• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.31-32
• /
• 2000

내연기관으로 작동되는 자동차는 크게 도로용(Onroad)과 비도로용(Nonroad)으로 구분되며, 비도로용 차량은 크게 자동차이외의 교통수단(철도, 항공, 선박)과 건설장비, 농업용기계 등을 일컫는다. 이러한 비도로용 엔진들은 주요 대기오염원으로 부각되어 최근 미국, 유럽둥 선진국에서 배출규제를 시작하였다. 우리나라는 선진국에 비해 휘발유 가격대비 경유가격이 낮기 때문에 경유차량의 보유비율도 상대적으로 높아 경유자동차에 의한 대기오염이 심각한 실정이다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.109-110
• /
• 2003

우리나라에서의 철도는 도로교통에 비해 수송분담율이 상대적으로 낮지만, 2001년을 기준으로 1년 동안 824만 명을 수송하여 전체 여객 수송량의 약 6.2 %를 차지하고 있다. 최근 연구결과 비도로용으로 사용되고 있는 디젤엔진이 NOx와 입자상 오염물질 배출의 주요한 오염원으로 밝혀졌다. 국내외적으로 대기오염원 중 자동차나 트럭 등 도로용 차량에서 배출되는 오염물질에 대해서는 오래 전부터 관심을 기울여 왔지만, 디젤기관차, 선박 및 경작, 건설, 벌목, 채굴 장비 등을 포함하는 비도로용 이동오염원에 의한 오염물질 배출제어에 관해서는 논의가 거의 이루어진 적이 없었다. (중략)

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.3
• /
• pp.317-325
• /
• 1999

The demand of diesel engine on the construction equipment has been rapidly increased because of high thermal efficiency and fuel economy. The exhaust emission from nonroad vehicles equipped with diesel engine such as construction equipment, ship, and agricultural equipment, etc. Which are known to be harmful to human health and environment, has not been regulated in our country. But the regulation for nonroad vehicle has been already progressed in advanced country. So we investigated the contribution ratio of air pollution by construction equipment in order to establish the exhaust emission management strategy for nonroad vehicle. Based on the statistical data for construction equipment, 5 kinds of equipment are selected and tested in the engine dynamometer to determine the emission factor. And the amount of air pollutant from construction equipment are calculated by using of the emission factor and recommended exhaust emission standard for construction equipment.

• Journal of the KSME
• /
• v.36 no.9
• /
• pp.855-866
• /
• 1996

승요차 앞자축에 장착되어 회전하면서 동력을 전달하는 드라이브축은 운행중에 주로 비틀림하중을 받는다. 따라서 동 부품의 피로해석 및 설계를 위해서는 실제 운행중에 받는 서비스토크의 크기, 주파수 등에 관한 데이터가 필요하다. 차량에 탑재된 엔진의 토크와 회전수 등의 규격으로부터 드라이브축에 부가되는 최대 토크 값을 예측할 수 있으나, 자동차 운행주에는 승차인원, 도로조건, 운전자의 운전습관 등 여러가지 외적인 영향으로 인하여 서비스토크가 불규칙하게 변할 것으로 예상되므로 서비스토크를 정확히 예측하기는 어려운 실정이다. 또한, 최근의 자동차 구조부품에 대한 설계개념이 무한수명 설계에서 경량화 설계로 변화되고 있으며, 따라서 자동차 드라이브축도 실제 운용하중을 바탕으로 한 정확한 수명예측 및 강도설계가 요구되고 있다. 본 연구에서는 4륜구동형 승용차용 드라이브축에 대해 실제 운용하중에서의 피로수명을 예측하기 위해 1)텔리메트리를 이용하여 토크를 측정하고, 2) 일정진촉하중하에서의 드라이브축의 비틀림 피로시험을 수행하고, 3) 일정진폭하중하에서의 드라이브축의 비틀림 피로시험을 수행하고, 4) 축류 소재의 피로특성 데이터를 구성하여 5) 자체 개발한 프로그램으로 피로수명을 예측하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.191-203
• /
• 2008

According to a characteristic analysis of traffic accidents of industrial vehicles (RTSA 2007), the occurrence rate and lethality per 10,000 vehicles is 6.7 times higher and 5.3 times higher than that of non-industrial vehicles respectively. For the recent 10 years, in contrast to the 1.5% decrease of the annual rate of entire traffic accidents, the accident rate of industrial vehicles have been increasing 2.0% on the annual average. For the recent 10 years, the accidents of a freight truck and bus have been steadily falling off. But, in the case of a taxi, it has constantly been rising 5.6%. In these situations, the countermeasures to decrease the accident rate are suggested by grasping the inclination of taxi drivers through Q analysis which is character and psychology analysis method.

• Journal of Korean Society of Transportation
• /
• v.24 no.3 s.89
• /
• pp.51-61
• /
• 2006

Interchanges are passages for vehicle and pedestrians and a gateway to nearby facilities, and a place to stay of vehicle and Pedestrians. Interchange traffic must be able to navigate well for safety and convenience. Traffic safety and efficiency are influenced by the interchange. In this study, relative delays of vehicles are compared by changing traffic interchanges. the volume of traffic, the number of lanes, the rate of left turns vehicle on the interchanges of urban arterial roads. The object of this study is to compare Grade crossing interchange, Diamond interchange. Roundabout interchange. SPUI(Single Point Urban Interchange), Echelon interchange). Echelon interchange. By VISSIM Simulation, this study drew the relative delay value of every scenario and compared the delay value of each vehicle considering construction expenses. Through this comparison study, ideal interchange is dependent on the volume of traffic, the number of lanes, and the rate of left turns.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.343-346
• /
• 2005

In this paper a power conditioning system suitable for the fuel cell powered off-road vehicle is proposed. The proposed system employs a Proton Exchange Membrane Fuel Cell stack combined with boost converter, a super capacitor module combined with hi-directional buck-boost converter, a 4-quadrant DC chopper and a permanent magnet DC motor. The momentary overload condition occurring during the motor starting is handled by the energy stored in the supercapacitor module. Also, the regenerative energy can be stored in the supercapacitor module by operating the system in either buck or boost mode. This capability gives the system designer the higher flexibility in designing the system and assures the lower cost of the system. The validity and feasibility of the proposed system is proven by the computer simulation.

• Journal of ILASS-Korea
• /
• v.25 no.4
• /
• pp.178-187
• /
• 2020

The current emission regulations, US Tier-4 and EU Stage-V, are only able to satisfy the regulations when all currently mass-produced emission reduction technologies such as EGR, DOC, DPF, and SCR are applied. Therefore, in this study, for the application of the Urea-SCR system to non-road diesel engines, the database was established by measuring the NO, NO2 concentration and calculating the NO2/NOx ratio based on the catalyst temperature and exhaust mass flow rate. Also, based on the measured NO2/NOx ratio data, a mathematical model was proposed to predict the NO2/NOx ratio at SCR catalyst, and the suitability of the model was verified through steady-state and transient mode. As a result of comparing the NO2/NOx ratio measured at the DOC outlet under the steady-state condition to two model values separately, the R2 was 0.9811 for the 3D map model and 0.9303 for the mathematical model. And in the case of the NO2/NOx ratio measured at the DPF outlet, the R2 was 0.9797 for the 3D map model and 0.935 for the mathematical model. It was confirmed that the R2 with the model value of the 3D Map of the mathematical model in the transient mode is 0.957, which shows high reliability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.551-557
• /
• 2014

This paper presents a robust lateral controller for autonomous guidance of a farm tractor in field operations. Although mechanical steering actuators have recently been used for passenger vehicles, the steering actuator of the farm tractor is based on a hydraulic system, resulting in limited bandwidth and a larger time delay. Based on a kinematic tractor model with steering actuator dynamics, a nonlinear control technique called dynamic surface control is applied to design a robust lateral controller that compensates for uncertainty owing to steering actuator and road geometry. Finally, tracking performance and robustness of the proposed controller are validated via commercial tractor simulations, with respect to the time delay of the steering actuator and road geometry (e.g., up and down hills), on a given field with a constant friction coefficient.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.235-244
• /
• 2005

A new type qf demonstrations in the temporal and spacial aspects, such as accidental and unprepared demonstration, urgent assembly, demonstration-on-sea, demonstration-on-highway, and etc., which are not intended in the Law of Assembly and Demonstration, are becoming a social problem Especially, the law on demonstration-on-sea needs to be discussed further because it is not clear if the Law of Assembly and Demonstration is applicable here. If so, how can it be explained logically? Or, if not so, which law should be applied to this context? So far, various theories on demonstration-on-sea have been opposed aggressively vs. submissively. However, it should be guaranteed that the demonstration on sea is one of the constitutional rights based on the self-decision right of demonstration's place. Accordingly, these contents have to be interpreted with a concept of demonstration in Demonstration's law in coordination with the Constitution. Therefore, it is not persuasive that Demonstration's law is analogized, or general police law is applied, to such untypical demonstrations. In addition, taking into consideration a demonstrative function for minority under modem situation of demonstration, it is right to apply the Law of Assembly and Demonstration to the demonstration-upon-sea directly.