• Proceedings of the Korea Contents Association Conference
• /
• 2016.05a
• /
• pp.367-368
• /
• 2016

본 연구는 임상에서 사용되어지는 두 가지의 불소 바니쉬를 비교연구 하였다. 또한 각각 치아표면에 10mg의 불소 바니쉬를 도포하였다. 각 대상자들의 타액의 불소이온유리농도는 1,3,12,24시간으로 채취하여 분석하였다. 각각의 불소 바니쉬를 도포한 타액 내 불소이온의 유리 누적량은 차이를 보였다. 본 연구는 현재 사용되어지는 불소 바니쉬를 선택함에 있어 기초자료로 사용될 수 있을 것이라 사료되어진다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.408-419
• /
• 2007

In the child, it is very important that he/she will have the ability to suppress aesthetic restorative materials of secondary caries. With the representative preventive material against caries, the importance of fluoride is more emphasized. This study examined the differences in fluoride release and re-uptake among some restorative materials, following a treatment of APF gel and fluoride varnish. The surface roughness was observed under scanning electron microscope. Studying this will provide for the research to find effective restorative materials and fluoride type in tooth caries prevention. It is applied from presence at a clinic that restorative materials are resin, flowable resin, compomer and glass ionomer. Fluoride release was measured at 24-hour intervals for 7 days, 3-day intervals from 8th to 38th day using an ion-selective electrode and analyzer. Then, the materials were treated with the fluoride gel and fluoride varnish respectively, fluoride release was measured and specimens were evaluated under scanning electron microscope for 4 weeks. It was concluded that 1. Fluoride was released for 38 days from restorative materials under 1 ppm in case of flowable resin, 1-2 ppm in compomer and 2-8 ppm in glass ionomer, a few of fluoride was released after 45 days 2. Fluoride has more releasing after application of APF gel than fluoride varnish. Fluoride re-uptake was observed under 0.6-0.2 ppm in fluoride varnish and 0.6-2.6 ppm in APF gel after starting the procedure one day(p<0.05). For the remaining 4 weeks, they demonstrated a similar release. 3. Specimens were evaluated under scanning electron microscope. Applied fluoride in the experimental group surface was rougher than the control group that did not receive fluoride application. Fluoride varnish group had a smoother surface than both the APF gel group and the varnish APF gel group that received a fluoride application.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.136-143
• /
• 2005

The replacement of dental restorations due to secondary caries is a continuing problem in restorative dentistry. The secondary caries can be partly prevented by using fluoride containing dental materials such as glass ionomer cement, which releases and be recharged with fluoride ion acting as a fluoride reservoir. For the purpose of investigating the behaviors of fluoride release and recharge of conventional and high viscosity glass ionomer cements, the experiment was performed on the seven specimens each from 4 kinds of materials ; 1 kind of conventional glass ionomer cement, 2 kinds of high viscosity glass ionomer cements and 1 kind of composite resin. The amount of fluoride release was measured over 7 days with pH/ion meter and fluoride specific electrode. After measuring daily fluoride release, the specimens were recharged with 2% NaF solutions for 4 minutes and measured for 3 days with recharging repeated two consecutive times. The results were as follows : 1. Significantly more fluoride was released at first day after recharge in all materials except Z-100. 2. High viscosity glass ionomer cements released more or nearly equal amount of fluoride after recharge compared with the initial release(P<0.05). 3. The fluoride release after recharge with 2% NaF solution was in order of Fuji IX, Ketac Fil, Ketac Molar, Z-100.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.25-34
• /
• 2006

Fluoride released from dental restorative materials effectively declines the incidence and activity of dental caries and inhibits tooth demineralization. This study investigated the fluoride release and uptake characteristics of one composite resin $(Z-250^{TM})$ three glass ionomer-based restorative material ($Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$, Fuji IX GP $Fast^{(R)}$) Forty discs(6mm diameter and 1mm height) were prepared for each material. Each disc was immersed in 5ml of distilled water within polyethylene vial and stored at $37^{\circ}C$. The distilled water was changed every 24 hours and the release of fluoride was measured for 31 days. At the end of this period, each specimen was subjected to one of four treatments : (A) no fluoride treatment (control), (B) application of a fluoride dentifrice (500ppm) for three minutes three times; (C) application of the 1.23% acidulated phosphate fluoride(APF) foam for one minute once, (D) the same regimen as (B), plus application of the APF foam for one minute once. Then, all samples were reassessed for an additional 7 days. For all samples, the greatest fluoride release was observed after the first day of the study but diminished with time. On the 7th day of the study, fluoride release level was stabilized. Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ released higher amount of fluoride than other materials ; however, no statistically significant difference was found from Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$. The amount of fluoride of $Dyract^{(R)}$ AP, Fuji II $LC^{(R)}$ and Fuji IX GP $Fast^{(R)}$ was increased after fluoride treatment, and diminished with time.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.311-322
• /
• 2012

Restoration materials used to investigate effects of fluorine such as enamel strengthening and anti-caries effects in several types of dental restoration materials were five kinds including Ionoseal(VOCO GmbH, Cuxhaven, Germany), Fuji Filling LC(GC Co. Tokyo, Japan), Quadrant Universal LC(CAVEX Holland BV, Netherlands), PermaCem$^{(R)}$(DMG, Hamburg, Germany) and Dyract$^{(R)}$ AP(Dentsply GmbH, Germany), and the amount of fluorine-releasing was measured with ICS-5000 Reagent-FreeTM Ion Chromatography(RFICTM, Dionex, U.S.A.). The results of this study are as follows. 1. In all types of restoration materials, the amount of fluoride-releasing was reduced with time passage and it was declined sharply to show significance in four weeks. Fuji Filling LC(12.445PPM) or resin-reinforced glass ionomer and PermaCem$^{(R)}$(16.121PPM) or compomer were found to release fluorine for a long term(P<.001). 2. Ionoseal(0.887PPM) or glass ionomer and Quadrant Universal LC(0.957PPM) or composite resin released a few fluorine of 1PPM or less than 1PPM after one week, and Dyract$^{(R)}$ AP or compomer released fluorine of 8.631PPM in one week and its amount of releasing decreased dramatically in two and four week by recording 0.175PPM and 0.116PPM, respectively. Therefore, the effect of releasing fluorine in four weeks was observed to be poor (P<.001). 3. Fuji Filling LC or resin-reinforced glass ionomer and PermaCem$^{(R)}$ or compomer released fluorine of 33.372 and 1.902PPM, respectively in one week and their amount of releasing increased to be 36.371 and 18.223PPM, respectively in two weeks. So, their amount of fluorine-releasing recorded the highest levels in two weeks(P<.001).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.85-89
• /
• 2000

There has recently been some trials to add the fluoride-releasing property to existing fissure sealants and some of them are already commercially available. But, some questions mat naturally be arisen regarding the potential decrease of physical properties by adding the fluoride despite its new caries-inhibiting abilities. This study was performed for the purpose of comparing the shear bond strengths of conventional composite sealant, Fluoride-releasing sealant and glass ionomer sealant, and obtained the results as fellows. 1. Two kinds of composite sealants (Helioseal and Teethmate-A) showed slightly higher bond strength than Fluoride-releasing sealant(Teethmate-F) without any significance(p>0.05). 2. Class ionomer sealant (Fuji III) was much lower than composite sealant in shear bond strength(p<0.05). 3. With the result of this study, it was found that there is little effect on retentive properties of sealants by adding fluoride to amplify the caries-inhibiting properties.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.429-437
• /
• 2010

The aim of this study was to evaluate the fluoride release and microhardness of Beautifil II as giomer(Group I), F2000 Compomer as compomer(Group II), GC Fuji II LC Capsule as resin-modified glass ionomer(Group III) and $Filtek^{TM}$ Z350 as composite resin(Group IV) according to time. Forty discs(5 mm diameter and 2 mm height) were prepared for each material. Each disc was immersed in 3 ml of de-ionized water within polyethylene tube and stored at $37^{\circ}C$. Evaluations were performed by pH/ISE meter for analysis of fluoride release and hardness testing machine for analysis of microhardness over 31 days. The results can be summarized as follows : 1. For all groups except group IV, the greatest fluoride release was observed after the first day of the study period and then dramatically diminished over time. On the 7th day of the study period, fluoride release level was stabilized. 2. Group III showed the highest fluoride release among test groups and then group II, group I were followed. Significant difference in cumulative fluoride release over 31 days was found between each groups. Group IV showed no fluoride release during study period. 3. Group IV showed the highest microhardness among test groups and then group I, group II, group III were followed. Significant difference in microhardness was found between each group, except between group I and group II. 4. After 31 days, microhardness was slightly diminished in every group. However, no significant difference was found.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.399-407
• /
• 1998

In order to resolve enamel demineralization around orthodontic bracket, fluoride-releasing materials, glass ionomer cements and fluoride-containing resin, were introduced in orthodontic department. There were many studies about their fluoride release, but their results were controversial. The purpose of this study was to clarify the pattern and amounts of fluoride release from glass ionomer cements and a fluoride-containing resin during 70 days in vitro. Disc shaped specimens were prepared and immersed in polyethylene tube containing 2ml distilled deionized water. The daily amounts of the fluoride released from each specimens were measured after experiment 1 day, 3 days, 7 days, 14 days, 42 days and 70 days. They were measured by fluoride-specific electrode combined pH/Ion meter. The following results were as follow, 1. Fluorides released from fluoride-containing resin during 1 day were significantly less than those from glass ionomer cements. 2. On experiment 70 days, mean daily amounts of fluoride released from Miracle-$Mix^{\circledR}$were $3.4{\mu}g/cm^2$, those from Fuji GC $II^{\circledR}$ were $2.7{\mu}g/cm^2$, those from $Orthobond^{\circledR}$ were $2.3{\mu}g/cm^2$, those from Fuji GC $LC^{\circledR}$were $1.4{\mu}g/cm^2$ and those from fluoride-containing resin, $Heliomolar^{\circledR}$, were $0.1{\mu}g/cm^2$. 3. There were no significant differences in daily amounts of fluoride released from between self-curing glass ionomer cements and light-curing glass ionomer cements. Amounts of released fluoride varied among commercially available products. 4. In all experimental materials, amounts of released fluoride decreased rapidly until experimental 3 days and then decreased slowly until 14 days and more slowly until 70 days.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1105-1113
• /
• 2000

Bioglass 조성 중 45S5 (46.1SiO$_2$.24.4$Na_2$O.26.9CaO.2.6P$_2$O$_{5}$ : 몰비)를 기본 조성으로 하여 46P4 (46.2SiO$_2$.49.5CaO.4.3P$_2$O$_{5}$ : 몰비), 46SF (46.1SiO$_2$24.4$Na_2$O.16.1CaO.2.6P$_2$O$_{5}$.10.8CaF : 몰비) 그리고 55SF (55.1SiO$_2$.9.2$Na_2$O.27.8CaO.3.4P$_2$O$_{5}$.4.5CaF : 몰비)를 제조하여 tris-완충용액 및 유사 생체용액(simulated body fluid)에서 반응시킨 후 생체활성유리의 표면에 생성되는 아파타이트 결정형에 관하여 연구하였다. 45S5 유리를 tris-완충용액에 반응시켰을 경우 6시간 반응시부터 수산화 아파타이트가 생성되었으나 유사 생체용액에 반응시켰을 경우에는 24시간까지도 수산화 아파타이트 결정이 생성되지 못하고 비정질 상태의 칼슘 인산염만 형성되었다. tris-완충용액에 각 조성의 유리를 200시간 반응시킨 경우 불소를 함유하지 않은 유리에서는 잎사귀 모양의 수산화 아파타이트가, 불소를 함유한 유리에서는 구상의 플루오르 아파타이트가 형성되었다. 그러나 유사 생체용액에 각 조성의 유리를 200시간 반응시켰을 경우 불소를 함유하지 않은 유리에서는 누에고치형의 수산화 아파타이트가 형성되었고 불소를 함유한 유리에서는 무정형의 칼슘 인산염이 생성되었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.418-425
• /
• 2018

This study was to measure and compare the amount of fluoride, microhardness and solubility of high viscosity glass ionomer and resin-reinforced glass ionomer during 84 days. Fuji IX GP EXTRA, Fuji IX GP, Fuji II LC and Filtek$^{TM}$ Z350XT stored in deionized water for 84 days to measure fluoride release, microhardness and solubility. As a result of measurement of fluoride release, all the glass ionomers showed the highest amount of fluoride release on day 1 and gradually decreased. Fuji IX GP EXTRA showed the highest amount of fluoride release and cumulative release. And Fuji IX GP and Fuji II LC showed no significant difference. Microhardness measurements showed that all experimental groups decreased 1 day after exposure to water. After 84 days, microhardness showed no significant difference between Fuji IX GP EXTRA and Fuji IX GP, and Fuji II LC was the lowest. In the solubility measurement, Fuji IX GP EXTRA, Fuji IX GP, and Fuji II LC increased rapidly to 21 days. After 21 days, there was no significant difference in the three groups. As a result, short term fluoride release affects solubility and microhardness, but long term fluoride release has no correlation. Through this study, the amount of fluoride, microhardness, and solubility of various glass ionomers were evaluated, and these properties could be applied clinically.