• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.105-105
• /
• 2020

전 세계적으로 기후변화에 따른 기온상승 및 강수량 증가, 호우일수 증가 등 이상기후로 인해 다양한 형태의 자연재해가 발생하고 있으며, 이로 인해 우리나라에서도 폭우, 풍랑, 가뭄, 대설 등으로 인한 자연재해 발생이 증가하고 있다. 특히 우리나라는 연평균 강수량 1,300mm의 대부분의 강우가 하절기인 6 ~ 9월에 태풍 및 집중호우를 동반하여 발생하기 때문에 연강수량의 60%이상이 여름철에 집중된다. 이러한 여름철에 집중된 강우로 인해 홍수 및 범람 피해가 여름철에 급증하고 있으며, 2차 피해인 산사태 및 토석류 피해 또한 급증하고 있는 추세이다. 토석류는 집중호우 시 자연산지의 취약한 사면이 붕괴되어 유출수와 함께 급경사의 계류로 붕괴된 토석이 유출되면서 토석류로 전이 및 발전하여 계류하부의 주택 및 농경지를 매몰하여 피해를 발생시킨다. 특히 토석류는 유출수와 함께 토석이 급경사의 계류를 따라 빠른 속도로 이동하고 퇴적 시작점에서 높이의 6배까지 이동하여 인명피해 등 큰 피해를 발생시키는 특성이 있다. 이러한 토석류 피해로 인한 피해와 손실을 최소화하기 위해서는 토석류 발생 시 피해 규모를 예측하여야하며, 또한 하부 구조물의 손실을 정량적으로 해석하여 방재정책의 우선순위를 수립하여야 한다. 따라서 본 논문에서는 강우로 인한 토석류 발생시 하부 구조물의 손실을 정량적으로 해석하기 위하여 토사재해 손실·손상함수를 개발하여, 함수를 탑재한 토사재해 피해액 산정모형인 DELET(DEbris flow Loss Estimation Tool) 모형을 개발하였다. DELET를 이용하여 실제 토석류 피해가 발생한 피해지역에 적용하여 토사재해 피해 구조물의 손실을 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.262-262
• /
• 2022

토석류는 산지 사면에서 발생하여 지형변화에 큰 영향을 미치는 대표적인 자연재해 중 하나로 국내에서 발생하는 토석류는 홍수, 태풍 등 타 재해에 비하여 상대적으로 매우 짧은 시간에 발생하며, 사후대응이 어려우므로 사전대비가 필수적이다. 토석류로 인한 피해를 효과적으로 대비하기 위해서는 국내의 지질, 지형 그리고 강우에 따라 발생하는 토석류에 대한 보다 체계적인 정밀현장조사를 통한 자료 구축과 이를 분석한 토석류의 발생원인, 이동경로와 침식 및 퇴적에 관한 연구가 필요하다. 최근의 토석류 연구에서는 침식-퇴적 및 연행작용에 의한 효과를 반영한 수치모의 연구들이 있으나, 모형의 검증을 위한 침식-퇴적 거동에 대한 자료는 현재까지 매우 부족한 실정이다. 토석류 발생에 따른 침식-퇴적 거동특성은 그 자체로도 공학적으로 중요한 요소이며, 수치해석 모의에 필요한 매개변수 추정에도 필요한 항목이다. 토석류 모의의 검증자료로 활용될 수 있는 토석류에 대한 실험적 연구는 토석류의 확산 형태 및 확산 길이에 대한 내용이 대부분으로 흐름수로에서의 침식 및 퇴적에 대한 연구는 찾아보기 어려운 상태이다. 본 연구에서는 토석류 발생에 따른 흐름부에서의 침식 및 퇴적에 대한 거동 특성을 분석하기 위하여 함수비, 흐름수로 경사, 상부 붕괴토조의 토사깊이, 흐름수로 침식가능 깊이 등 다양한 조건으로 실내모형실험을 수행하였다. 상부 토조의 토사 함수비가 30~80% 실험에서는 퇴적 현상이 탁월하였고, 100% 이상인 실험에서는 침식 현상이 확연하게 나타나 토사의 함수비가 높아지면 집중호우 등 선행강우로 인한 산지 지역에서 발생되는 토석류 현상과 유사하고, 함수비가 낮으면 토석류(Debris flow)가 아닌 입상유동(Granular flow)으로 보는 것이 적절한 것으로 판단된다. 상부 토조의 함수비를 100% 이상으로 변화하여 침식이 발생한 실험에서 상부 토조의 액화 된 토사는 빠른 속도로 흐름이 진행되면서 함수비와 붕괴 체적이 증가할수록 흐름수로 상류부에 침식이 크게 나타나고, 상류부의 토사를 중류부를 거쳐 하류부까지 연행(Entrainment)하는 것으로 판단된다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.125-139
• /
• 1999

It is difficult to evaluate the shear strength of weathered residual soils because of the difficulties of undisturbed sampling. In this study, a sampling device, direct shear box with shoe, was developed in order to get undisturbed samples easily for direct shear tests, and undisturbed samples could be successfully obtained. Through direct shear tests on undisturbed samples, the shear strength was evaluated with the variation of saturated conditions. In order to consider the effect of disturbance on the shear strength, a static compaction device was developed, and then it was found that undisturbed samples show greater shear strengths than the disturbed ones under natural water contents and similar strengths to the ones under soaked conditions. Further, the shear strength evaluated from direct shear tests was compared with the result of triaxial tests on undisturbed samples, and soaked strengths of the former were similar to the latter. As the result of stability analyses on an actual failed slope, it was found that the shear strength can be evaluated reasonably using direct shear box with shoe.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.233-240
• /
• 2019

The aim of this study was to provide basic data that could identify and help prevent a slow-moving landslide using an analysis of the relationship between below-ground characteristics and water from three slow-moving landslide areas in Pohang, Gyeongsangbuk-do, South Korea. Surface surveys, resistivity, seismic exploration, well logging, and boring surveys were conducted in the three areas. The main direction of discontinuous surface was matched with the slope direction of the three landslides. The results indicatedthat slow-moving landslides might occur in the direction of the slope. Underground water was distributed within the crush zones within the three landslide areas and flowed along the tensile cracks. There was a significant difference (p<0.01) between the mean angle of the tensile cracks and that of the underground waterflow (p=0.8019). These results indicated that the progress of a slow-moving landslide can be forecast by monitoring the location and flow of underground water within a known slow-moving landslide area.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.67-74
• /
• 2023

In order to monitor the stability of slopes, research on data-based slope failure prediction and early warning is increasing. However, most papers overlook the quality of data. Poor data quality can cause problems such as false alarms. Therefore, this paper proposes a two-step hybrid approach consisting of rules and machine learning models for quality control of data collected from slopes. The rule-based has the advantage of high accuracy and intuitive interpretation, and the machine learning model has the advantage of being able to derive patterns that cannot be explicitly expressed. The hybrid approach was able to take both of these advantages. Through a case study, the performance of using the two methods alone and the case of using the hybrid approach was compared, and the hybrid method was judged to have high performance. Therefore, it is judged that using a hybrid method is more appropriate than using the two methods alone for data quality control.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.326-331
• /
• 2008

This study was carried out to analyze the characteristics of each factors by using the quantification theory(I) for prediction of landslide hazard area. The results obtained from this study were summarized as follows; The stepwise regression analysis between landslide sediment ($m^3$ ) and environmental factors, factors affecting landslide sediment ($m^3$ ) were high in order of mixed (forest type), < 15 cm(soil depth), 801~1,200 m (altitude), $31{\sim}40^{\circ}$ (slope gradient), 46 cm < (soil depth), 1,201 m < (altitude) and s(aspect). According to the range, it was shown in order of soil depth (0.3784), altitude (0.2876), forest type (0.2409), slope gradient (0.1728) and aspect (0.1681). The prediction of landslide hazard area was estimated by score table of each category. The extent of prediction score was 0 to 1.2478, and middle score was 0.6239. Class I was over 1.1720, class II was 0.7543 to 0.1719, class III was 0.4989 to 0.7542 and class IV was below 0.4988.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.101-109
• /
• 2022

This study describes the results of model experiment to analyze the effect of backfill material types on the behavior of underground facility. In the model experiment, backfill materials around the existing underground facility were applied with soil (Jumunjin standard sand) and CLSM. The displacement of underground facility was analyzed for each excavation stage considering the separation distance between the excavation surface and the backfill area based on the experimental results. When soil was applied as a backfill material, the soil on the back of the excavation surface collapsed by excavation and formed an angle of repose, and the process of slope stability was repeated at each excavation stage. In addition, the displacement of underground facility began to occur in the excavation stage that the failure line of soil passes the installation location of the underground facility. When CLSM was applied as a backfill material, there was almost no horizontal and vertical displacement of the ground regardless of the separation distance from the excavation surface even when excavation proceeded to the backfill depth. Therefore, this result showed that it can have a resistance effect against the lateral earth pressure generated and the collapse of the original ground by adjacent excavation, if a backfill material with high stiffness such as CLSM is applied.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.1
• /
• pp.37-47
• /
• 2014

Unsaturated hydraulic conductivity (HC) is integrated theoretically from soil water retention curves (SWRC) by Mualem capillary model, but the prediction of HC is extremely sensitive to small variation of matric suction near saturation. Near saturation, the Mualem HC based on smooth SWRC decreases abruptly and has problems in the reliability of hydraulic behavior and the stability of numerical solutions. To improve van Genuchten-Mualem (VGM) HC, the van Genuchten SWRC model is modified within range of low matric suction (arbitrary air entry pressure). At an arbitrary air entry pressure, the VG SWRC is linearized in log scale until full saturation. The modified VG SWRC does not affect the fit of actual retention behavior and either the parameters of original VG SWRC fit. Using the modified VG SWRC, the VGM HC is modified to integrate for each interval decomposed by arbitrary air entry pressure. An analytical solution on modified VGM HC is proposed each interval, to protect the rapid change in HC near saturation. For silty soils, VGM models of HC function underestimate the unsaturated permeability characteristics and especially show rapid reduction near saturation. The modified VGM model predicts more accurate HC functions for Korean weathered soils. Furthermore, near saturation, the saturated HC is conserved by the modified VGM model. After 2-D infiltration analysis of an actual slope, the hydraulic behaviors are compared for VGM and the modified models. The prediction by the proposed model conserved the convergence of solutions on various rainfall conditions. However, the solution by VGM model did not converge since the conductivity near saturation reduced abruptly for heavy rainfall condition. Using VGM model, the factor of safety is overestimated in both initial and final stage during heavy rainfall. Stability analysis based on infiltration analysis could simulate the actual slope failure by the proposed model on HC.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.135-145
• /
• 2019

The slope collapse can be classified into internal and external factors. Internal factors are engineering factors inherent in the formation of slopes such as soil depth, slope angle, shear strength of soil, and external factors are external loading such as earthquakes. The external factor for earthquake can be expressed by various values such as peak ground acceleration (PGA), peak ground velocity (PGV), Arias coefficient (I), natural period (T_p), and spectral acceleration (S_aT=1.0). Specially, PGA is the most typical value that defines the magnitude of the ground motion of an earthquake. However, it is not enough to consider the displacement in the slope which depends on the duration of the earthquake even if the vibration has the same peak ground acceleration. In this study, numerical analysis of two-dimensional plane strain conditions was performed on engineered block, and slope responses due to seismic motion of scaling PGA to 0.2 g various event scenarios was analyzed. As a result, the response of slope is different depending on the presence or absence of sliding block; it is shown that slope response depend on the seismic wave triggering sliding block than the input motion factors.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.6
• /
• pp.5-21
• /
• 2014

It has been pointed out that the collapses of unsaturated road embankments caused by earthquake are attributed to high water content caused by the seepage of the underground water and/or the rainfall infiltration. Hence, it is important to study influences of water content on the dynamic stability and deformation mode of unsaturated road embankments for development of a proper design scheme including an effective reinforcement to prevent severe damage. This study demonstrates dynamic centrifugal model tests with different water contents to investigate the effect of water content on deformation and failure behaviors of unsaturated road embankments. Based on the measurement of displacement, the pore water pressure and the acceleration during dynamic loading, dynamic behavior of the unsaturated road embankments with about optimum water content and the higher water content than the optimum one have been examined. In addition, an image analysis has revealed the displacement field and the distributions of strains in the road embankment, by which deformation mode of the road embankment with higher water content has been clarified. It has been confirmed that in the case of higher water content the settlement of the crown is large mainly owing to the volume compression underneath the crown, while the small confining pressure at the toe and near the slope surface induces large shear deformation with volume expansion.