• Title/Summary/Keyword: 분리력

Search Result 1,494, Processing Time 0.031 seconds

Development of screw attached corn drum type garlic separator (나선부착 원추 드럼식 마늘쪽 분리기 개발)

  • 이영희;조남홍;박종률;최승묵;조광환;김재규
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2002.02a
    • /
    • pp.317-322
    • /
    • 2002
  • 농가보급형 마늘쪽 분리기 개발을 위하여 마늘의 품종별 기하학적 특성을 분석하고, 나선 부착 원추 드럼식 마늘쪽 분리기를 제작하여 성능시험 및 농가 현장시험한 결과를 요약하면 다음과 같다. 1)종구용 통마늘의 크기를 조사한 결과 직경은 의성, 무안, 자봉이 각각 44.3, 51.9, 60.2mm로 나타났다. 2)통마늘의 최대 압축력 및 마늘쪽의 생물체항복 강도를 시험한 결과 수평방향 최대 압축력은 의성, 무안, 자봉마늘이 각각 185.1, 145.8, 148.5N이고, 마늘쪽의 생물체 항복강도는 의성, 무안, 자봉마늘이 각각 272.4, 336.2, 413.2N/$cm^2$로 통마늘은 의성종이 단단 하나 마늘쪽은 무안이나 자봉마늘에 비해 단단하지 않은 것으로 나타났다. 3)나선부착 원추 드럼 및 경사원통식 마늘쪽 분리장치를 제작하여 성능시험한 결과 1쪽 분리율이 의성, 무안, 자봉마늘에서 각각 58.2, 64.7, 95.2%이고, 손상율은 각각 2.0, 2.4, 1.9%이었으며 작업능률은 시간당 210kg(약 60접)이었다. 4)시작기를 전남무안의 재배농가에서 현장 시험한 결과 1쪽분리율은 75.9%, 손상율은 0.8%, 파종 후 출현율이 94.3%로 농가적응성 및 실용성이 높은 것으로 판단되었다.

  • PDF

의사결정나무에서 순서형 분리 변수 선택에 관한 연구

  • 김현중;송주미
    • Proceedings of the Korean Statistical Society Conference
    • /
    • 2004.11a
    • /
    • pp.283-288
    • /
    • 2004
  • 지금까지 의사결정나무에서 분리 변수의 선택에 관한 연구는 많았으나, 대부분 연속형 변수와 명목형 변수에 국한되어 왔다. 본 연구에서는 순서형 변수에 주목하여 CART, QUEST, CRUISE 등 기존 알고리즘과 본 연구에서 제안하는 비모수적 접근 방법인 K-S test, framer-von Misos test 방법의 변수 선택력을 비교하였다. 그 결과 본 연구에서 제안하는 framer-von Mises test 방법이 다른 알고리즘에 비하여, 변수 선택력과 안정성에 있어서 좋은 성과를 보였다.

  • PDF

Study of post-cyclone using CFD (Computational fluid dynamics) (CFD를 이용한 PoC부착 고효율 싸이클론에 관한 연구)

  • 조영민;이주열
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.431-432
    • /
    • 2001
  • 원심력을 이용한 대표적인 대기오염 방지 장치인 싸이클론은 1800년대 후반이래 공기나 배출가스로부터의 분진제거 및 입자분리에 폭 넓게 사용되어 왔다. 일반적으로 싸이클론은 간단한 구조로 되어 있으며, 조작이 용이하고 운전비용이 저렴할 뿐만 아니라 가혹조건에서의 사용이 가능하다는 장점이 있다 (Shepherd and Lapple, 1939). 입자의 관성력에 의해 분진을 분리하는 싸이클론으로서는 상대적으로 낮은 관성효과를 지니는 미세입자(주로 10$\mu\textrm{m}$ 이하)들에 대한 제어효율이 낮을 수 밖에 없다(Dirge and Leith, 1985). (중략)

  • PDF

Detent Force Analysis of Planar Motor Using 3-D FEM (3차원 유한요소 해석을 이용한 서피스 모터의 디텐트력 해석)

  • Im, Chang-Hwan;Cho, Han-Sam;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2000.11b
    • /
    • pp.244-246
    • /
    • 2000
  • x,y평면 위를 자유롭게 구동할 수 있는 서피스 모터(평면 모터)의 디텐트력을 3차원 유한요소 해석을 이용하여 해석한다. 고정자와 이동자를 분리하여 모델링을 하고 접하는 면을 주기 경계조건으로 처리하여 실제로 이동하지 않고도 이동을 고려할 수 있도록 하였다. 고정자와 이동자의 계수 행렬을 분리하여 영역 분할법을 적용하여 계산 시간을 단축하였다.

  • PDF

A Study on the Requirement of Frequency Regulation Reserve in Electricity Market (전력시장에서 주파수조정예비력 요구에 관한 연구)

  • Oh, Chang-Soo;Lee, Kang-Wan
    • Proceedings of the KIEE Conference
    • /
    • 2005.07a
    • /
    • pp.298-300
    • /
    • 2005
  • 전력계통의 주파수조정예비력(Frequency Regulation Control)은 부하 변동에 대응하여 규정된 주파수를 유지하고 안정된 전력계통 운영이 가능하도록 단시간 내에 응동할 수 있는 예비력이다. 본 논문은 우리나라 전력계통에 적합한 위와 같은 주파수조정예비력을 제시하고 전력산업 구조개편에 따라 분리된 발전사업자들이 전력시장에서 대부분의 주파수조정예비력을 담당하는 화력발전소 예비력 확보 방안을 연구 검토한 것이다.

  • PDF

Launch and On-orbit Environment Verification Test of Flight Model of Hinge Driving Type Holding and Release Mechanism based on the Burn Wire Release (열선분리방식을 이용한 힌지구동형 구속분리장치 비행모델의 발사 및 궤도환경 검증시험)

  • Lee, Myeong-Jae;Lee, Yong-Keun;Kang, Suk-Joo;Oh, Hyun-Ung
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.44 no.3
    • /
    • pp.274-280
    • /
    • 2016
  • Hinge driving type holding and release mechanism based on the burn wire release for application of cubesat is main payload of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) to be launched at 2015. It has high constraint force, low shock level as well as surmounting drawbacks of conventional nichrome burn wire release method that has relatively low constraint force and system complexity for application of multi-deployable systems. In this paper, we have proposed a flight model of holding and release mechanism for the verification of the constraint force and deployment status signal acquisition. To validate the effectiveness of the flight model, launch and on-orbit environment verification test have been performed.

A Study of Separartion Mechanism in Ball Type Bolt Used the Pressure Cartridge (압력카트리지를 이용한 볼타입 볼트 분리현상 연구)

  • Lee, Yeung-Jo;Koo, Song-Hae;Jang, Hong-Bin
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2008.11a
    • /
    • pp.293-296
    • /
    • 2008
  • Most of the guided weapons have been kept and transferred at the launching tube and fired in case of necessity in these day. Launching tube is a kind of case to protect the guided weapons from external environments and conducted as a guide when they are fired. When we attached the guided weapons to launching tube we usually has used explosive bolt. Explosive bolts have been used explosives when they had to be separated. But when they are separated there are some bad effects; a flame, fragments and pyro-shock. Because of these bad effects there are many restriction to use bolt as joining devices to precision guided weapons. To solve these problems, it has been invented ball type bolt. The present work was represented quantitively the margin of separation safty and separation mechanism in ball type bolt to analyse the dynamic separation test. Unlike explosive bolt, ball type bolt is separated without a flame, fragments and pyro-shock. And it also has a good mechanical properties as much as those of explosive bolt.

  • PDF

Application and Type of Magnetic Separator (자력선별장비의 유형과 활용)

  • Lee, Sang-hun;Yang, Injae;Choi, Seungjin;Park, Jayhyun
    • Resources Recycling
    • /
    • v.27 no.6
    • /
    • pp.11-22
    • /
    • 2018
  • Magnetic separators has been used in the mining and the recycling fields in general, and is still applied in wide variety of fields. It is classified into the equipments for separating coarse ferrous scrap from non-ferrous materials and the equipments for concentrating fine ferromagnetic particles below 3mm. Magnetic separation equipments for concentrating fine materials also falls into two categories of low intensity and high intensity magnetic separators. The former is used for ferromagnetic materials but also paramagnetic materials of high magnetic susceptibility, and the latter for paramagnetic materials of lower magnetic susceptibility. Both low and high intensity magnetic separators could be utilized either dry and wet. Recently, the High gradient magnetic separators(HGMS) used in the range of less than 0.7 tesla has been gradually replaced by the magnetic separator made of rare earth permanent magnets commercialized in the 1980s. In addition, the expansion of nanotechnology in terms of synthetic magnetic materials in the environmental and biological fields is expected to contribute positively to the development of magnetic separation technology.

제주민속 좁쌀약주 생산을 위한 균주선발

  • 김지용;임자훈;고정삼
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.199.1-199
    • /
    • 2003
  • 제주민속주인 좁쌀약주의 제조를 위하여 전국에서 수집된 35종의 누룩으로부터 우수 곰팡이와 효모를 분리하였다. 수집된 누룩의 균수는 곰팡이가 6.4$\times$105~107개, 효모는 1.4$\times$104~107개로 나타났고, 이 중에서 곰팡이 169균주, 효모 103균주를 분리하였으며 전분당화력이 좋은 곰팡이 16균주와 효모 1균주를 선발하였다. 이 중에서 전분당화 균주의 효소활성을 분석한 결과 Aspergillus속으로 동정된 A8-3이 glucoamylase 활성, 액화력, xylanase 활성이 가장 높았고, Rhizopus속으로 동정된 B23-3은 당화력이 가장 우수하였다. 우수효모를 선발하기 위하여 pH, 무게 감량, 내당성, 내알코올성 등을 측정한 결과, Saccharomyces속인 A10-4가 가장 우수하였다. 같은 원료비율로 만든 누룩에 우수균주를 접종하였을 때, 단일 균주를 처리할 때보다 A8-3과 B23-3인 두 균주를 혼합하여 처리한 경우가 당화력이 높게 나타났다. 누룩을 원반형의 누룩과 팰릿(개량형) 형태로 만들어 혼합종균 배양액을 접종한 후 당화력을 측정한 결과, 비슷한 당화력을 나타내었다. 개량형 누룩을 사용하여 양조하는 경우, 좁쌀주 양조에 발효효율을 높일 수 있을 것으로 판단되었다. 수집된 누룩은 수분이 10~13%, 총당은 55~70%, 조단백질은 10~18% 조지방은 0.2~l.0%, 회분은 1.8~2.1%이었다. 본 연구에서 제조한 누룩은 수분이 12~15%, 총당은 61~7l%, 조단백질은 15~20%, 조지방은 0.4~1.5%, 회분은 1.1~1.5%이었다.

  • PDF

Functional Properties of Sunmul (Soybean Curd Whey) Concentrate by Ultrafiltration (한외여과에 의한 순물 농축액의 기능적 특성)

  • Kim, You-Pung;Eom, Sang-Mi;Chang, Eun-Jung;Kim, Woo-Jung;Oh, Hoon-Il
    • Korean Journal of Food Science and Technology
    • /
    • v.38 no.4
    • /
    • pp.488-494
    • /
    • 2006
  • This study was carried out in order to investigate the feasibility of utilizing concentrated sunmul (soybean curd whey), which is a waste by-product of soybean curd processing, as a functional food ingredient. Sunmul Powder was concentrated by ultrafiltration and spray dried with or without dextrin. Oil adsorption capacity of UF retentate powder was similar to that of ISP (Isolated Soy Protein) and higher than that of sunmul powder, whereas water holding capacity of UF retentate powder was lower than that of ISP. Protein solubility of all types of UF retentate powder was significantly higher than that of ISP at pH 2.0-10.0 with the lowest protein solubility seen at pH 4.0 and solubility increasing as the conditions became more acidic or alkaline. Emulsifying activity indexes of UF retentate powder at pH 2.0-10.0 were not influenced by pH. Emulsion stability of 4% sunmul solution was lowest at pH 4.0, but that of UF retentate powder was higher at acidic pH values and decreased with increasing pH. Foaming capacities of sunmul and UF retentate powder were high at pH 4.0-6.0, but the foam of UF retentate powder disappeared within 20 minutes in all conditions of pH.