• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.835-846
• /
• 1999

In this experiment I have made FM-DS/SS system replacing 170.120 MHz by utilizing FM transmitter and receiver. In the transmitter, the result shows that the modulated FM-DS/SS signal is a typical $(sin \chi/\chi)^2$ spectrum by using the clock(1.329 MHz) of PN divided from FM carrier. In the receiver, SO(Synchronous Oscillator) was applied to despread. Like figure 1, 2, and 4 when I applied SO, which consists of sliding correlator, to synchronous a favorable properties could be obtained in the receiver of FM-DS/SS system. In this paper, I used SO in order to take synchronous in the construction of FM-DS/SS system, and to support it I presented the result of the experiment on synchronous curve and properties of OS.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.649-656
• /
• 2002

This paper addresses the phase noise analysis of high-speed DH-PLL(Digital Hybrid Phase-Locked Loops) frequency synthesizer. Because of the additional quantization noise of D/A converter in DH-PLL, the phase noise of DH-PLL is increased than the conventional PLL. Three kinds of noise sources such as reference input, D/A converter, and VCO(Voltage Controlled Oscillator) are considered to analyze the phase noise. It largely depends on the closed loop bandwidth and frequency synthesis division ratio(N) so that we can decide the optimal closed loop bandwidth to minimize the phase noise of DH-PLL. It is shown that the simulation results closely match with the results of analytical approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2933-2938
• /
• 2014

In this paper, the FLL(Frequency Locked Loop) circuit using current conveyor circuit is designed by $0.35{\mu}m$ CMOS process. The FLL circuit is built in a frequency divider, a frequency-to-voltage converter, a voltage subtractor and a oscillator and the circuit blocks have a symmetric structure to improve a reliability characteristics with a process variation. From the simulation results, the variation rate of output frequency is about less than ${\pm}1%$ when the channel length, channel width, resistance and capacitance are varied ${\pm}5%$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.787-795
• /
• 1994

In this paper, we have proposed a bit synchronization algorithm which extracts the synchronized clock for random NRZ signal and designed a circuit followed by its performance analysis. The synchronization circuit consists of the Data Transition Detector and Mod 64 Counter, Phase Comparison and Controller, 64 Divider. The data input rate and master clock rate are 16 Kbps and 4.096MHz, respectively. The phase is compensated by 1/64 of the data signal period for every data bit. Through a series of experiments, the maximum immunity of phase jiter for input signal and the deviation of the recovered clock are measured 23.8% and 1.6%, respectively. The fully digital synchronization circuit is simple to implement into signal IC chip and also effective for the low speed digital mobile communications.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.35-43
• /
• 1998

This study has been experimented the characteristics of synchronous oscillator for clock recovery of Direct Sequence/Spread Spectrum(DS/SS) communication. When external wave is not provided, The Synchronous Oscillator(SO) oscillates at its natural frequency. As soon as external signal is applied, the SO starts tracking the external frequency which can be sinusoidal, pulsed or some other waveform. Thus, the output is synchronized with the range of wide tracking bandwidth to the external frequency Specifically, the SO also posses frequency division and multiplication capability. All of these indicate that the SO can overcome difficulties to get synchronization in coherent digital communication systems. We make a practical application of DS/SS communication with study on the synchronous properties of SO. As the result, we have a good performance.

• Korean Journal of Weed Science
• /
• v.3 no.1
• /
• pp.14-22
• /
• 1983

To study ecological characteristics of Cyperus serotinus occuring in Korea its propagules were collected from 6 locations from the northern part to the southern part of Korea (Chuncheon, Suweon, Iri, Jeonju, Gwangju, Milyang) in 1981, cultured and replanted 4 times (May 20, June 5, June 20, July 5) in 1982. They flowered from August 10 to August 29 in the plants planted on May 20 and from August 22 to September 4 in the plants planted on July 5. Plant height, number of tillers and top fresh weight were 85-100cm, 375-1,500 tillers/$m^2$ and 500-1,750g/$m^2$, respectively, when they were planted on May 20, and 58-67cm, 300-625 tillers/ $m^2$ and 125-250g/$m^2$, respectively, when they were planted on July S. Weight of seeds and number of rhizomes per plant were 20-50g/$m^2$ and 20.75-61, respectively, whey, they were planted on May 20, and 5-17.5g/$m^2$ and 51.5-80.25 when they were planted on July 5. Local collections showed. the same morphological characteristics at the level of species identification, but there existed variations among the local collections. Cyperus serotinus from Chuncheon and Suweon were longer in the length of inflorescence, than those from Gwangju and Milyang and rhizomes from Chuncheon and Suweon were thicker than the others. Each of local collections may be regarded as different ecotype based on the above mentioned differences in morphology, growth and flowering response to the planting date. The results appear to imply that Cyperus serotinus weeds occuring in various locations of Korea are different one another in competitive ability with rice crop.

• Korean Journal of Weed Science
• /
• v.16 no.4
• /
• pp.264-281
• /
• 1996

As a consequence of wide use of herbicides, Eleocharis kuroguwai Ohwi became a dorminant problem weed for rice cultivation in Korea. To understand the establishment of the weed, experiments on physio-ecological characteristics were carried out sprouting and occurrence, the results could be summarized as follows: Sprouting percentage remained 68 to 73% until the time of field emergence, indicating many of the them are still dormant. The proportion of the dormant tubers were greater for the smaller than the bigger tubers. Apical dominance was apparent in sprouting, with 84% of tuber sprouted from only one of the apical buds. Tubers sprouted from 2 or 3 buds were less than 20%, and were mostly from the bigger tubers. When the shoot growth was compared, by controlling the others, ones from apical and the next 3 buds showed similar vigorous growth, but the later ones showed poorer growth. For the longevity of tubers, deep soil storage appeared to be better than storage in temperature controlled room to 2~$3^{\circ}C$. Emergence of E. kuroguwai was better in clay soil than in sand, and the possible depth for emergence in clay soil appeared to be up to 21cm, but was 15cm in sand. When tubers were exposed to salt solutions before emergence tests, E. kuroguwai appeared to be much sensitive to salts than S.planiculmis. Among the tubers formed in previous year, 12.7% remained still viable until the end of next crop season, but with relatively strong dormancy. The first emergence was about 10 days after planting at ordinary cropping seasons, and the days to the maximum shoot number stage were 60~90 from planting. The duration was extended at early transplanting, and shoot number, leaves per shoot, and tubers developed per plant were also greater at early plantings. The 6th order offshoots were developing when E. kuroguwai was planted at early season. When planted at later seasons, generation and the number of offshoots was reduced planted at early season. When planted at later seasons, generation and the number of offshoots was reduced and the number of tubers, runner and rhizome lengths was also reduced.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.86-92
• /
• 2001

Position controls are very important in semiconductor manufacturing devices, machine tools, precision measuring instruments, etc. to measure the distance of movement of moving objects in minute units and the accuracy of measurement for the moving distance in these devices affect the performance of the whole devices. Therefore, in those precision instruments, a sensing device that can measure the distance of movement with high-precision resolution is required. Thus an optical encoder that has such advantages as easy digital interface, economical price, and a resolution similar to that of laser interferometers can be used. In this paper, a interferometer-type linear scale with easy digital interface and high-resolution has been set up and measured the distance of movement based on the diffraction principle. Interference signals produced in this optical setup of the linear scale have beers digitalized through fabricated photodetectors and designed signal processing circuits. A resolution of 0.5${\mu}{\textrm}{m}$ is acquired from the experimental interferometer-type linear scale without for the movement of scales any additional dividing circuits. It is shown that from this experiment a high-resolution distance measurement device can be designed by a simple optical setup.

• Journal of Advanced Navigation Technology
• /
• v.5 no.1
• /
• pp.1-10
• /
• 2001

Speech has a good characteristics of which car drivers busy to concern with miscellaneous operation can make use in convenient handling and manipulating of devices. By utilizing this, this works proposes a speaker verification method for protecting cars from being stolen and identifying a person trying to access critical on-line services. In this, continuant phonemes recognition which uses language information of speech and MLP(mult-layer perceptron) which has some advantages against previous stochastic methods are adopted. The recognition method, though, involves huge computation amount for learning, so it is somewhat difficult to adopt this in speaker verification application in which speakers should enroll themselves at real time. To relieve this problem, this works presents a solution that introduces speaker cohort models from speaker verification score normalization technique established before, dividing background speakers into small cohorts in advance. As a result, this enables computation burden to be reduced through classifying the enrolling speaker into one of those cohorts and going through enrollment for only that cohort.

• Restorative Dentistry and Endodontics
• /
• v.27 no.6
• /
• pp.600-611
• /
• 2002

본 연구의 목적은 클로로필린이 치주인대 세포 생활력에 미치는 영향을 평가하는데 있다. 치주인대 세포는 건강한 사람에서 발치한 소구치의 치주인대 조직으로부터 채취하여 배양하였다. 비교 기준을 설정하기 위하여, HBSS 내에서 $37^{\ circ}C$로 보관한 치주인대 세포수의 50%가 생존하는데 소요되는 시간을 MTT 분석법에 의해 측정하였다. 그 결과는 6시간이었다. HBSS에 클로로필린 10, 100, 500 nM이 각각 첨가된 3군의 실험 보존액과 F-medium, ViaSpan, Likorol 등 모두 6군의 실험 보존액을 96-well plate에 접종한 후, 치주인대 세포를 동일한 수로 분주하였다. 이를 6시간동안 보관한 후, 각 실험군 보존액에서의 세포 생활력을 MTT 분석법으로 측정하였다 또한, HBSS와 F-medium 및 클로로필린 500 nM이 첨가된 HBSS군의 세포들에 대해 유식세포 계측을 시행하여 각각의 세포주기를 분석하였다. 실험 결과, 클로로필린 500 nM이 첨가된 HBSS에서 보관한 세포들이 가장 높은 생활력을 나타내었으며, 클로로필린이 첨가되지 않은 HBSS에 비해서 유의하게 양호한 세포 생활력 유지 능력을 보였다. 클로로필린으로 처치한 세포들은 클로로필린의 농도가 커짐에 따라 세포 생활력이 증가하는 양상을 나타내었다. 유식세포 계측 결과, HBSS와 F-medium 및 클로로필린 500 nM이 첨가된 HBSS에서 보관한 세포의 77~80%가 G0-G1 단계의 세포 주기로 측정되어, 대부분의 세포들이 안정된 세포 대사 상태를 보이는 것으로 나타났다. 결론적으로, 클로로필린 처치는 치주인대 세포의 생활력 유지에 도움이 되는 것으로 사료된다.