• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.5
• /
• pp.653-656
• /
• 2009

This paper is intended as an investigation of the method of extraction and the analysis by high-performance liquid chromatography mass spectroscopy of decursin and decursinol angelate in the dried root of Angelica gigas Nakai. The extracted decursin and decursinol angelate were the purity of >95% using 60% ethanol at $-20^{\circ}C$ for 12 hours by HPLC analysis. Decursin and decursinol angelate were efficiently isolated using recycling HPLC. The purity of isolated decursin and decursinol angelate was identified as 99.97 and 99.40% by HPLC analysis, respectively. The molecular weights of Decursin and decursinol angelate were also identified as m/z=329 ($[M+H]^+$) and m/z=351 ($[M+Na]^+$) by mass spectroscopy.

• Journal of Elementary Mathematics Education in Korea
• /
• v.16 no.1
• /
• pp.21-38
• /
• 2012

In this study, elementary mathematics textbooks from grade 1 to grade 6 of Korea and Yanbian Korean Autonomous Prefecture are compared. This study is limited to number area. In this study, textbooks of Korea are developed according to the 2007 curriculum and published between 2009 and 2011 and textbooks of Yanbian are published between 2009 and 2010. Seven implications for developing Korean textbooks can be drew from Yanbian textbooks as conclusions. First, it is necessary to consider using counters to teach place values. Second, it is necessary to consider reading inequalities in style of one to one correspondence between signs and words. Third, it is necessary to consider mentioning explicitly that it is possible to express the concrete whole which has a continuous quantity as natural number 1. Fourth, it is necessary to consider introducing term of fraction line that separates the numerator and denominator. Fifth, it is necessary to consider mentioning explicitly the properties of the fraction. Sixth, it is necessary to consider broadening examples to use decimals. Seventh, it is necessary to consider stating clearly that it is possible to make an additional place of decimals by adding a zero at the right end of the decimals.

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.137-141
• /
• 1985

Some properties of six kinds of waxy starches isolated from Olchal and Hankang(both of waxy rice), Chalborie (waxy barley), Yullmoo (waxy Job' tears), Chajoe (waxy foxtail millet), Chalsusu (waxy great millet) and Chalocsusu(waxy corn) were investigated. The average diameters of their starch granules were $4.2{\sim}19.0$ microns. X-ray diffraction study showed that these starches had A pattern. Blue values of iodine complexes of these waxy starches were $0.02{\sim}0.08$. The number of glucose units per segment of amylopectin molecule were $21{\sim}23$. Their raising powers were $180{\sim}280$.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.344-351
• /
• 2004

Poly(ethylene glycol)-based diblock and triblock polyester copolymers stimulating to temperature were studied as injectable biomaterials in drug delivery system because of their nontoxicity, biocompatibility and biodegradability. We synthesized the diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) (M$_{n}$=750 g/mole) and poly($\varepsilon$-caprolactone) (PCL) by ring opening polymerization of $\varepsilon$-CL with MPEG as an initiator in the presence of HCl . Et$_2$O. The aqueous solution of synthesized diblock copolymers represented sol phase at room temperature and a sol to gel phase transition as the temperature increased from room temperature to body temperature. To confirm the in vivo gel formation, we observed the formation of gel in the mice body after injection of 20 wt% aqueous solution of each block copolymer. After 2 months, we observed the maintenance of gel without dispersion in mice. In this study, we synthesized diblock copolymers exhibiting sol-gel phase transition and confirmed the feasibility as biomaterials of injectable implantation.n.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.227-227
• /
• 2013

본 연구에서는 Si(111) 기판에 성장온도 및 InN 증착양 변화에 따른 InN 양자점(Quantum Dot) 핵성생(Nucleation) 특성에 대해 논의한다. InN 양자점은 Nitrogen-Plasma 소스를 장착한 분자선증착기(MBE)를 이용하여 $0.103{\AA}/s$의 성장속도로 성장하였다. 성장온도를 $700^{\circ}C$에서 $300^{\circ}C$로 변환하면서 형성한 시료에서 lnN 양자점의 공간밀도는 $9.4{\times}10^7/cm^2$부터 $1.1{\times}10^{11}/cm^2$를 나타냈다. 가장 높은 공간밀도인 $1.1{\times}10^{11}/cm^2$는 기존에 보고된 값 ($7.7{\times}10^{10}/cm^2$)보다 상대적으로 높은 값을 갖는다 [1,2]. InN 증착양을 93, 186, 및 $372{\AA}/s$으로 각각 변화시켜 형성하여 양자점의 초기 성장거동을 분석하였다. InN 증착양이 증가함에 따라 양자점의 공간밀도는 $4.4{\times}10^{10}/cm^2$에 $6.4{\times}10^{10}/cm^2$까지 증가하였다. 일반적으로 InP 및 GaAs 기판을 기반으로 한 In(Ga)As 양자점은 증착양이 증가함에 따라 밀도는 감소하고 크기는 증가하는 경향을 보이며, 이는 같은 상 (Phase)을 갖는 물질들끼리 결합하려는 경향이 있기 때문이다. 본 실험에서는 기존 결과와 다른 경향을 보이고 있는데, 이는 Si(111) 기판과 InN 사이의 격자부정합이 상대적으로 크기 때문에 InN 양자구조가 커지는 대신 추가로 새로운 핵생성 메커니즘에 의한 것으로 설명할 수 있다. 이러한 InN 증착양에 따른 InN 양자점 성장거동을 표면에너지를 포함한 이론적인 모델을 통해 논의하고자 한다.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.539-544
• /
• 2012

We have grown AlN nanorods and AlN films using plasma-assisted molecular beam epitaxy by changing the Al source flux. Plasma-assisted molecular beam epitaxy of AlN was performed on c-plane $Al_2O_3$ substrates with different levels of aluminum (Al) flux but with the same nitrogen flux. Growth behavior of AlN was strongly affected by Al flux, as determined by in-situ reflection high energy electron diffraction. Prior to the growth, nitridation of the $Al_2O_3$ substrate was performed and a two-dimensionally grown AlN layer was formed by the nitridation process, in which the epitaxial relationship was determined to be [11-20]AlN//[10-10]$Al_2O_3$, and [10-10]AlN//[11-20]$Al_2O_3$. In the growth of AlN films after nitridation, vertically aligned nanorod-structured AlN was grown with a growth rate of $1.6{\mu}m/h$, in which the growth direction was <0001>, for low Al flux. However, with high Al flux, Al droplets with diameters of about $8{\mu}m$ were found, which implies an Al-rich growth environment. With moderate Al flux conditions, epitaxial AlN films were grown. Growth was maintained in two-dimensional or three-dimensional growth mode depending on the Al flux during the growth; however, final growth occurred in three-dimensional growth mode. A lowest root mean square roughness of 0.6 nm (for $2{\mu}m{\times}2{\mu}m$ area) was obtained, which indicates a very flat surface.

• Journal of Genetic Medicine
• /
• v.7 no.2
• /
• pp.151-155
• /
• 2010

Apert syndrome is a rare congenital anomaly characterized by craniofacial malformations and severe symmetrical syndactyly of fingers and toes. This syndrome is caused by a genetic mutation; the S253 mutation is common, though the P253R mutation is not as frequent. Common symptoms include skeletal malformations, poor joint mobility, eye and ear problems, cleft palate, and orthodontic and other dental problems. We report a case of an infant with the common morphological features of Apert syndrome. Interestingly, she was found to have the P253R mutation in FGFR2 exon VIII, which has been less commonly observed in Korea. A brief review of the literature is included.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.1056-1062
• /
• 2004

Migration of low molecular weight components from expanded polystyrene (ESP) to distilled water was measured at different temperature conditions. Overall migration and specific monomer migration were measured. Diffusion model based on Fick's law was used to determine the apparent diffusion coefficients at various experimental conditions. The overall and specific migration levels were estimated to give some practical implications for regulatory guideline development and safe package design. Diffusion coefficients for overall migration in KMnO$_4$ oxidizable extractives and specific migration of styrene monomer from ESP at 6$0^{\circ}C$ were 0.030 and 6.8${\times}$10$^{-5}$ $\textrm{mm}^2$/h, respectively. Their temperature dependence could be explained by Arrhenius equation with respective activation energies of 80.5 and 98.6 kJ/㏖. Experimental conditions ensuring desired migration level were suggested for reliable examination of migration from the packaging material. Some explanatory estimations of migrations were given for some typical conditions of potential usages.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.523-535
• /
• 1992

The conformations of hexapeptides, their complexation with alkali cations and the inhibition of the cation transport by 5,5-diphenylhydantoin(DPH) were studied theoretically using ECEPP/2 and MM2 force field. Several low energy conformations of uncomplexed cyclic hexapepides are obtained, and they adopt compact conformations in which most amide hydrogens form intramolecular hydrogen bond to amide carbonyl oxygens. The complexation energy of the peptide with $Na^+$ ion and DPH is -60 kcaal/mol and -18 kcal/mol, respectively. However, no suitable cavity to bind metal cation exists for the local minima of the peptide, and the internal energy of the uncomplexed hexapeptide having cavity is higher than that of the uncomplexed global minimum of this work by 10 kcal/mol. Also, one of the most important amino acid residue to bind DPH is Glycine, and this can explain experimental observation that the replacement of Gly by Sarcosine (N-methyl Glycine) reduce the inhibition ability of the cation transport.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.225-230
• /
• 2022

A new two-fold interpenetrating two-dimensional (2D) Tb(III) metal-organic framework (MOF), [Tb(p-XBP4)_2.5(H₂O)₂]·W(CN)₈ (1), was prepared using a p-XBP4 (N,N'-p-phenylenedimethylenbis(pyridin-4-one)), Cs₃[W(CN)₈], and Tb(NO₃)₃·6H₂O. The single crystal X-ray diffraction indicated that Tb-MOF exhibits a unique two-fold interpenetrating 2-D framework. It was also characterized through Fourier transform infrared spectroscopy (FTIR), and single and powder X-ray diffraction. To probe the molecular magnetic behavior, the magnetic properties of Tb-MOF were investigated by direct-current (DC) and alternating-current (AC) magnetic susceptibilities measurements and discussed.