• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.573-580
• /
• 2009

This paper presents the mix composition, production method, and curing condition applied to the extruded ECC(Engineered Cementitious Composite) panel which are able to exhibit multiple cracking and potential pseudo strain-hardening behavior. In addition to the production technique of extruded ECC panel, the effect of fiber distribution characteristics, which are uniquely created by applying extrusion process, on the flexural behavior of the panel is also focussed. In order to demonstrate fiber distribution, a series of experiments and analyses, including image processing/analysis and micro-mechanical analysis, was performed. The optimum mix composition of extruded ECC panel was determined in terms of water matrix ratio, the amount of cement, ECC powder, and silica powder. It was found that flexural behavior of extruded ECC panel was highly affected by the slight difference in mix composition of ECC panel. This is mainly because the difference in mix composition results in the change of micro-mechanical properties as well as fiber distribution characteristics, represented by fiber dispersion and orientation. In terms of the average fiber orientation, the fiber distribution was found to be similar to the assumption of two dimensional random distribution, irrespective of mix composition. In contrast, the probability density function for fiber orientation was measured to be quite different depending on the mix composition.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.235-240
• /
• 1991

Starch phosphates were prepared from the corn starch mixed with 2% sodium tripolyphosphate by twin-screw extruder with a feed rate of 20 kg/hr and an extrusion temperature of $130^{\circ}C$, and the effects of extrusion variables on the physicochemical properties (target parameters) of starch phosphates were investigated. Interrelations of system parameters (specific mechanical energy and extrudate moisture) and rheological properities of starch was analyzed by using the response surface analysis. Degree of substitution (DS) was increased with increasing the feed moisture, and showed the maximum value at the screw of near 250 rpm, Degree of gelatinization was proportionally increased with increasing the screw speed and decreasing the feed moisture. Apparent viscosity of the paste was increased with increasing the feed moisture, but it was not significantly affected by the screw speed. It was found by scanning electron microscopy that the starch microgranules were much more degradaded, and as consequent result, the intrinsic viscosity was decreased, whereas, water solubility index was increased. The rate of retrogradation of the gels was retarded with increasing DS and decreasing viscosity.

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.93-96
• /
• 2010

We describe a case of enterolithiasis in an eight-year-old male Grant's zebra (Equus burchelli boehmi) that died after a 10-day history of depression, anorexia, dehydration and colic. On necropsy, an enterolith was discovered at the conjunction of the descending colon and the rectum. The spherical enterolith weighed 1,660 g and was $13.5cm{\times}8cm$ in size. According to scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), the nidus consisted primarily of $SiO_2$ with outer layers of magnesium and phosphate. The formation of enteroliths is closely related to diet. We suggest that this captive zebra's diet, which consisted primarily of alfalfa hay with mineral supplements, was the cause of enterolithiasis in this case. This is the first report of enterolithiasis in a captive equid in Korea. Our findings provide information valuable for the development of dietary guidelines to prevent enterolithiasis in captive wild equids.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.335-345
• /
• 2009

This paper presents investigations on 60 glass beads excavated from floorless tombs of Eunpyeong Newtown site to figure out composition and lead isotope ratio by SEM-EDS and TIMS, which show the difference between their compositions and Pb provenance of lead glass. The results of the composition analysis are that excavated glass are mainly divided into Potash glass($K_2O$-CaO-$SiO_2$) and Potash-lead glass($K_2O$-PbO-$SiO_2$) and the samples excavated from III-3 floorless tombs No.1005 are presumed not glass but Quartz. The transparent 9 lead glasses excavated from II-3 floorless tomb No.101 and III-3 floorless tomb No.908 seem to be manufactured by the same raw material at same site because the concentration of their compositions are well accorded with each other and deviations of them are very limited. As a result of principal component analysis(PCA), glass beads excavated are largely assort to two groups, Potash glass and Potash lead glass as well. That is, glass beads excavated from Eunpyeoung Newtown sites are quite different two types of main composition. In addition, the results of Pb provenance analysis used in lead glass confirm that most lead glass are significantly correlated with galena of northern China.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.139-145
• /
• 2011

Parthenocissus tricuspidata is an epiphyte that lacks a main axial stem, but develops adhesive disks along the stem for climbing support. In this study, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) were utilized to examine the brick wall surface and the adhesive disks of P. tricuspidata that attached to the surface successfully. The study was mainly focused the outermost layers of both structures before and after adhesion to find out whether there has been some structural and/or physical interactions between the two. The adhesive disks adhered firmly to the brick wall by secreting adhesive materials that help them for a tight attachment to the surface. The rough wall surface appeared facilitating better attachment of the adhesive disks by infiltrating the materials into those spaces leading to some degree of interactions at the interface. EDS analysis on the outermost layers of the adhesive disks that were separated from the substrates was also consistent with the SEM data on the interaction between the adhesive disks and the substrate surface. EDS analysis of the brick wall surface and the adhesive disks demonstrated similar elements of O, Si, Fe, Al, K, Mg, and Na in their components.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.350-355
• /
• 2006

선진 전력시장의 경우, 전력산업의 환경변화에 따라 소비자의 역할이 증대되고 있으며 이와 더불어 IT 기반의 다양한 소비자 중심의 전력부가서비스의 개발이 시도되고 있거나 일부 제공되고 있다. 이러한 서비스의 발전은 시간이 흐르면서 단방향이 아닌 양방향 통신 기반의 소비자 중심 서비스에 대한 연구로 확대되고 있다. 특히, 미국 EPRI의 IntelliGrid 컨소시엄에서 제시한 수용가 포탈 시스템은 소비자 영역내의 장비와 에너지 서비스 기관 간의 양방향 통신을 전제함으로써 이루어지는 통합적인 개념의 서비스 기반으로써, 공급자를 포함한 ESP(Energy Service Provider)와 소비자는 수용가 포탈을 기반으로 원활한 커뮤니케이션을 수행하고 그 결과를 이용한 부가적 이익을 누릴 수 있게 된다. 이에 비해 국내의 전력부가서비스 제공 수준은 이제 겨우 시작 단계에 불과하지만, 서비스에 대한 인식 정도와 IT기술의 발전 속도를 생각해 본다면 머지않아 국내 전력산업에서도 현재의 서비스 제공 수준을 한 단계 넘어선 양방향 통신 기반의 수준 높은 전력부가서비스를 요구하게 될 것이다. 따라서, 국내 환경에 적합한 수용가 포탈 시스템 기반의 전력부가서비스 창출은 수용가에게는 비용 절감이 가능한 합리적인 소비를 제시하고, ESP(Energy Service Provider)에게는 부하·수요관리 및 투자비를 절감할 수 있는 기회를 제공해야 할 것이다. 본 논문에서는 새로운 전력부가서비스 기반인 수용가 포탈시스템을 분석하고, 현행 전력부가서비스의 현황과 동향 분석, 적용가능 기술 분석, 타 산업 벤치마킹을 통해 국내환경에 적합한 수용가 포탈 시스템 기반의 전력부가서비스 선정 및 구축 방안을 제시하고자 한다.원 사용이 가능하도록 설계하였다.서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.165-178
• /
• 2013

This study is for the genetic differences of two closed asbestos mines from Jeongjeon and Ocheon areas in Boryoung, Chungnam. They are mined asbestos for past several decades. Host rocks are serpentinites for Jeongjeon mine and dolomites for Ocheon mine. Asbestos samples and their host rocks are collected from the field trips and examined with microscopes and FESEM, and analysed with XRD and EDX to confirm for the type and/or compositions of the minerals. The asbestos occur as layers, cracks and fractures assummed as a pathway of the hydrothermal water, but show different characteristics. The serpentinites from the Jeongjeon mine contain chrysotile, tremolite and actinolite asbestos. Non-asbestos minerals including tremolite and actinolite were also found. The chrysotiles occur as a cross fiber or slip fiber at veins and along cracks of several mm to cm thickness. Tremolite and actinolite asbestos occur along cracks and fractures of several cm to ten cm thickness. It suggests that the asbestos from Jeongjeon area were formed by the reactions between serpentinite and hydrothermal water. The dolomites of the Ocheon mine only contain tremolite and actinolite asbestos. The asbestos occur along layers, cracks and fractures, suggestive of asbestos from Ocheon area formed by the reactions between dolomite and hydrothermal waters influxed along layers, cracks and fractures. Overall results suggest that two asbestos mines showing different host rocks are located in a Boryoung area. They show a different type of asbestos minerals, reflecting variety of petrogeneses.

• The Journal of Engineering Geology
• /
• v.22 no.4
• /
• pp.459-466
• /
• 2012

A difficulty encountered in engineering seismic mapping is that reflection events from shallow discontinuities are commonly overlapped with coherent noise such as air wave, direct waves, head waves, and high-amplitude surface waves. Here, the radial trace transform, a simple geometric re-mapping of a trace gather (x-t domain) to another trace gather (v-t domain), is applied to investigate the rejection effect of coherent linear noises. Two different types of data sets were selected as a representative database: good-quality data for intermediate sounding (hundreds of meters) in a sedimentary basin and very noisy data for shallow (${\leq}50m$) mapping of the weathered zone and bedrock surface. Results obtained with cascaded application of the radial transform and low-cut filtering proved to be as good as, or better than, those produced using f-k filtering, and were especially effective for air wave and direct wave. This simple transform enables better understanding of the characteristics of various types of noise in the RT domain, and can be generally applied to overcoming diffractions and back-scatterings caused by joints, fractures, and faults commonly that are encountered in geotechnical problems.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.502-507
• /
• 2016

This study was conducted to develop novel antimicrobial nano-composites, with the aim of fully utilizing antimicrobial properties of multi-walled carbon nanotubes (MWCNTs), nickel (Ni) and zinc oxide (ZnO). Ni coated-MWCNTs (Ni-CNT) were prepared and evaluated for their potential application as an antimicrobial material for inactivating bacteria. Field emission scanning electron microscopy (FE-SEM), and X-ray energy dispersive spectroscopy (EDS) were used to characterize the Ni coating and morphology of Ni-CNT. Staphylococcus aureus (S. aureus) and Escherichia coil (E. coil) were employed as the target bacterium on antimicrobial activities. Comparing with the nitric acid treated MWCNTs and Ni-CNT which have been previously reported to possess antimicrobial activity towards S. aureus and E. coil, Ni-CNT/ZnO exhibited a stronger antimicrobial ability. The nickel coating was confirmed to play an important role in the bactericidal action of Ni-CNTs/ZnO composites. Also, the addition of ZnO to the developed nanocomposite is suggested to improve the antimicrobial property.

• Clean Technology
• /
• v.17 no.4
• /
• pp.389-394
• /
• 2011

A compact adsorption-based process for removal of carbon dioxide and nitrogen from natural gas has been discussed. Among the adsorption-based processes, especially, the pressure swing adsorption (PSA) process has been a suitable unit operation for the purification and separation of gas because of low operation energy and cost. A step cycle is made up of pressurization, feed, equalization, blowdown and rinse. In this work, the PSA process is composed of zeolite 13X and carbon molecular sieve (CMS) for removal of carbon dioxide and nitrogen from mixed gas containing $CH_4/CO_2/N_2$ (75:21:4 vol%). A CMS selectively removes carbon dioxide and a zeolite 13X separates nitrogen from methane. CMS is investigated experimentally due to the high throughput of the faster diffusing component ($CO_2$). The gas composition of top, bottom and feed tank was measured with the gas chromatography (GC) using TCD detector, helium as carrier gas and packed column for analysis of methane, carbon dioxide, and nitrogen.