• Korean Journal of Materials Research
• /
• v.27 no.7
• /
• pp.392-397
• /
• 2017

Fluorine-doped tin oxide (FTO) coated NiCrAl alloy foam is fabricated using ultrasonic spray pyrolysis deposition (USPD). To confirm the influence of the FTO layer on the NiCrAl alloy foam, we investigated the structural, chemical, and morphological properties and chemical resistance by using USPD to adjust the FTO coating time (12, 18, and 24 min). As a result, when an FTO layer was coated for 24 min on NiCrAl alloy foam, it was found to have an enhanced chemical resistance compared to those of the other samples. This improvement in the chemical resistance of using USPD NiAlCr alloy foam can be the result of the existence of an FTO layer, which can act as a protection layer between the NiAlCr alloy foam and the electrolyte and also the result of the increased thickness of the FTO layer, which enhances the diffusion length of the metal ion.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.560-574
• /
• 1997

The present study was undertaken to investigate the crystal growth onto human enamel mineral and synthetic hydroxyapatite(HA) seeds in media resembling the enamel fluid composition. Effects of fluoride at high concentrations on the precipitation were also examined in a bench-top crystal growth model adopting a miniaturized reaction column. The Ca, P and F concentrations and pH values of the inlet and outlet solutions were determined. The recovered solid samples were weighed to assess the amount of minerals precipitated during the experimental period, and finally viewed under a scanning electron microscope. Remarkable findings were that 1) both biological and synthetic seeds with the same total surface areas yielded similar amounts of crystal growth, 2) the amount of crystal growth was accelerated in a manner depending on fluoride concentrations in the media, 3) SEM observations disclosed that without the addition of fluoride, precipitation of thin, plate-like OCP crystals became prominent, but by increasing the fluoride concentration(beyond 1ppm F), rod-like crystals having a pointed edge were most frequently observed, without any evidence for precipitation of the plate-like crystals. Furthermore, the dimension of rod-like crystals was increased in proportion to fluoride concentrations, 4) there was no difference in the morphological feature of precipitated mineral phase upon seeding between human enamel seed and synthetic HA seed. The overall results support the view that the seeded crystal growth model is of value to gain insight into the mechanism of enamel crystal growth under fluoride regimens.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.477-488
• /
• 1996

The purposes of this study were to measure the solubility of the stannous fluoride experimentally, to find a method for improving the solubility of the stannous fluoride, and to observe the effect of longterm storage on the variation of the concentration of fluoride in the stannous fluoride solutions. By adding such materials as antiseptics, dye, flavor, and tastes to solution, the variation of the fluoride concentration was also observed. Ten groups of 0.4% stannous fluoride solutions to which glycerine, sodium chloride, chlorhexidine, dye, flavor, xylitol, and sorbitol were added were prepared. The measurements were carried out by direct calibration. The obtained results were as follows. 1. Effect of adding glycerine as solvent. : The solubility of stannous fluoride increased in the case of adding glycerine. By increasing the glycerine concentration, the fluoride level in stannous fluoride solution also increased. 2. Effect of adding sodium chloride and chlorhexidine. : Comparing to the case of pure water, low fluoride level was measured in case of adding sodium chloride and high fluoride level was measured in case of adding chlorhexidine. 3. Effect of adding erythrosin as dye and banna essence as flavor. : Adding erythrosin and banna essence didn't affect fluoride level. 4. Effect of adding xylitol and sorbitol. : The effects of xylitol and sorbitol were nearly the same as the effect of adding erythrosin and banna essence.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.537-544
• /
• 2016

This study was to investigate their relevance between oral health behaviors and number of remaining teeth of the elderly welfare recipients through the fluoride and scaling of the business. Researcher collected 660 subjects over 60 elderly welfare recipients investigated self-administered survey and use denture and number of remaining teeth though oral examination. Increasingly age number of teeth remaining reduced, there is a difference on the number of remaining teeth according to gender, age, the use of oral hygiene products, self diagnosis oral condition, brushing after lunch and showed significant difference(p<0.05). The remaining number of teeth can be prevented by attention and efforts of subjects. Therefore, we investigated convergent effects of oral health behaviors on number of remaining teeth of the elderly, I hope that oral health care program continually provides expansion of preventive treatment and to maintain the provision of health care about vulnerable group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.84-91
• /
• 2002

The purpose of study was to assess the influence of acidic drinks on the erosion of tooth enamel and the effect of fluoridated saliva on the remineralization. Twenty five drinks were sampled. The erosive potential and remineralizing effect were measured by the tooth surface microhardness test. The pH of most drinks were below pH 5.5. Reduction rates of enamel surface hardness by the flavored carbonated drink were 16.90%, 25.11%, 35.10%, and 41.62% after 5, 10, 30, and 60 minutes of demineralization, and recovery rates by remineralizaing solution were 61.52%, 67.96%, 72.13% and 75.93% after 1, 24, 48, and 72 hours of remineralization, respectively. The results suggest that the most drinks in the markets have the potential to erode the teeth and that erosion occurs fast but remineralization proceeds slowly.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.839-845
• /
• 2011

We performed numerical simulations of freely propagating premixed flames at atmospheric pressure to investigate the influence of trifluoromethane on $CH_4/O_2/N_2$ flames under oxygen enrichment. Trifluoromethane significantly contributed toward a reduction in flame speed, the magnitude of which was larger in terms of the physical effect than the chemical effect. More trifluoromethane could be added and consumed on oxygen-enriched $CH_4/O_2/N_2$ flames. $CHF_3$ was decomposed primarily via $CF_3{\rightarrow}CF_2{\rightarrow}CF{\rightarrow}CF:O{\rightarrow}CO$ and $CHF_3+M{\rightarrow}CF_2+HF+M$ played an important role in oxygen-enhanced flames. When an inhibitor was added to oxygen-enriched flames, the position of the maximum concentration of active radicals was shifted to a relatively low temperature range, and the net rate of OH became higher than that of H.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.436-448
• /
• 1997

Topical fluoride application for children is a widely performed procedure in the field of Pediatric Dentistry for its dental caries prevention effects. However, it is recently recognized as having some unwanted effects on several esthetic restorative materials as it roughens the surfaces of the restorative materials. In order to evaluate the surface changes in esthetic restorative materials, the author immersed composite resin, glass ionomer cement, and resin-modified glass ionomer cement specimens in various topical fluoride agents and measured the weight loss and also, examined the specimens under the scanning electron microscope. The followings are the results : 1. All the specimens immersed in APF gel for 4 minutes showed statistically significant weight loss. (paired t-test, P<0.05). 2. There was no statistically significant weight loss for the resin-modified glass ionomer cement and composite resin groups immersed in sodium fluoride solution (paired t-test, P>0.05). 3. When the glass ionomer cement group was immersed in APF gel for 1 and 4 minutes, there was a statistically significant weight loss compare to other esthetic restorative materials (ANOVA, P<0.05). 4. In the resin-modified glass ionomer cement group and the composite resin group, weight loss in the APF gel 4 minutes immersion group was greater than the 1 minute immersion group, and it was statistically significant (ANOVA, P<0.05). 5. When the specimens were examined under scanning electron microscope, the surface changes were greatest in the order of glass ionomer cement, resin-modified glass ionomer cement, composite resin and also in the order of APF gel 4 minute immersion group, 1 minute immersion group, sodium fluoride immersion group, and control group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.405-421
• /
• 1997

The main purpose of this study was to evaluate the acid resistance and antimicrobial effect of fluoride-laser combined application. Recently extracted third molars were used. $5{\times}3mm$ of the buccal and lingual specimens were exposed and incipient artificial carious lesions were formed by keeping them in the artificial cariogenic solution for 5 days. They were divided into five groups and treated with fluoride and laser according to the predetermined regimen. The acid resistance was compared between groups by chemical quantitative analysis of the calcium and phosphorous released into the test solution after single or combined application of fluoride and laser. The antimicrobial effect of each group was analyzed by counting the number of colony forming units after microbial incubation. The results from the present study can be summarized as follows; 1. Experimental groups showed lower values in calcium and phosphorous contents as well as in $CFU/m{\ell}$(colony forming units) than control group. Combined application groups showed lower values than single application groups. 2. Acid resistance and antimicrobial effect by fluoride and laser treatment were confirmed in this study. 3. Based upon the above-mentioned results of this study, it can be assumed that the use of laser-fluoride combined application may provide the child and adolescent patient population with antimicrobial effect as well as acid resistance. Further studies using various materials and experimental conditions are being encouraged.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.213-219
• /
• 1985

The relative stability as a function of geometry in rigid cyclopropylcarbinyl cations was examined by $^{19}$F-nmr spectroscopy. 8-p-Fluorophenyl-tricyclo[3.3.1.0$^{2,7}$]octane-8-yl-(I), 9-p-fluorophenyl-tricyclo[3.3.1.0$^{2,8}$]nonane-9-yl (II), and 10-p-fluorophenyl-tricyclo[4.3.1.0$^{2,9}$]decane-10-yl cation(Ⅲ) were prepared from the corresponding carbinols in FSO$_3$H-SO$_2$ClF solution at -120$^{\circ}C$. $^{19}$F-nmr data indicate that the symmetrical bisected geometry of cyclopropane ring for ${\sigma}$-conjugation is a very impotant factor in charge delocalization. However, varied orientation of the bond angle ${\theta}$ within the bisected conformation does not affect the charge delocalization into the cyclopropane ring.

• Journal of Adhesion and Interface
• /
• v.7 no.2
• /
• pp.19-25
• /
• 2006

Since the enzymatic degradation of microbial poly(hydroxylalkanoate)s (PHAs), such as poly[(R)-3-hydroxybutyrate] and poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] initially occurs by a surface erosion process, their degradation behaviors can be controlled by the change of surface property. In order to control the rate of enzymatic degradation, plasma modification technique was applied to change the surface property of microbial PHAs. The surface hydrophobic and hydrophilic properties of PHA films were introduced by $CF_3H$ and $O_2$ plasma exposures, respectively. The enzymatic degradation was carried out at $37^{\circ}C$ in 0.1 M potassium phosphate buffer (pH 7.4) in the presence of an extracellular PHB depolymerase purified from Alcaligenes facalis T1. The results showed that the significant retardation of initial enzymatic erosion of $CF_3H$ plasma-treated PHAs was observed due to the hydrophobicity and the enzyme inactivity of the fluorinated surface layers while the erosion rate of $O_2$ plasma-treated PHAs was not accelerated.