• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.51-56
• /
• 2001

공작기계로 금속을 절삭할 때 공작기계의 불안정, 즉 자려진동의 발생은 절삭과정과 공작기계구조 두 요소의 동적 거동에 기인한다. 공작기계의 채터와 구조의 동적인 거동은 모든 금속가공에서 가공물의 표면조도와 공구수명, 공작기계의 수명에 큰 영향을 미친다. 이와 같은 채터와 동적인 거동을 해석함으로써 최적의 절삭 조건을 결정할 수 있으나, 이러한 연구에서 가장 어려운 점은 기계구조와 절삭과정이 폐회를 구성하고 있기 때문이다.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.13-19
• /
• 1985

Servo의 안정성: Servo는 정상상태, 과도상태의 특성을 문제삼기에 앞서 먼저 안정하지 않으면 안된다. 제어량과 제어편차와 같이 제어 loop 속의 신호가 일정치에 수검하지 않는 현상을 불안정이라 한다. 제어량의 feedback을 정(positive)으로 하며 일반 목표치에는 수검하지 않고 제어편차는 단조롭게 정, 또는 부(negative)의 방향으로 발산한다. 이것은 접속 잘못에 의한 이상현상에 속한다. 이것에 대해서, 부 feeeback으로 하여도 제어 량이 목표치에 수검하지 않고 지속적으로 진동하는 불안현상도 있다. 이들은 선형발진과 비선형발진으로 구분할 수 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.89-94
• /
• 2010

Fuselage propellant feeding system should supply propellants to engine with required flow rate, temperature and pressure. Propellant vibration in engine and feeding line changes feeding characteristics, and frequently inhibits to satisfy the required feeding requirements. Sloshing and POGO vibration are known to be the major vibration phenomena. Concerning sloshing and POGO, vehicle control and structural dynamics aspects are extensively studied, whereas, its effect on propellant feeding performance is not clearly understood. This paper focuses on the deviation of required feeding performance due to propellant vibration. Overall characteristics of propellant vibration and its effect on propellant supply to engine are reviewed and control mechanism for suppressing vibration is introduced.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.8
• /
• pp.322-330
• /
• 2001

The stability and the leakage performance of turbo pump unit seals supported by elastic-ring ball bearings are Investigated for the Improvement of onset speed of instability(OSI). The numerical analysis of floating ring seal in consistence with its geometry and operating conditions is executed with detailed comparison of various seal types. The results show that the floating ring seal has superior performance in terms of rotordynamic salability compared to the ocher type seals while it shows slightly inferior leakage performance. To Improve the leakage performance. floating ring seal could be combined with hole Pattern damper or labyrinth seal surface.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.865-868
• /
• 2006

In this paper, a dynamic behavior(natural frequency) of a cracked simply supported pipe conveying fluid is presented. In addition, an analysis of the flutter and buckling instability of a cracked pipe conveying fluid due to the coupled mode (modes combined) is presented. Based on the Euler-Bernouli beam theory, the equation of motion can be constructed by using the Lagrange's equation. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. The stiffness of the spring depends on the crack severity and the geometry of the cracked section. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations. This study will contribute to the safety test and stability estimation of structures of a cracked pipe conveying fluid.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.215-218
• /
• 2007

In this paper a dynamic behavior(natural frequency) of a cracked cantilever beam subjected to follower force is presented. In addition, an analysis of the flutter and buckling instability of a cracked cantilever beam subjected to a follower compressive load is presented. Based on the Euler-Bernouli beam theory, the equation of motion can be constructed by using the Lagrange's equation. The vibration analysis on such cracked beam is conducted to identify the critical follower force for flutter insstability based on the variation of the first two resonant frequencies of the beam. Besides, the effect of the crack's intensity and location on the flutter follower force is studied. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1206-1212
• /
• 2012

The brake squeal propensity due to the friction-velocity curve is numerically investigated. The finite element models for the disc and pad are correlated with the modal test. In the friction-engaged system modeling, the friction function is linearized at the equilibrium. The damping term induced by friction-velocity slope is incorporated into the equations of motion. In the complex eigenvalue analysis, it is found that the pad shear mode is very sensitive to the friction curve. The results shows that the squeal propensity of the pad shear mode can be controlled by the design parameters such as pressure and stiffness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.187-193
• /
• 1998

In the tandom pencil slat saw lines, feeding of cedar blocks is often stopped because excessive motor current is required in a saw machine. These events are called "kickoffs' in factory lines. Kickoffs decrease productivity due to machine down-time and damage to saw blades often accompanies them. Researches on saw behavior at kickoff are required to understand and reduce the frequency and severity of kickoff events. This research aims at understanding the fundamental mechanisms of kickoffs during cutting, predicting the impending kickoff and evolving design improvements for high cutting performance with fewer and less severe kickoffs.offs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.24-30
• /
• 1985

An experimental work to predict critical flow velocity to give whirling instability on staggered array tube banks model which is located in wind tunnel is presented. The critical flow velocity was obtained by measuring flow induced tube vibration on three tube array models having different pitch to diameter ratio as changing damping ratio and natural frequency of tube model. The obtained experimental results are directly compared with the numbers of other investigators and partly proved the truth of Blevin's new idea to predict critical flow velocity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.23-29
• /
• 1993

내부공진 (.omega.$_{3}$ = .omega.$_{1}$ + 2.omega.$_{2}$)을 가진 원판 의 조합공진(.OMEGA. = 2.omega.$_{1}$ + .omega.$_{2}$)응답의 안정성 을 해석한 결과 다음과 같은 결론을 얻었다. 1) 모든 진폭이 0(.alpha.$_{1}$=.alpha.$_{2}$=.alpha.$_{3}$=0)인 공진응답 은 매개변수의 값에 관계없이 안정하다. 2) 모든 진폭이 0이 아닌 (.alpha.$_{1}$.neq.0, .alpha.$_{2}$.neq.0, .alpha.$_{3}$.neq.0) 공진응답은 쌍으로 존재하는데 진폭이 큰 응답(upper branch)은 안정하나 진폭이 작은 응답(lower branch)은 불안정하다. 3) 진폭이 0이 아닌 공진응답이 존재하지 않는 경우에는 선형계와 마찬가지 로 모든 진폭이 0이 공진응답(결과적으로 비공진 응답)이 계의 응답을 지배 하지만 모든 진폭이 0이 아닌 공진응답이 존재하는 경우에는 안정한 공진응 답이 2개이므로 초기조건이 실제의 응답을 결정하게 된다.