• Journal of ILASS-Korea
• /
• v.27 no.1
• /
• pp.36-41
• /
• 2022

In this study, the combustion instability characteristics according to the change in the hydrogen ratio in the fuel in the single nozzle system of the hydrogen-natural gas mixed gas turbine for power generation was analyzed using a three-dimensional finite element analysis-based Helmholtz solver. This combustor shows the instability characteristics in which mode transition occurs from a mode having a low amplitude near 70 Hz to a mode having a high amplitude of 250 Hz or higher as the hydrogen fraction in the fuel increases. The current modeling results are found to reasonably predict the main characteristics of the change in measured instability frequency and growth rate with the change in fuel composition.

• Resources Recycling
• /
• v.9 no.5
• /
• pp.28-32
• /
• 2000

In this study, the new processing method to produce magnetite for mono-component black toner was studied using spray roaster. The produced magnetite is compared with TMB 125 made by Magnox, USA. When the weight ratio of the ferrous chloride and the ferric chloride is varied from 3:7~7:3 under $N_2$ atmosphere, the 100% major phase of magnetite is obtained. However, when the content of he ferrous chloride is higher than 70wt%, the content of FeO is increased. The phase of $\Gamma-Fe_2O_3$ is shown in th range of over 70wt% of the ferric chloride. The magnetite produced by spray roasting has a saturation magnetization of 80~85 emu/g and a coercivity of 110~130 Oe. The shape of the particle is irregular sphere and hte size of the magnetite is the range of $0.3~0.5\mu\textrm{m}$. It is shown that the magnetite made by spary roasting is enough to apply to the magnetic material of toner.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.272-278
• /
• 2003

$Bi_4Ti_3O_{12}$ (BIT) and $(Bi_{3.25}La_{0.75})(Ti_{2.97}V_{0.03})O_{12}$ (BLTV) thin films were deposited on ITO/glass substrates by metal organic chemical vapor deposition (MOCVD) using ultrasonic spraying. After deposition of the films in oxygen atmosphere for 30 min, the films were heated by rapid thermal annealing (RTA) method, especially direct insertion, at various temperatures. The films were investigated on phase formation temperature, microstructure and electrical properties. From x-ray diffraction (XRD) patterns, the perovskite phase formation temperature of BLTV thin film was about $600^{\circ}C$ which was lower than that of BIT, $650^{\circ}C$. The leakage current of the BLTV thin film was measured to be $1.52\times 10^{-9}$A/$cm^2$ at an applied voltage of 1 V. The remanent polarization (Pr) and coercive field (Ec) values of the BLTV film deposited at $650^{\circ}C$ were $5.6\muC/cm^2$ and 96.5 kV/cm, respectively.

• Particle and aerosol research
• /
• v.13 no.4
• /
• pp.151-158
• /
• 2017

Electrostatic precipitator is widely used to remove particulate matters in indoor air and industrial flue gas due to low pressure drop and high collection efficiency. However, it has a low collection efficiency for the submicrometer sized particles. Electrospraying is a potential method to increase the particle charging efficiency, which results in increased collection efficiency. Although particle charging efficiency is highly dependent upon droplet size, the effective measuring method of the droplets is still uncertain. Tap water was electrosprayed in this study, and the images of electrosprayed droplets were taken with a high speed camera coupled with several visualization methods in order to measure the droplets size. The droplet size distribution was determined by an image processing with an image-J program. As a result, a droplet measured by a laser visualization, had a half size of that by a Xenon light visualization. In addition, the experimentally measured droplet sizes were a good agreement with the predicted values suggested by $Fern{\acute{a}}ndez$ de la Mora and Loscertales(1994).

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.192-192
• /
• 2013

하이브리드 표면처리는 다른 표면처리법을 동시 또는 연속적으로 행하여 단일표면처리에 비해 더욱 우수한 특성을 부여시키기 위한 표면처리법이다. 본 연구는 붕소와 질소 원소를 이용한 하이브리드 표면처리를 오스테나이트계 스테인리스강인 STS 316L 소재에 적용하여 변화된 특성을 평가하였다. 본 실험에 사용된 하이브리드 표면처리법으로는 붕소분말을 이용한 보로나이징처리와 활성스크린을 이용한 이온질화처리법을 적용하였다. 하이브리드 표면처리된 STS 316L시편은 FE-SEM을 이용하여 표면형상 및 단면조직을 관찰하였으며 GDS와 XRD를 이용하여 깊이에 따른 원소 및 상분석을 실시하였다. 또한 마이크로비커스 경도계와 마모시험기를 이용하여 경도와 마모특성을 측정하였고, 염수분무시험을 통하여 해수환경에서 부식거동을 평가하였다.

• Korean journal of applied entomology
• /
• v.26 no.2 s.71
• /
• pp.83-88
• /
• 1987

Differences in susceptibility of several organophosphate, carbamate and pyrethroid insecticides to three species of aphids were determined by leaf-dipping and spray methods. The insects tested were the apterous adults of the green peach aphid (Myzus persicae), cotton aphid (Aphis gossypii) and soybean aphid (Aphis glycines). The comparison of $LC_{50}$ levels was indicated as follows; (1) The susceptibility to insecticides tested were greatly varied with the test methods. (2) The leaf dipping method is more recommendable than the spray method for insecticide screening with aphids. It was easier, more accurate and less variable than the latter. (3) The susceptibility to insecticides was greatly varied between the aphid species. Soybean aphid was more susceptible to the insecticides than green peach aphid and cotton aphid. Exceptionally, pirimicarb was not effective on the cotton aphid.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.454-460
• /
• 2019

The purpose of this study is to analyze the distribution characteristics of mist spray particle size by devising a rotary mist spraying device to develop the evaporative salt water desalination system. The rotary mist spraying device was consisted of a BLDC sirocco fan, a spinning fan, a fan fixed shaft and a salt water supply device etc. In this study we analyzed the characteristics of spray particle size and distribution according to the variation of sirocco fan surface roughness(Ra, ${\mu}m$), revolutions(rpm) and salt water flow rate(mL/min). When sirocco fan surface roughness(Ra) was in the range of $0.27{\sim}7.65{\mu}m$, the spray particle size was $0.117{\sim}1.360{\mu}m$. And then more than 90% of spray particles were found to be less than $0.50{\mu}m$. When sirocco fan surface roughness(Ra) was in the range of $12.70{\sim}22.84{\mu}m$, the spray particle size was $2.51{\sim}184.79{\mu}m$ and more than 98% of spray particles were found to be less than $13.59{\mu}m$. To analyze the effect of fan rotation speed on the size and distribution of spray particles, when surface roughness Ra was fixed $0.27{\mu}m$ and fan rotation speed and salt water flow rate was respectively changed at 3,800~5,600 rpm and 2.77~8.28 mL/min, spray particle size was $0.314{\sim}0.541{\mu}m$. And when salt water flow rate was 9.74 mL/min and fan rotation speed was 3,800~5,200 rpm, spray particle size was in the range of $29.29{\sim}341.46{\mu}m$ and in case of 5,600 rpm more than 98.23% of spray particles were in the range of $2.51{\sim}13.59{\mu}m$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.73-77
• /
• 2020

In this study, phosphor ceramics were fabricated, and optical properties were analyzed for application to nextgeneration automotive laser headlamps by using a spherical YAG : Ce phosphor with a garnet structure synthesized based on the spray drying method. The thickness of phosphor ceramic using spherical YAG : Ce phosphor was obtained with 100 ㎛, 150 ㎛, and 200 ㎛ to investigate the effect of thickness on optical properties such as light conversion efficiency, heat dissipation, luminance and color temperature. The results of this study are expected to play a significant role in the manufacturing process for the fabrication of phosphor ceramic by solving issues such as the high cost and low yield in the conventional liquid method to manufacture YAG : Ce nano fluorescent materials.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.05a
• /
• pp.73-82
• /
• 2003

본 연구에서는 국내 종계의 생산성 저하요인들을 평가·분석하였으며, 국내사육 종계의 실질적인 생산성을 극대화 시킬 수 있는 방안을 제시하고자 시험을 수행하여 다음과 같은 결론을 얻었다. 1. 혈청검색에 의한 품종별 종게군 질병 모니터링을 실시 한 결과, SE, MS 등 2종의 난계대성 세균성 질병과 REV, APV, CAV, ORT, REO 등 5종의 만성소모성 질병을 유발하는 질병이 종계군의 산란기에 감염되어 이들이 단독 또는 중복감염되어 나타나는 피해가 예상되었으며, 이들의 감염을 효과적으로 예방 할 수 있는 백신의 개발 및 도입의 필요성이 대두되었다. 2. 집중관리 모니터링 대상농장에 대한 ND, IB, IBD 등 3종의 생독백신에 대한 접종효능을 평가해 본 결과 산란종계, 육용종계를 막론하고 전반적으로 니플급수기를 이용한 음수접종법 적용시 5주령 이하 계군에 2내지 3회의 음수접종을 실시하였음에도 불구하고 항체가 거의 형성되지 못하거나 매우 불균일한 면역반응이 나타나는 것으로 조사되어 국내 야외농장에 대한 분무접종 유도 등 기존의 백신접종법에 대한 시급한 개선대책 마련이 요구되었다. 3. 육성기 및 산란기 종계 질병·위생관리 프로그램 확립을 위하여 ND, IB, IBD에 대한 개선된 백신접종 프로그램을 모델계군에 적용한 후, 주령별로 생독백신 접종효능을 조사한 결과 백신접종 후 ND, IB, IBD에 대한 평균 항체가와 항체의 균일도 (%CV)가 표준 목표치 이상 상승하여 개선의 효과를 볼 수 있었다. 4. 산란기 종계 질병·위생관리 프로그램 확립을 위하여 실시된 변이형 IB에 대한 방어능 시험결과 정기적인 Mass type IB 생독백신의 분무접종은 국내 유행 호흡기형 IBV 유전형 VI에 대한 방어효과는 다소 떨어지는 것으로 조사되어 국내분리주를 이용한 IB 생독백신의 개발이 요구되었다. 5. 종계장 살모넬라 및 마이코플라즈마 조기 검출을 위하여 실시한 종계장 살모넬라 및 마이코플라즈마 환경 모니터링 실시 결과 기존의 평판응집반응이나 ELISA에 의한 혈청검색법에 비하여 검출효율이 매우 높은 것으로 조사되어 향후 국내 종게군에 대한 살모넬라 및 마이코플라즈마 조기검출과 방제연구에 큰 도움이 될 것으로 사료되었다.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1147-1155
• /
• 1996

In the spray drying with rotating wheel atomizer of cheese powder, the relationships among variables were analyzed with Response Surface Methodology in which several independent variables such as total solid content, wheel rotation speed, and outlet temperature influenced dependent variables such as particle diameter, moisture content, bulk density, and viscosity of suspended liquid. Significance and correlation were tested according to central composite design. As a results of analyzing the correlations between independent and dependent variables, particle diameter and moisture content of cheese powder were decreased with increasing wheel rotation speed, and bulk density was decreased with increasing outlet temperature. Viscosity of suspended liquid were increased with increasing wheel rotation speed and total moisture content. In correlation among dependent variables, moisture content was proportional to bulk density, and particle diameter was inversly proportional to moisture content and bulk density.