• Journal of Digital Convergence
• /
• v.18 no.6
• /
• pp.279-285
• /
• 2020

In the era of the Fourth Industrial Revolution, there are many sensors around. People and things are connected to these sensors to the internet. Numerous connected sensors produce the latest data in seconds, and these data are stacked with big data of unimaginable size. Because personal information can be contained in any place of data produced, device and system protection are needed. Digital twins are virtual models that accurately reflect the status information of physical assets and systems that utilize them. The characteristic of digital twin is that digital twin itself has temporal and structural identity enough to represent the object of reality. In the virtual environment the reproduced reality, it continuously simulates and it virtuals of the point of time or the future, the replica can be created. Therefore, this study cited factors threatening personal information in the era of the Fourth Industrial Revolution. And proposed using digital twin technology that can simulate in real-time to overcome the risk of personal information hacking.

• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2002

21C, Multiplex Cinema Theater is made from movie industry developed and become a place where we can spend our free time and consuming. But, theater users, who are many and unspecified persons, are short of information on the Multiplex Cinema Theater, so that they may be injured or killed at the occurrence of fire accident. Particularly, Multiplex Cinema Theater is a place that underground space or top floor in highrise building had many people in theaters. However, this problem is difficult to solve that to protect human being and properties at the occurrence of fire accident in the Multiplex Cinema Theater, In order to overcome such problems, Multiplex Cinema Theater need fire protection solutions facilities concerning particulars to pay attention to the safety on a fire and evacuation. This study analysed Multiplex Cinema Theater concept and computer simulation for risk point.

• Journal of Advanced Navigation Technology
• /
• v.11 no.1
• /
• pp.17-23
• /
• 2007

This paper, describes the VDR physical layer design in VDL Mode-2 in order to meet the requirements of International standards. VDR's frequency band is 117.975~137MHz, and CSMA(Carrier Sense Multiple Access), D8PSK(Differential Eight Phase Shift Keyed), 25KHz's channel bandwidth use. The analysis of the isolated channel from near channels, sensitivity of the receiver, dynamic range of the receiver, linear of the transmitter and energy of spurious for linear and non-linear simulation as a requirement condition of performance of VDR and teaches the course of design. The transmitting power level should be lower than 5dB from Po1dB point and the selected IF frequency is 45MHz to suppress the spurious signals. The receiver designed has 4.5dB of Noise figure, 27.52dB of Es/No, Mixer isolation up to 30dB, IIP3 power of LNA up to +10dBm to minimize the intermodulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.45-52
• /
• 2005

This paper is studied on boost AC-DC converter of high power factor and high efficiency for discontinuous current control. The converter operated in discontinuous current control eliminates the complicated circuit control requirement, and reduces a number of components. The input current waveform in proposed circuit is got to be a discontinuous sinusoidal form in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, the input power factor is nearly unity and the control circuit is simple. Also the switching devices in a proposed circuit are operated with soft switching by the partial resonant method. The result is that the switching loss is very low and the efficiency of system is high. The partial resonant circuit makes use of a inductor using step up and loss-less snubber capacitor. The circuit topology of the converter is simplified. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1643-1646
• /
• 2003

Drawing is a mechanical operation that attenuates thick material to an appropriate thickness for the next processing or end usage. When the input material has the form of a bundle or bundles made of very thin and long shaped wire or fibers, this attenuation operation is called "bundle drawing" or "drafting" Drafting is being used widely in manufacturing staple yarns. which is indispensable for the textile industry. However, the bundle processed by this operation undertake more or less defects in the evenness of linear density. Such irregularities cause many problems not only for the product quality but also for the efficiency of the next successive processes. Since long there have been many researches tying to find out factors affecting the irregularity of linear desity, to obtain optimal drafting conditions, to develop efficient measuring and analysis methods of linear density of bundle, etc., but there exists yet no fundamental equation describing the dynamic behavior of the flowing bundle during processing. In this research a mathematical model for the dynamic behavior of the bundle fluid is to be set up on the basis of general physical lows representing physical variables, i.e. linear density and velocity as the dynamic state of bundle. The conservation of mass and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. On the basis of the simplified model, the simulation was performed and the results could be confirmed by the experiments under various conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.7
• /
• pp.613-619
• /
• 2015

In this paper, we proposed a paper-based pattern-switchable antenna using inkjet-printing technology. The proposed antenna is composed of two bow-tie antennas and a switching network. The bow-tie antennas are inkjet-printed on paper using a low cost home printer. The switching network is built on a printed-circuit-board(PCB) and consists of a single-pole-double-throw(SPDT) switch and balun element. A double-sided parallel-strip line(DSPSL) can convert the unbalanced microstrip mode to the balanced strip mode. Two bow-tie antennas have different radiation patterns because of the different orientation of the reflectors. It is demonstrated from EM simulation and measurement that the radiation patterns of the proposed antenna are successfully switched by the SPDT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.992-998
• /
• 2017

For local advertising based on D2D communications, sources want advertisement messages to be diffused to unspecified users as many as possible. It is one of challenging issues to select target-areas for advertising if users are uniformly distributed. In this paper, we propose D2D based advertisement dissemination algorithm using user clustering with expectation-maximization. The user distribution of each cluster can be estimated by principal components (PCs) obtained from each cluster. That is, PCs enable the target-areas and routing paths to be properly determined according to the user distribution. Consequently, advertisement messages are able to be disseminated to many users. We evaluate performances of our proposed algorithm with respect to coverage probability and average reception number per user.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2319-2324
• /
• 2012

In this paper, the design of asymmetric branch line couplers using artificial dielectric substrate (ADS) is described. The effective permittivity and permeability increase in ADS because of the lots of the inserted via-holes. So the physical length and width of transmission lines realized on ADS are reduced compared to the standard lines. This enables one to design size-reduced microwave circuits. As an instance in this work, an asymmetric branch line coupler with the ratio of 3:1 is designed at 2GHz. The designed coupler has a small size of 53.4% compared to the normal circuit while the same performances are preserved. A good agreement between the simulated and measured asymmetric power dividing ratio is shown. The measured loss is only less than 0.2dB, which is a very small value.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.495-501
• /
• 2014

Users of passenger ships and cruise ships are rapidly increasing year by year, and the needs of the floating architecture are newly come out. But the studies about the passengers' safety and the countermeasures against incidents on board the ships are rare, although the ships' incidents are occurred averagely 15 cases per year during last 10 years. For the purposes of the analysis of the safety consciousness and gathering the some of input data for evacuation simulation for Korean passengers on board ships, this study performed surveys targeting ordinary 394 passengers who are not specially trained and/or accustomed with onboard living conditions. The results are the followings. The reliability on ships' safety is surveyed as 32.3%. Only 14.6% of respondents are aware that there were safety education on board ship during sailing. And 42.2% and 40.9% of respondents answered that they saw the map of emergency routes and knew where the life boats are, respectively. And 73.3% select crews' direct or in-direct(like announcement by indoor broadcasting system) guidances as the most effective evacuation method.