• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.101-115
• /
• 2018

This study was carried out to evaluate the effects of various filter conditions on unconfined aquifer (alluvial aquifer). We made model test device which has filter layer, pumping well and observation well which consist of sand layer and gravel layer to test. Step drawdown test and long term pumping tests were carried out using the device. The permeability characteristics of each test group were confirmed and the optimal yield was calculated. As a result of comparing the optimal yield of double filter and single filter in sand, dual-filter SD-300 was valued at 216.8 % higher final optimal yield than single-filter SS-300. Comparing the dual filter SD-300 and the single filter SS-100 with a thin filter layer, dual-filter SD-300 was valued at 709.2% higher final optimal yield than single-filter SS-300. As a result of analysis of optimal yield change over time, It was confirmed that the ratio of optimal yield of single filter and dual filter increase over time. In order to evaluate the long-term change in water intake efficiency, we considered the point at which the initial optimal yield was reduced by 50%. The dual filter SD-300 is about 351.1% higher than SS-300, which is the same thickness filter, and about 579.0% higher than SS-100. From these results, Assuming that the point at which the initial quantity of water intake is reduced to 50% is the well life, double filters are expected to increase their lifespan by about 3.5 times over single filters of the same thickness and by about 5.8 times over typical single filter. These results can be used to design wells to river bank filtration or filtered seawater. In addition, it is possible to clarify the effect of the double filter through the comparison with the future field test results.

• Archives of design research
• /
• v.11 no.2
• /
• pp.129-140
• /
• 1998

This study aimed to grqJe for and present guideline roodel when the qJerator of domestic small manufacturing industry try to introch1ce the first industrial design by easier and more effective method. As the method of study, first of aiL examined the necessary of introducing industrial design throogh coosidering about the role and importance of small business. And next, analysed and examined the result of researching by enquete that is for qJerators of cbnestic small business. As a result, preconditioos for effective introducing industrial design were found. And, based 00 the preconditioos that were found through researching by enquete, examined the approachable introducing methods. Finally, set up the effectivable introducing methods of industrial design for doo1estic small manufacturing industry as a graphical model. As a result of study, First, the operator of small business who try to introduce industrial design needs to be well aware of these six cooditions as a prenise of effective awroach.1) coosciousness of role and versus a nation and a people of own industry Cereative 2) managing coosideratim and examinatim of a necessity of introducing industrial design as a cata1yst 3) A certain understanding aIntt essence and value of industrial design 4) Study and examinatim about a case of sucessful introducing industrial design arxl common introducing method of small business.5) Befarehand examinatim of introducing method making use of professional design organization and consultatim wicket 6) Prodent examination about the appointlrent puprpose, method of designer and infonmtion about designer. Second, as the position of small bnsiness that introduce industrial design fur the first time, it is confirmed that the aroroach going with introducing types - preliminary introducing, partitial introducing, regular introducing, whole industry level introducing - considered necessity rate of introducing industrial design and introducing range at the same time. This method is able to approach step by step, but it is confinmed that there is a characteristic in being able to select the method freely, and understanding easily for being coostructed visual form.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.430-436
• /
• 2018

This study aimed to analyze charantin and lutein from fresh bitter melon (FBM) for their antioxidant and ${\alpha}$-glucosidase inhibitory activities. We subsequently compared our results with charantin and lutein content of pickled bitter melon (PBM11, PBM13, PBM51, and PBM53), obtained by brining (1 and 5% salt) and blanching (1 and 3 min). Charantin, lutein, $\text\tiny{L}$-ascorbic acid, and total polyphenolic content in FBM were $777.92{\pm}27.59$, $16.87{\pm}2.07$, $94.78{\pm}0.61$, and $22.07{\pm}0.74mg$ catechin equivalents/g on dry basis, respectively. Antioxidant activity of 5 mg/L FBM extract was $31.76{\pm}0.42%$ in ABTS assay and $56.19{\pm}2.39%$ in DPPH assay; ${\alpha}$-glucosidase inhibitory activity of 0.5 mg/L FBM extract was $55.60{\pm}1.34%$. Charantin and lutein content of all PBM samples were higher than control without brining and blanching treatments, those in PBM53 being $375.63{\pm}9.03$ and $4.07{\pm}0.40mg/100g$, respectively. These showed that brining and blanching in pickling process were very effective in retaining charantin and lutein in bitter melon.

• Journal of Life Science
• /
• v.24 no.11
• /
• pp.1157-1167
• /
• 2014

In order to compare the anti-inflammatory effects of five selected cereal grains-proso millet, hwanggeumchal sorghum, foxtail millet, barnyard millet, and adlay-the inhibitory activities of 80% ethanol (EtOH) extracts obtained from the individual grains on lipopolysaccharide (LPS)-induced nitric oxide (NO) generation were investigated in RAW264.7 cells. The EtOH extract of barnyard millet (Echinochloa crus-galli var. frumentacea) grains exhibited more potent anti-inflammatory activity than that of the other grains. When the EtOH extract of barnyard millet grains was sequentially fractionated with n-hexane, methylene chloride (MC), ethyl acetate (EtOAc), and n-butanol, the majority of the anti-inflammatory activity was detected in the MC fraction, followed by the EtOAc fraction. Pretreatment with the MC fraction caused downregulation of the expression levels of iNOS- and COX-2-specific transcripts and proteins, as well as proinflammatory cytokine gene transcripts (IL-$1{\beta}$, IL-6, and TNF-${\alpha}$) in LPS-stimulated RAW264.7 cells. Additionally, the MC fraction could suppress not only the LPS-induced nuclear translocation of cytosolic NF-kB, but also the LPS-induced activation of MAPKs, such as ERK, JNK, and p38MAPK. Further analysis of the MC fraction by HPLC identified kaempferol, biochanin A, and formononetin as the major phenolic components. Both kaempferol and biochanin A, but not formononetin, could exert anti-inflammatory effect at the same concentrations as those of the MC fraction. Consequently, these results indicate that kaempferol and biochanin A are among the most effective anti-inflammatory phenolic components in barnyard millet grains. This finding suggests that barnyard millet grains and the MC extract enriched in kaempferol and biochanin A could be beneficial functional food sources that have an anti-inflammatory effect.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.704-715
• /
• 2002

This study intended to compare dietary and snack habits of primary students in the schools providing and non-providing lunch to clarify the correlation between those conditions and the occurrence of dental caries. Furthermore, this study also focused on evaluating educational effects by providing children with nutritional education program. 1. As a result of dietary habit analysis, it was found that children from the school providing lunch were better in terms of breakfast regularity, eating speed. optimum amount of intake, and meal time regularity than those from the school non-providing lunch. In particular, it was noted that children from the school providing lunch took a little more meat, fish, seaweed and milk or dairy products than those from school non-providing lunch. Thus, it could be assumed hat children provided with lunch have more reasonable dietary habit than those without lunch program. In general, it was found that there was a slight positive change in children's dietary habit after nutritional instruction than before, suggesting that the nutritional education had effects on improving their dietary habit. 2. It was found that primary students often took snacks causing dental caries such as caramel, chocolate, sweets and biscuits, and children from the school providing lunch were more willing to reduce those snacks upon recognizing the causes of dental caries than those from the school non-providing lunch. For the children who chewed gum with physical cleansing effects, it was shown that the highest frequency wat twice or three times a week. Moreover, the ratio of children who took snacks following dinner which might affect their dental caries and the ratio of children who selected snacks because of TV commercial were both reduced after nutritional education. Also the consumption of detergent foods like vegetable, fruit, protein. seaweed. milk or dietary products after nutritional education was increased. 3. It was found that children from the school providing lunch took more often all food groups except for food group IV affecting dental caries than those from the school non-providing lunch. The average number of consuming foods which cause dental caries was 5.04 times per person a day, and most of those were rather taken by liquid than solid food. The average eating times of rinsing foods which kill the bacteria on the surface of teeth and prevent from dental caries, was 9.33 for a person a day, which was a little higher than recommended time. Exposed time for dental caries for a person a day was 100.9 min, of which liquid dental caries was 56.2 min and solid dental caries was 44.6 min, suggesting that liquid food had a high potential to cause dental caries.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.823-828
• /
• 2006

We established the optimal conditions for the hot water extraction of Camellia japonica compounds based on the yield, the stability (observed by peak changes on an HPLC chromatogram), and the 1,1-diphenyl-1-picrylhydrazyl radical-scavenging activity of the extracts. The extracts were prepared at $90^{\circ}C$ using six solution volumes (ranging from 100 mL to 600 mL), and four different extraction times (10, 30, 60, and 120 min). The results showed that increasing of the extraction volume elevated the radical-scavenging activity of the extracts; however, changes in volume had minimal affects on their yields and their stabilities. An increase in extraction time improved the compound yield; however, it reduced their stability and increased the deterioration of their radical-scavenging activity. Based on our results, we propose the following conditions to be optimal for the hot water extraction of dried C. japonica leaves: a water volume (mL) that is 60 times the weight (g) of the sample at a temperature of $90^{\circ}C$ for 30 min.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.65-76
• /
• 2010

Purpose: he use of PET scanners and the number of patient in Korea have been increased for recent several years dramatically. For this reason, technologists have more possibilities to be exposed to the radiation. The hospitals using PET scanners should make an effort to reduce the radiation exposure dose. The purpose of this study was to evaluate the radiation exposure does when using radiation shielding devices. The evaluation was performed through questionnaire survey and experiment. Materials and Methods: First, the technologists who had experience working in PET center in 2008-2009 were surveyed with questionnaire and TLD Figures, personal opinion of utilization of radiation shielding devices are analyzed. Second, we measured the shielding rate of shielding devices which have been using in PET study procedures. We divided the procedures into four steps; distribution, moving, injection of $^{18}F$-FDG and patient setup. Results: First, the results of this survey, using of L-block+Syringe shield, L-block, Syringe shield, No shield during the injection, were each 58.5%, 20%, 9%, 12.3%. The TLD values according to utilization of radiation shield, using both L-block+Syringe Shield and L-block showed the lower TLD values, and Syringe shield only or No shield showed the higher TLD values. Second, the results of experiments according to PET study procedures measured the shielding rates as follows. The shielding rates during the distribution using L-block, L-block+Apron shield were measured 97.4%, 97.7%. The shielding rates during the $^{18}F$-FDG delivery to the injection room using mobile Syringe shield, Syringe holder, Syringe shield carrier were each 81.7%, 98.9%, 99.7%. The shielding rates during the injection using Syringe shield, L-block, L-block+Syringe shield were measured each 51.9%, 98.3%, 98.7%. The shielding rates of Apron were measured in each 30, 60, 90, 120, 150 cm distance. The measurement were each 16.9%, 14.2%, 16.6%, 17.1%, 18.1%, 18.6%. Conclusion: The most effective method for radiation shielding is to using L-block during the $^{18}F$-FDG distribution and Syringe shield carrier during in moving $^{18}F$-FDG. For the $^{18}F$-FDG injection, L-block+Syringe shield have to be used. The shielding effect of Apron has shown average 16.4%. According to the survey of questionnaire, the operators recognized well risk of the radiation exposure but, tended ignore in working. The radiation dose according to recognition of radiation exposure risk was not relevant. but radiation dose according to utilization of radiation shield lower the more use it. The main reason of no use of shielding devices is cumbersome, 55% of the respondents answered. I'm sure, by use of radiation shield in all PET procedure, radiation exposure will be reduced considerably.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.229-238
• /
• 2004

Purpose: This study was perfonned to elucidate the clinical pictures of acute focal bacterial nephritis(nephronia) in children. Methods: We reviewed 9 children with nephronia diagnosed by ultrasonography or computed tomography of kidneys from September 1994 to August 2004. Results: The overall male to female ratio was 2:1, and the age distribution ranged from 0.1 to 6 years(mean $2.8{\pm}2.2$). The cardinal symptoms were fever, chills, abdominal pain and dysuria/frequency. The initial leukocyte count was $21,000{\pm}5,600/uL$, ESR $60{\pm}23mm/hr$, CRP $17{\pm}10\;mg/dl$. Pyuria was noted in every patient and persisted for $10.5{\pm}7.8$ days after antimicrobial treatment. Abdominal sonography demonstrated focal lesion of ill-defined margin and low echogenicity in 5 of 9 patients(55.6%), while computed tomography revealed nonenhancing low density area in all patients(100%). Three of 9 patients(33.3%) had vesicoureteral reflux, greater than grade III. The initial $^{99m}Tc-DMSA$ scan showed one or multiple cortical defects in every patient, and improvements were noted in 2(33.3%) of 6 patients who received follow up scan after 4 months. Intravenous antibiotics was given in every patient under admission. Total febrile period was $11.8{\pm}6.3$ days(pre-admission, $4.0{\pm}3.0;$ post-admission, $7.8{\pm}5.5$ days) and the patients needed hospitalization for $17.2{\pm}8.1$ days. Conclusion: For the early diagnosis of 'acute focal bacterial nephritis' we should perform renal computed tomography first rather than ultrasonography, when the child has toxic symptoms and severe inflammatory responses in blood and urine.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.279-286
• /
• 2009

An experiment was conducted to investigate the effects of dietary supplementation of cerium (Ce), a rare earth, individually and in combination with lanthanium (La), a rare earth, in the basal diet on growth performance, nutrient digestibility, bone composition, breast meat composition, carcass characteristics and meat color in broiler chicks. A total of 1,600 day-old broiler chicks were randomly allotted to four dietary treatments with four replicates in a completely randomized block design. Treatments were T1) CON (control diet), T2) 100 ppm Ce, T3) 100 ppm La, T4) 100 ppm Ce+100 ppm La. There were no significant differences in feed intake among dietary treatments during the whole experimental period (0 to 5 weeks). Body weight gain for the first three weeks was greater in birds T4 than birds fed T3 diet. Feed conversion ratio (FCR) was better in birds fed T4 diet (p<0.05) than birds fed T3 diet during 0~3 weeks, and better FCR for 0~5 weeks was noticed in birds fed T4 diet than birds fed T1 diet. Nutrient digestibility was greatest in birds fed T3 diet (p<0.05) compared with other treatments. Bone composition, carcass characteristics and meat color were no statistically different among the treatments. These results suggest that Ce supplementation, alone and combination with La could improve performance of broilers.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.438-447
• /
• 2017

Flowering is one of the most important development traits related to the production of Brassica rapa crops. After planting, a sudden low temperature triggers premature flowering, which leads to a reduction in the yield and quality of harvested production. Therefore, understanding the mechanism of flowering control is important in the agricultural productivity for preventing Brassica rapa crops. Vernalization is generally known as the main factor of flowering in the Brassica plant. However, in the subspecies of Brassica rapa, some accession such as Yellow sarson and Komatsuna display the flowering phenotype without vernalization. Circadian genes, which diurnally regulate plant physiology, have a role for photoperiodic flowering but are related to the regulation of the vernalizarion mechanism. In this report, the 22 B. rapa accession were divided into two groups, vernalization and non-vernalization, and the sequenced circadian gene, BrPRR1s. Among them, the BrPRR1b gene was found to have deletion regions, which could classify the two groups. The PCR primer was designed to amplify a short band of 422bp in the vernalization type and a long band of 451bp in the non-vernalization type. This primer set was applied to distinguish the flowering types in the 43 B. rapa accession and 4 Brassica genus crop, Broccoli, cabbage, mustard, and rape. The PCR analysis results and flowering time information of each crop demonstrated that the primer set can be used as marker to discern the flowering type in Brassica crops. This marker system can be applied to the B. rapa breeding when selecting the flowering character of new progenies or introducing varieties at an early stage. In addition, these results displayed that the circadian clock genes can be a good strategy for the flowering control of B. rapa crops.