• Korean Journal of Cognitive Science
• /
• 제31권2호
• /
• pp.25-54
• /
• 2020

While there is no evidence for parafoveal processing in alphabetic languages such as English and Finnish, there is some evidence that morphological information is processed in syllabic languages like Chinese. Korean writing system, Hangul, would be able to provide morphological preview benefit effects since it is an "alphabetic syllabary" which contains both alphabetic and syllabic features. This study explored morphological parafoveal preview benefit effects during reading Korean using irregular verbs, which have phonological and orthographical differences between fundamental and conjugated forms. In the Experiment, the target word was irregular conjugated form, and there were four preview conditions: identical (e.g. 구워), fundamental form (e.g. 굽다), orthographically related (e.g. 굼다), and unrelated control (e.g. 죨어). In the result of study, identical was shortest and morphological, orthographical, unrelated preview were followed. Moreover, measures of first-pass reading of morphological preview were significantly shorter than those of unrelated control preview. This results support the hypothesis of morphological preview benefit effects in Korean. The implications of the results are discussed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제32권6호
• /
• pp.531-552
• /
• 2020

In the previous study, both the wave characteristics at the tip of composite breakwater and on caisson were investigated by applying olaFlow numerical model of three-dimensional regular waves. In this paper, the same numerical model and layout/shape of composite breakwater as applied the previous study under the action of one directional irregular waves were used to analyze two and three-dimensional spatial change of wave force including the impulsive breaking wave pressure applied to trunk of breakwater, the effect of rear region, and the occurrence of diffracted waves at the tip of caisson located on the high crested rubble mound. In addition, the frequency spectrum, mean significant wave height, mean horizontal velocity, and mean turbulent kinetic energy through the numerical analysis were studied. In conclusion, the larger wave pressure occurs at the front wall of caisson around the still water level than the original design conditions when it generates the shock-crushing wave pressure in three-dimensional analysis condition. Which was not occurred by two-dimensional analysis. Furthermore, it was confirmed that the wave pressure distribution at the caisson changes along the length of breakwater when the same significant incident wave was applied to the caisson. Although there is difference in magnitude, but its variation shows the similar tendency with the case of previous study.

• The Journal of the Korea Contents Association
• /
• 제7권4호
• /
• pp.170-177
• /
• 2007

When buoyant objects appear in contents, it is helpful in developing contents to express their attributes such as their length, width, weight, and velocity, and the magnitude and direction of regular waves dynamically. Therefore, we verify how the attributes of buoyant objects and the characteristics of waves cause the heaving motion of buoyant objects to change by using the equation of motion used in the naval architecture and ocean engineering. Our research results may help contents developers to develop contents with buoyant objects even if they do not understand the naval architecture and ocean engineering well. We show that we can calculate the motion of buoyant objects dynamically even if the velocity of buoyant objects or the characteristics of waves change dynamically. In the future, we will study how buoyant objects move on the irregular waves, and develop engines for buoyant objects on the real sea.

• Journal of the Society of Naval Architects of Korea
• /
• 제34권4호
• /
• pp.1-11
• /
• 1997

When a barge is towed by a tug boat using a tow line, the barge is frequently subject to a large sway motion induced from its inherent yaw motions. This large sway motion combined with external forces due to winds and waves may makes the towing to be difficult or even dangerous. It has been reported that in worse situations, barges or tugs are capsized. In addition, the large sway motion of the towed barge gives a menace to the safety of ships navigating nearby. This paper is the results of the experimental investigation into the course stability of an 8,000 DWT barge using a Towing Tank and a Circulating Water Channel. Various skegs are designed and course stability tests for the barge with skegs are conducted in calm water and in irregular waves. It is observed that an effective skeg attached to the barge enables the sway motion to be zero while the sway amplitude of the bare hull is around 10 times its breadth.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제31권8호
• /
• pp.50-57
• /
• 2003

Controlling rotorcraft to fly precisely through multiple, irregularly, and closely spaced waypoints is a common and practical mission. However, finding an optimal trajectory for this kind of mission is quite challenging. Usability of traditional approaches such as inverse control or direct methods to this kind of problem is limited because of either limitation on the specification of the constraints or requirement of extensive computation time. This paper proposes a method that can easily compute the full trajectory and control history for rotorcraft to pass through waypoints while satisfying other general constraints of states such as velocities and attitudes on each waypoint. The proposed method is applied to rotorcraft guidance problems of slalom and linear trajectory in the middle of general curved trajectory. The algorithm is test for various situations and demonstrates its usability.

• Journal of Ocean Engineering and Technology
• /
• 제3권2호
• /
• pp.45-50
• /
• 1989

원유의 발견과 함께 북극의 개발이 활발해저왔고, 지역의 특수한 환경적인 요건으로 인해 시설물의 개발, 설치, 이동, 운용에 많은 어려움을 갖고 있다. 특히 빙산에 의한 극지 해안가의 해저면은 파이고, 손상되고, 변형된다. 북 알라스카의 해저면을 고르지 못하고, 불규칙하게 파이고, 손상된 형태를 보여주고, 특히 빙산의 활동이 활발한 지역과 시기에는 그 손상이 더욱 심하고, 자주 일어난다. 빙산에 의한 해저면의 홈은 빙산 해저 끝이 해저면에 접촉하여 해저 바닥을 파 나갈때 일어나는 현상이다. 빙산의 운동에너지는 해저면을 파 나가는 에너지로 변형되고, 그 힘이 평형하게 될 때까지 빙산의 운동은 계속된다. 빙산에 의한 해저면 손상은 극지 해안가의 해저시설물의 설계, 설치, 운용에 중대한 영향을 끼친다. 그러므로, 해저면 손상의 데이타 분석은 해안의 개발과 시설물의 설치에 큰 도움이 된다. 이 논문에서는 8년간에 걸친 약 십만개가 넘는 데이타를 토대로 알라스카 뷰오포트 해안가의 빙산에 의한 해저면 손상의 통계학적인 연구결과를 보여준다. 또한 각 변수의 최대치와 수심에 따른 변수의 최대 경계선을 추정하였고, 변수들의 상호관계를 연구하였다.

• Journal of the Society of Naval Architects of Korea
• /
• 제29권2호
• /
• pp.60-65
• /
• 1992

The roll response of a ship to random beam seas is investigated in terms of the threshold crossing process. The non-white excitation process is modeled as an equivalent white-noise one based on the assumption that the upcrossing properties of the response can be approximately replaced by the excitation with a white noise process with a suitable intensity. Then the non-linear damping is reinstated. The reinstated equation of motion with the equivalent white-noise intensity is solved using the equivalent non-linear method to get the desired probability density function. The proposed scheme is tested extensively with varing coefficients.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제24권3호
• /
• pp.189-202
• /
• 2012

An Oscillating Water Column (OWC) wave generation system uses the air flow induced by the vertical motion of water column in the air chamber as a driving force of turbine. It is well known that OWC is one of the most efficient devices to harness wave power. This study estimated the air flow velocity from the time variation of the water level fluctuation in the air chamber under regular wave conditions using 3-dimensional numerical irregular wave tank (3D-NIT) model that can simulate the 3-dimensional irregular wave field. The applicability of the 3D-NIT model was validated by comparing numerically predicted air flow velocities with hydraulic experimental results. In addition, the characteristics of air flow frequency spectrum variation due to the incident frequency spectrum change, and the variations of frequency spectrum and wave reflection due to the existence of converter inside the air chamber were discussed. It is found that the phase difference exists in between the air flow velocity and the water level fluctuation inside the air chamber, and the peak frequency of the spectrum in water level fluctuation is amplified by the resonance in the air chamber.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제46권8호
• /
• pp.631-638
• /
• 2018

In this paper, we propose a method to improve the performance by guidance technique and applying it to the precision guided ammunition. The proposed method is a technique designed to reduce the target error of ammunition by reducing the projectile error without analyzing the motion characteristics of the shot. This technique is applied to the moving average filter technique which is widely used as signal processing technique to reduce the fluctuation of the output of the inboard mounting inertial sensor caused by the rotation and the coning motion of the ammunition. In order to compare the performance of the applied technique including the simple 3D guided control technique and the proposed improvement technique. It is confirmed that the application of this technique improves the accuracy of impact of the cannon - launched ammunition with severe environmental conditions and irregular motion characteristics unlike the missile.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.191-203
• /
• 2018

This study was investigated the effect of the morphology change of copper (Cu) powders under the different rotational speed and milling time by using three kinds of grinding media with different size and materials, and performed DEM simulations of ball behavior. In order to clarify the mechanism of grinding by three - dimensional simulations of the ball behavior in a traditional ball mill, the force, kinetic energy, and medium velocity of the grinding media were calculated. In the simulation, the amount of change of the input energy was also calculated by adjusting the rotational speed, ball material, kinetic velocity, and friction coefficient in the same as the actual experimental conditions. The scanning electron microscope results show that the particle morphology changes from irregular to spherical when the ball size is small.