• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2009.10a
• /
• pp.196-197
• /
• 2009

지하에 전류를 흘려보내 분극현상을 유도하고, 이 유도분극 현상을 측정하는IP탐사는 금속 광물 탐사에서 널리 이용되고 있다. 특히 광대역주파수를 이용하는SIP탐사는 IP탐사에서 측정하는 전기비저항과 더불어 위상정보까지 제공해 줄 수 있어 금속광물의 종류를 구분하는 등 보다 효과적인 탐사 방법으로 제시되고 있다. 이 연구는 최근 원자재가 급등에 따른 국내 외 광산개발에 필요한 자원탐사 기술 개발의 일환으로 광석 중에 포함되어 있는 금속광물의 SIP 효과에 대한 기초적 연구를 수행한 것이다. 암석의 SIP를 측정 시스템은 GDP-32 system과 Lab transmitter(Zonge)를 사용하여 구성하였으며, 주파수에 따른 IP 효과를 측정하기 위하여 KCl 0.01 mol 용액으로 포화시킨 Glass beads에 황철석 분말의 중량비를 증가 시키면서 SIP를 측정하였다. 실험에 사용된 Glass beads의 직경은 $0.75{\sim}1.0\;mm$의 범위이고, 황철석은 원광석을 분쇄하여 $20{\sim}25$ mesh를 통과한 분말을 사용하였다. 실험방법은 아크릴 수지로 만든 육면체 시료홀더를 사용하여 처음에는 KCl 0.01 mol 용액으로 포화시킨 Glass beads의 SIP를 측정하고, 그 다음에 Glass beads 내에 황철석 분말을 중량비로 $1{\sim}10%$까지 증가 시키면서 SIP를 측정하였다. 이 때 사용한 주파수 대역은 $0.016{\sim}1024\;Hz$ 이며, 측정결과로부터 전기비저항과 Phase를 산출하여 도시하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.68-74
• /
• 1995

In this paper, E-polarized electromagnetic scattering by a conducting strip grating with 2 dielectric layers is analyzed to calculate the geometrical reflected and transmitted power by applying the Fourier-Galerkin moment mothed. The induced current density is expanded in a Fourier series using a simple exponential func- tion, and we applied the boundary conditions to the electromagnetic fields at the boundary planes. The sca- ttered electromagnetic fields are expanded in a series of Floquet mode functions. To examine the accuracy of the present method, the geometrically reflected and transmitted power are evaluated and compared with those of the existing papers, and then the numerical results are found in good agreement with those of the existing paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7283-7286
• /
• 2014

SiOC films were prepared as insulators for displays by sputtering at low temperatures, and the relationship with the electrical properties waaas examined. The electrical properties of SiOC films were affected by the annealing process, and SiOC films annealed at 100oC showed a significant increase in thickness and a decrease in the reflective index. XRD revealed an increase in the degree of the amorphous structure. Moreover, the capacitance and leakage current of the SiOC films annealed at 100oC decreased. These characteristics of SiOC films highlight their potential as ideal insulators. Amorphous SiOC films by the reduction of polarization are dependent on the elongation effect of the bonding lengths in the structure and the thickness. The properties of these SiOC films are suitable for low temperature displays.

• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.409-417
• /
• 2009

In this study, autogenous crack healing and artificial crack healing using electrochemical electro deposition method were conducted to compare in the aspects of corrosion monitoring. Furthermore, the analysis of impressed voltage characteristics, galvanic current and linear polarization resistance comparison, and photo image processing technique were performed for quantitative comparisons of healing ratio. As a result, it was found that, in view of impressed voltage of artificial crack healing, the measured voltage was increased as time goes by. From the galvanic test results of artificial crack healing, the current vs. potential distribution value were formed widely in comparison with autogenous crack healing. In this point, it was shown that artificial crack healing has more eleatic resistance capacity than autogenous crack healing technique. Finally, it was found that artificial crack healing was 1.63 times higher than autogenous healing in view of crack healing ratio.

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.378-384
• /
• 1973

To investigate the mechanism of the reaction of electrolytic oxidation of iodide to iodate ions, polarization curves are determined in various kinds of solution using electrodeposited lead peroxide and platinum anodes. It was observed from the polarization curves that the limiting current is exists at concentration 1.5 M of potassium iodide, and these limiting current disappeared as potassium hydroxide was added up to concentration of 0.1 M. while in case of platinum anode, limiting current did not appear in dilute potassium iodide solution. These results are owing to the chemical reaction, $PbO_2+2I^{-}+2H^+{\to}PbO+I_2+H_{2}O$ ocurring at the surface of lead peroxide anode. Also, we studied to obtain the optimum conditions of electrolytic preparation of iodate from iodide solution using a cell without the diaphragm. The results are that; (a) addition of potassium dichromate at the anti-reducing agent is proper in concentration of 0.1 g/l, (b) electrolytic temperature is not so much effective in raising the current efficiency, (c) current efficiency is increased with current density, and (d) electrolysis is the most effective in weak alkaline solutions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.113-118
• /
• 2003

투어멀린(Tourmaline)은 비대칭 쌍극자를 가진 천연 유극성 결정체로 광물 중에서 영구전기분극을 띄고 있는 유일한 물질로써 일명 "전기석"이라고 알려져 있다. 분극에 의한 자체 미약전류(약 $60{\mu}A$)와 함께 음이온 및 원적외선의 발생으로 최근 우리주변에서 건강과 환경을 위한 관심고조의 대상인 육방정계의 압전성 및 초전성을 띄는 붕규산염(주요성분: Mg, Fe, B, Si, Ca)으로, 투어멀린 원석이나 그 복합세라믹체의 면역지수가 ~1000에서 ~400,000 이상인 점을 비롯하여 그 유용성을 이용하려는 새로운 아이디어 신상품들이 계속 개발되고 있다. 뿐만 아니라 물분자를 만나면 수소$(H^+)$와 수산기 $(OH^-)$로 전기분해 하여 친수기와 소수기 부분으로 구분하며, $H^+$와 $OH^-$는 각각 $H_2O$와 결합하여 활성이 강한 hydronium ion$(H_3O^+)$을 생성하고, 물 속에서 계속 불안정한 상태로 존재하는 수산기는 계면활성 작용이 있는 hydroxyl ion$(H_3O_2^-)$을 형성하여 물을 약 알카리성 (pH~7.4)으로 바꿔주며, 물분자 클러스터 세분화와 미네랄을 용출, 공급하여 이 물이 체내에 흡수되면 살균, 항균성의 면역기능을 갖게 되며, 혈액정화 기능과 자율신경 자극으로 교감신경의 흥분을 억제해 준다. 이와 함께 전기분극을 띈 투어멀린 입자는 다른 물질에 비하여 경이적 수치의 원적외선을 발생하여 강력한 열 효과와 높은 침투력으로 인체의 혈액순환 촉진과 혈전용해 작용을 주어 건강과 활력에 도움을 주는 것으로 확인되어 많은 관심을 끌고 있다. 따라서 유익한 이용가치를 인정받고 있는 천연 투어멀린을 단독 형태나 또는 서로 상승효과를 줄 수 있는 유용한 타 물질과 혼합물을 구성하여 성형 또는 EPD 방법으로 전착한 후 소결 처리하여, 소결체의 특성 분석과 함께 물에 대한 전기 화학적 작용 및 항균 효과를 조사, 확인하여 수질개선 효과를 분석하고 그 응용성을 개발, 확보하였다.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.307-312
• /
• 2017

In the industry, galvanizing using the principle of sacrificial anode is used Zn-Ni alloy plating was developed as one of the measures to increase the corrosion resistance rather than pure zinc plating. The alloy plating layer has a corrosion resistance of 4-5 times that of the pure zinc plating layer, so that it is applied to automotive parts requiring high corrosion resistance even though the plating cost is high. The amount of Zn-Ni alloy plating solution is a sulfuric acid bath, a chlorinated bath, an alkali bath, and an ammonia bath. Here, the influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. The results are explained by the cathode overvoltage and the diffusion coefficient. In general, as the overvoltage of the cathode increases, the concentration polarization becomes more important than the activation polarization. The concentration polarization is determined by element diffusion in the diffusion layer. That is, as the overvoltage of the cathode increases, the Zn content having a large diffusion coefficient increases.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.6
• /
• pp.411-419
• /
• 1999

It has been well recognized that a long term service at elevated temperature of $350^{\circ}C{\sim}550^{\circ}C$ induces embrittlement damage due to carbide precipitation and/or P, Sb and Sn segregation at grain boundaries and thereby deteriorates the grain boundary strength of heat resisting components in the energy-related plants. Therefore, it is very important to assess quantitatively the extent of embrittlement damage of heat resisting components to secure the reliable and efficient service condition and to prevent brittle failure in service. However, because fracture tests are limited in size and number of specimen obtained from the structural components, nondestructive test method is required. In this study, the optimum electrochemical parameters are investigated and discussed to evaluate nondestructive embrittlement damage for aged 2.25Cr-1Mo steels by means of electrochemical polarization test method (ECPTM) in proper corrosive environment. In addition, the electrochemical test results are compared with embrittlement degree evaluated by semi-nondestructive SP test.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.198-205
• /
• 2005

In this paper, the miniaturization of aperture-coupled RHCP patch antenna for the GPS system is treated. Circularly polarization characteristics is implemented by truncating diagonal corners of the square patch. Antenna size is reduced by inserting four uniform slits at the patch edges, which was equivalently lengthened the surface current by meandering it, This antenna uses aperture-coupled feeding structure with crossed-slot shape in order to give easy miniaturization of RHCP patch antenna. Simulated and measured results show that $42.7\%$ lower antenna size is obtained, and also $56\%$ lower -10dB bandwidth and $38.5\%$ lower 3dB AR bandwidth are obtained. when the proposed design scheme is applied to a commercial GPS antenna structure, $42.9\%$ lower patch size and $56\%$ lower 3dB AR bandwidth compared to commercial antenna at the same frequency are obtained.