능성 둥에 인하여 서로 결합되는 요소(특히, 수치 데이터)의 실체이다. 제안된 퍼지 모델은 정보 데이터의 특성을 살리기 위해 HCM 클러스터링 방법에 의해 전반부/후반부 구조 및 파라미터 동정을 시행한다. 두 가지 형태의 퍼지 추론 방법은 간략 추론과 선형추론에 의해 수행되며 삼각형 멤버쉽 함수를 사용한다. 구축된 정보 granule 기반 퍼지 모델은 유전자 알고리즘을 이용하여 전반부 파라미터를 최적으로 동정한다. 제안된 비선형 모델의 성능평가는 수치적인 예를 통해 비교 평가한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.197-204
• /
• 2012

We propose a new scheme combining the compensation of HPA nonlinearity and the calibration of the path imperfections in the downlink OFDM smart antenna systems. We use a two term third-order polynomial (without second-order term) and the feedforward method for compensation and calibration to make each path of the antenna array have equal characteristics. Since the proposed scheme does not alter the base-band signal, it can be applied to the smart antenna system independently of the base-band signal processing section. The result of computer simulations shows that, with the addition of only one third-order term, the adverse nonlinear effects can be effectively compensated, and the those of linear imperfections can be calibrated as well.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.220-227
• /
• 1998

In substitution of beam-nonlinear spring model for real-car, it may have errors due to complicated characteristics of joint and overestimation of joints stiffness. In this research, a method for the joint modeling was suggested by nonlinear static and dynamic analyses of beam and shell joint models and verified by the application of accomplished joint modeling method to simplified full car model. In consequence, modified simplified full car model was improved in local acceleration and rigid wall force. Finally, the frontal crash analyses with the dummy were established and the accelerations of accelerations of head, chest and pelvis had good agreements with those of shell model.