• The Journal of the Korea Contents Association
• /
• v.14 no.7
• /
• pp.511-517
• /
• 2014

The superstructure type of the railway bridge in our country, is mainly classified into the box girder and the I-type girder. The box girder is widely used in the high speed railway bridge because of the safety due to dynamic behavior. The I-type girder is used in the conventional railway bridge, and is also divided into the general type and the composite type, and the newly modified types have been developed. According to the current railway bridge design code, the girder design by the span length in various railway bridge types are performed in this study. The suitable girder height by the span length are analyzed, and the comparative analysis of the structural efficiency and the economical efficiency is carried out. From this study, the composite type girder is appeared the good result in respect of the structural efficiency. However, in the economical aspect, the general I-type girder is required less cost than the other types.

• Journal of the Korean association of regional geographers
• /
• v.21 no.1
• /
• pp.153-175
• /
• 2015

This study is to analyse Korean map inserted in the "Gwandong Gwanseo-jido(關東 關西地圖)" which is reserved in the Gyujanggak Archives as the mother edition of Korean Map("朝鮮圖") in Kangxi Atlas made in Qing dynasty. Map in Gyujanggak is very similar to the Korean map in the Kangxi atlas in terms of shape of southern part of Korean peninsula, boundary of provinces. Especially over 80% of place names on two maps are coincident and over 90% of islands names are identical. It is revealed that map in the Gyujanggak Archive is the most similar map to the Kangxi Atlas in Korea. This map was produced in 1729~1736 which is late compared to the Kangxi Atlas. This difference of production period shows that mother editon of map in Gyujanggak is the base map of Korean Map in Kangxi atlas. The similarity and differences between those maps show the process of edition of geography in the produce the Kangxi atlas. And map in Gyujanggak shows that production of new type of Korean whole map was began in the late $17^{th}$ century.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.471-476
• /
• 2008

The superstructure type of the railway bridge in our country, is mainly classified into the box girder and the I-type girder. The box girder is widely used in the high speed railway bridge because of the safety due to dynamic behavior. The I-type girder is used in the conventional railway bridge, and is also divided into the general type and the composite type, and the newly modified types have been developed. According to the current railway bridge design code, the girder design by the span length in various types of railway bridge is performed in is study. The suitable girder height and the construction cost by the span length are analyzed, and the comparative analysis of the structural efficiency and the economical efficiency is carried out. From this study, the composite type girder is appeared the good result in respect of the structural efficiency. However, in the economical aspect, the general I-type girder is required less cost than the other types.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2017

In the Korea, 80 percent of livestock manure were converted into compost and used as organic fertilizers. The livestock manure compost has two types of powder and pellet type (ID= 5~10 mm). The aim of this study was to investigate the properties of two types of cow manure compost pellet (cylinder and sphere type). Nitrogen concentrations of cylinder type and sphere type of compost pellets were 1.23 and 1.24%, respectively. There were similar with nitrogen concentration of cylinder and sphere types of compost pellets. As a result of analyzing the effect of granulation processing, it was found that the moisture content of the raw material was the most influential factor in the granulation processing in both of the processing types of the screw pressing method and the rotating cylinder method. When the cylinder and sphere types of compost pellets were dry to 20% of moisture content, the specific gravities of these compost pellets were 1.38 and 1.13, respectively. The compressive strength of cylinder type pellet and sphere type pellet were 27.6 and $11.3kg/cm^2$, respectively.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.287-300
• /
• 2018

The aim of this study was to compare the morphological characteristics of two types of stainless steel permanent molar crowns using three-dimensional scanners and the morphological changes of these crowns after crimping. Two types of stainless steel permanent molar crowns, PO-96 and PERMACROWN were scanned using three-dimensional scanner. Crown size, crown index (ratio of buccolingual diameter to mesiodistal diameter at height of contour), cervical convergency of crown were measured. Stainless steel crowns were crimped and re-scanned with three-dimensional scanner. Morphological changes of stainless steel permanent molar crowns were analyzed. As for the crown index, maxillary PERMACROWN was larger buccolingually and smaller mesiodistally than maxillary PO-96 and mandibular PERMACROWN was smaller buccolingually and larger mesiodistally than mandibular PO-96. Maxillary PO-96 was more convergent to cervical mesiodistally than maxillary PERMACROWN and mandibular PO-96 was more convergent to the cervical mesiodistally, buccolingually than mandibular PERMACROWN. Both types of stainless steel permanent molar crowns showed reduction of cervical circumference after crimping. Two products were morphologically different in crown size, shape and cervical convergence. Although both types of stainless steel permanent molar crowns are pre-contoured type, additional crimping is needed to achieve better marginal adaptation.

• Korean Journal of Environment and Ecology
• /
• v.30 no.1
• /
• pp.39-47
• /
• 2016

Recently, it has been reported that morphologically and genetically different two Siberian roe deer (Capreolus pygargus, Pallas, 1771), in Mainland and in Jeju island. Until now, this roe deer has not been clearly taxonomy of Siberian roe deer in Korean peninsula. So, the aim of this study was to compare the skull morphometrics of mainland and Jeju roe deer to obtain more information on the species status of C. pygargus and study the distribution of roe deer subspecies in this region. A total of 50 skulls of adult roe deer was compared and analyzed. The maximum skull length, condylo-basal length, basilar length, maximum skull width, cheek-bone width, interorbital width, rostrum length, length of upper tooth row from the Siberian roe deer in Jeju island were significantly smaller than those of the deer in mainland. Length of the skull was the principal factor of interpopulational variability in roe deer. Variation was not distributed along latitude, longitude, or elevation, but those factors did influence the variation through effects on primary production, which in turn caused isolated differences in skull morphology apparently related to types of forage selected by roe deer in various geographic areas. According to the analysis results of the skull characters, Mainland roe deer was more similar to C. p. tianschanicus which is a subspecies of Siberian roe deer. In addition, Jeju roe deer showed distinct differences compared to European roe deer, 3 subspecies of Siberian roe deer, so it appeared that they could be a unique native species inhabited only in Jeju Island. Because Siberian roe deer in Jeju Island can be classified at subspecies level in this study.

• Conservation Science in Museum
• /
• v.20
• /
• pp.31-48
• /
• 2018

The Geumganasa Temple site two Ridege-end tiles at the Buyeo National Museum(The Buyeo2150-1 and 2150-2, hereinafter referred to as 2150-1 and 2150-2) were excavated the Geumgangsa Temple site. They provide important materials for investigating the shapes and production techniques of the ridge-end tiles of the time since their lower portions remain relatively intact. This study is intended to examine whether the two ridge-end tiles were identical. Conservation treatment, including removal of foreign substances, was conducted in preparation for observation with the naked eye to compare the formal features and production techniques of the two examples. The study revealed that these ridge-end tiles shared formal features such as surface color, clay composition, shape, size, and decoration; however, they differed in terms of production technique. The 2150-1 tile was made by assembling a separately-made body and wing and has no hole through the back, while the 2150-2 tile had its body and wing made as a single unit using long clay plates and features circular holes in the back. It was revealed that one portion of the body of both tiles was intentionally tilted during the production process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.731-736
• /
• 2004

강우-유출과정의 수문학적 현상을 보다 정확히 분석하고 예측하는 기법으로 강우에 의한 유출의 반응을 나타내는 지체시간, 도달시간 등 수문학적 반응시간을 유역의 지형형태학적 인자들과 연계하는 방법이 많이 이용되고 있다. 이에 본 연구에서는 Clark방법과 지형형태학적 순간단위도(GIUH)를 이용하여 계측유역의 강우-유출반응을 모의하였고, 이를 관측된 값과 비교하여 미계측유역의 적용성 여부를 검토해보았다. 대상 유역의 하상지형인자 및 지형형태학적 특성은 Arc-View를 이용하여 구하였으며, 이를 기존의 문헌자료와 비교해보았다. Clark방법의 매개변수의 결정에 있어서 시간-면적곡선은 HEC-1의 무차원 식을 이용하였고, 도달시간은 Kirpich 공식을 이용하여 구하였으며, 저류상수는 Clark방법에 의해 추정된 순간단위도의 첨두유량이 Horton의 차수비의 함수로 구한 철두유량과 같아지는 값으로 결정하였다. 본 연구는 전적비교를 출구점으로하는 유역면적 $8.5km^2$인 설마천을 대상유역으로 하였으며, 모의된 강우-유출반응과 비교하기 위해 사용된 강우사상은 2002년의 8월 4일과 2002년 10월 6일의 10분 단위 우량이다. Clark방법과 GIUH를 이용하여 모의한 유출곡선과 관측된 유출곡선을 비교해본 결과 첨두유량은 8월의 강우사상 때는 $21\%$크게, 10월의 강우사상 때는 $35\%$작게 나타났다. 첨두시간은 모의된 경우가 각각 10분, 20분 빨리 도달하였다. 또한 이러한 결과는 유역의 도달시긴에 가장 민감하게 반응함을 알 수 있었다. 따라서, 유역의 도달시간 산정에 주의를 요한다면 프랙탈 차원이 유사한 미계측유역의 수문곡선 산정에 있어서 Clark방법과 GIUH를 이용하는 방법도 유용하다고 사료된다. 주는 각 수문인자 중 강우시간분포와 유효우량 산정방법 그리고 유출모형에 대해 자자 검토하였으며, 최종적으로 면적에 따른 임계지속기간과 유출량의 변화를 검토해 보았다.이를 각각의 경우의 해석해 결과와 비교${\cdot}$분석하였다. 후방추적 퍼프모형은 전방추적 퍼프모형에 비하여 사용된 퍼프수와 관계없이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유아기에 심근경색 및 허혈성 심근증 또는 선천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2002.05b
• /
• pp.323-324
• /
• 2002

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.779-813
• /
• 1992