• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.54-63
• /
• 1997

The 1-D finite-element mehtod is applied for designing double-clad otpical fibers with dispersion-compensation capability. design parameters allowing only a $LP_{01}$ single mode are treated and macro-bending loss are taken into consideration. Design parameters are extracted to have the compensation ratio $(L_{SMF}/L_{DCF})$ of 6.2 for core structure with step-index profile, and of 5.2 for core with triangular-index profile.

• 기계저널
• /
• 제34권4호
• /
• pp.239-252
• /
• 1994

광섬유 모재제조공정인 OVD와 VAD방식에서의 입자부착 증진을 위해서 외부에서 전기장을 가 해서 실리카입자를 대전시킨 뒤에 타겟으로 부착을 시키는 전기영동원리를 이용하는 방법을 소 개하였다. 실험에서는 디스크형 타겟을 사용하여 타겟 근방에서의 온도, 전기장분포를 측정하였고 입자부착실험을 수행했다. 그 결과 9cm 타겟에 -1.6kv가 가해\ulcorner을 때 전기영동으로 인한 부착률 증가는 열영동으로 인한 효과의 약 35%가 되었다.

• 한국광학회지
• /
• 제13권1호
• /
• pp.58-64
• /
• 2002

마하젠더형 광세기 변조기를 이용하여 l0 GHz 고조모드잠금된 분산보상 어븀첨가 광섬유 레이저의 출력 안정화 되먹임 제어를 하고 출력의 안정도를 측정하였다. 레이저의 출력 불안정성이 발생하였을 때 나타나는 완화진동 주파수 성분을 억압하도록 공진기 길이를 조정하여 16시간 이상 출력 안정화를 시켰다. 이때, 안정화가 진행되는 동안 rms 위상잡음과 rms진폭잡음은 각각 260 fsec-524 fsec와 4-11.5%의 사이에 분포하였고, BER은 $10^{-13}$ 으로 측정되었다.

• 한국광학회지
• /
• 제25권2호
• /
• pp.72-77
• /
• 2014

본 논문에서는 초소형의 광섬유 결합형 테라헤르츠 모듈을 이용하여 테라헤르츠 시간영역 분광 및 영상 시스템을 구성하였다. 구성된 THz 분광 시스템을 이용하여 3 THz 이상의 자유공간에 분포되어 있는 수분의 고유 흡수 스펙트럼을 관측하였고 테라헤르츠 대역에서의 Si, $Al_2O_3$, GaAs기판에 대한 굴절률을 측정하였으며 측정을 위해 다중 반사를 고려한 전달 함수를 이용한 굴절률 측정 방법을 이용하였다. 또한, 테라헤르츠 영상 시스템을 이용하여 의료용 칼과 클립을 측정하여 250 ${\mu}m$ 간격으로 $192{\times}89$ 픽셀의 영상을 얻었다.

• 지구물리
• /
• 제8권2호
• /
• pp.75-80
• /
• 2005

Optical fibre sensors have shown a potential to serve real time health monitoring of Slope and structure. They can be easily embedded or attached to the structures and are not affected by the electro-magnetic field. Furthermore, they have the flexibility of the sensor size and very highly sensitive. In this study, we conducted several laboratory on slope and field tests using a novel optical sensor based on Brillouin scattering and PVC pipe. One of the advantages of this technique is that the bare fibre itself acts as sensing element without any special fibre processing or preparation. Test results have shown that BOTDR can be a great solution for sensor systems of Slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.475-482
• /
• 2002

Optical fibre sensors have shown a potential to serve real time health monitoring of Slope and structure. They can be easily embedded or attached to the structures and are not affected by the electro-magnetic field. Furthermore, they have the flexibility of the sensor size and very highly sensitive. In this study, we conducted several laboratory on slope and field tests using a novel optical sensor based on Brillouin scattering and PVC pipe. One of the advantages of this technique is that the bare fibre itself acts as sensing element without any special fibre processing or preparation. Test results have shown that BOTDR can be a great solution for sensor systems of Slope.

• 센서학회지
• /
• 제22권4호
• /
• pp.297-301
• /
• 2013

We proposed and demonstrated a distributed fiber-optic overheating detection sensor using optical time domain refrectometry. With increased of temperature the optical fiber is bended by a bi-metal and it result in optical leaky loss of the fiber. The sensor structure is designed in such a way that the signal of overheating is happen when the temperature exceeding a threshold temperature and the optical fiber is protected from excess bending.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.579-587
• /
• 1998

In this study, fatigue behavior of the optical fiber sensor embedded in composite laminate was investigated. Static tensile and fatigue tests were performed for three types of laminated composite specimens with embedded optical fiber sensor in the neutral plane ; [0/sub 6//OF/0/sub 6/]/sub T/, [0/sub 2//90/sub 4//OF/90/sub 4//0/sub 2/]/sub T/ and [0/sub 3//90/sub 3//OF/90/sub 3//0/sub 3/]/sub T/. The fracture of the embedded optical fiber sensor was detected by the intensity drop off of laser signal transmitted through the optical fiber sensors embedded within laminated composite specimen. The maximum fatigue stress applied to laminated specimen was compared with the average tensile stress at which the fracture of the embedded optical fiber within the laminate occurred under static tensile loading. From the experiments, firstly it is observed that the decrease in the life of optical fiber sensors embedded within unidirectional-ply laminate by the fatigue loading is relatively small compared to that of cross-ply laminate. Secondly, the optical fiber embedded in unidirectional-ply laminate is fractured by the fatigue damage due to the growth of internal defects of optical fiber, however the optical fiber embedded in cross-ply laminate is fractured by the growth of transverse matrix crack.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.46-47
• /
• 2000

고출력, 고효율, 그리고 고품질의 빔특성을 갖는 DPSSL을 개발하기 위해서는 출력빔을 저하시키는 원인인 비균일한 여기빔 분포에 의한 레이저 결정내의 열렌즈, stress 복굴절 등의 효과를 최소화하여야 한다. 지금까지 열효과를 줄여, 고출력이나 TE $M_{00}$ 모드의 레이저 빔을 얻기위한 방법으로 zigzag 슬랩 디자인$^{1)}$ , VPS 여기 시스템$^{2)}$ , Cusp 형 반사체$^{(3)}$ , 광섬유 결합$^{(4)}$ 등의 방법이 연구되어 왔다. 본 연구에서는 고출력, 고효율, 그리고 고품질의 레이저 빔특성을 동시에 만족하는 레이저를 개발할 목적으로 산란된 여기빔을 이용하는 여기구조를 고안하고 열효과가 감소된 Nd:YAG 레이저 시스템을 최적설계하였다. (중략)략)

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.627-632
• /
• 2010

Recently the research for lightening the railway vehicle is actively made according to the demand of the environment-friendly technology development contributing to the energy cost reduction and the green growth. The railway vehicle lightweight research is expanded to the load-supporting first structure from the secondary structure which doesn't support the load. After the composite car body development used in the Korean tilting train is completed, the composite bogie frame development in which the weight reduction efficiency is large is progressed. In this paper, distributed strain was monitored when the train load was added to the central part of the composite bogie side-frame. By using the optical fiber which was attached to the lower part of the side-frame and the developed Brillouin correlation domain analysis (BOCDA) system, the strain distribution could be measured with 3cm step over 3m section. This strain distribution was compared with the design value by the FE analysis when the load of 14ton and 18ton added. This experiment can verify the manufactured composite bogie side-frame.