• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.123-131
• /
• 2016

To capture color and near-infrared images simultaneously, a multi-spectral filter array(MSFA) sensor is used. This is because an NIR band gives additional invisible information to human eyes to see subject under extremely low light level. However, because lenses have different refractive indices for different wavelengths, lenses may fail to focus widely different rays to the same convergence point. This is why a chromatic aberration(CA) problem occurs and images are degraded. In this paper, the image restoration algorithm for an MSFA image, which removes the CA problem, is presented. The obtained MSFA image is filtered by the estimated low-pass kernel to generate a base image. This base image is used to remove CA problem in multi-spectral(MS) images. By modeling the image degradation process and by using the least squares approach of the difference between the high-frequencies of the base and MS images, the desired high-resolution MS images are reconstructed. The experimental results show that the proposed algorithm performs well in estimating the high-quality MS images and reducing the chromatic aberration problem.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.360-372
• /
• 1998

This study deals with the interaction between buoyancy-induced convection and externally imposed excitation in the form of harmonic rocking and the effect of the interaction upon heat transfer in low-Pr liquids. A wide array of system responses are discussed using the spectral collocation numerical technique. The superposition of buoyancy and Coriolis forces leads to complex fluid flow and heat transfer. The transition to chaotic convection is accelerated, and heat transfer rates are reduced as the enclosure is excited at the fundamental frequency of oscillation associated with the pure buoyancy-driven case. Average heat transfer rates are correlated for Pr=0.02 and 0.03. The heat transfer is affected more in the Pr=0.03 liquid than the case of Pr=0.02.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.729-737
• /
• 2017

The measurement accuracy of Tunable Diode Laser Absorption Spectroscopy based Tomography (TDLAST) for the temperature and concentration fields are dependant upon the arrangement method of the used laser beams. This paper reports on the optimization of laser beam arrangements using phantom data. It has been verified that the measurement error of the TDLAST decreased with increase of laser beam numbers. Further, it has been confirmed that perpendicular arrangements between the horizontal and the vertical laser beams without additional diagonal laser beams shows the minimum measurement errors.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.427-427
• /
• 2011

그래핀은 탄소원자가 육각형의 벌집형태로 배열되어 있는 원자단위 두께의 가장 얇은 재료중의 하나이다. 이는 우수한 기계적, 전기적, 광학적 특성을 지니고 있어 다양한 분야로의 응용이 가능할 것으로 예측되고 있다. 그래핀의 산업적 응용을 위해서는 대면적으로 두께 균일도가 높은 그래핀을 저렴한 방법으로 합성하는 것이 무엇보다도 우선적으로 요구된다. 그래핀을 얻는 방법으로는 물리 화학적 박리, 탄화규소의 흑연화, 열화학기상증착법(thermal chemical vapor deposition; TCVD) 등의 다양한 방법이 있으며, 현재로선 그 중 TCVD법이 대면적으로 두께균일도가 높은 그래핀을 합성할 수 있는 가장 적합한 방법으로 인식되고 있다. 그러나 이 방법은 탄소가 포함된 원료가스를 분해하기 위하여 고온의 공정이 요구되는 단점이 있다. 이러한 이유로 최근 그래핀은 저온에서 합성하기 위한 많은 연구들이 진행 중에 있으며 그 결과가 속속 보고 되고 있다. 본 연구에서는 고주파 플라즈마가 결합된 TCVD장치를 이용하여 원료가스를 효율적으로 분해함으로서 그래핀의 저온합성을 도모하였다. 기판은 300 nm 두께의 니켈박막이 증착된 산화막 실리콘 기판을 사용하였으며, 원료가스로는 메탄을 사용하였다. 실험결과, 350 W의 파워로 플라즈마를 방전하여 30분간 합성을 수행하였을 때 약 $450^{\circ}C$ 근처의 저온에서 수 겹의 그래핀이 합성 가능한 것을 확인하였다. 합성된 그래핀은 분석의 용이함 및 향후 다양한 응용을 위하여 산화막 실리콘 기판 및 투명 고분자 기판 등으로 전사하였다. 그래핀의 특성분석을 위해서는 광학현미경, 라만 분광기, 투과전자현미경, 자외 및 가시선 분광광도계, 4탐침측정기 등을 이용하였다.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.247-251
• /
• 1985

Dichloro cobalt(III) complex of a flexible tetradentate ligand of ethylenediamine-N,N'-di-S-${\alpha}$-propionic acid (eddp) has been prepared via the air-oxidation technique. Only ${\Delta}$-cis isomer has been yielded showing high stereoselectivity of the eddp ligand. Elemental analysis, ir, nmr and electronic absorption spectra have been used to characterize the complex and the absolute configuration of the complex is assigned by means of the nmr spectroscopy.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.191-196
• /
• 2017

One-phase method to prevent the initial formation of Ag(I) thiolate layered materal from the mixture of $AgNO_3$ and thiols was previously developed to generate TP (Thiolate-Protected)-nanosilver. In this modified method, $AgNO_3$ is added to the mixtures of $NaBH_4$ and thiols in ethanol. This method was so successful that it was applied to synthesize TP-nanogold and nanoplatinum. The synthesis and characterization of these nanoparticles by ultraviolet-visible (UV-vis) absorption spectra, transmission electron microscopy (TEM) pictures, X-ray powder differaction (XRD) patterns and infrared(IR) spectra are described. The results show that colloidal nanoparticles are spherical or oval shape and the mean sizes for TP-nanogold and nanoplatinum are about 3~7 nm and below 2 nm, respectively. The conformation of polymethylene [$-(CH_2)_7-$] sequence in octanethiolate attached to nanogold was elucidated as trans.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.387-387
• /
• 2011

탄소 나노튜브(Carbon nanotubes, CNTs)는 육각형 모양의 구조로서 오직 탄소만으로 이루어진 소재이다. CNT는 열전도율이 다이아몬드보다 약 2배 우수하고, 전기 전도는 구리에 비해 1,000배 높으며, 강도는 강철보다 100배나 뛰어나다. CNT의 이러한 특성을 이용한 트랜지스터, 태양전지, 가스 검출을 위한 고감도 센서, 나노 섬유, 고분자-탄소나노튜브 고기능 복합체 등 많은 분야에서 연구가 활발히 진행되고 있다. 또한 수직으로 성장된 탄소 나노튜브는 일반적인 재료에서는 보기 드물게 힘들게 직경이 나노 크기인 반면 길이는 수 mm까지 합성 되기 때문에 앞서 언급한 분야로의 활용이 더욱 유리하며, 그 중에서도 나노 섬유, 나노 복합체로서의 활용에 극히 유용하다. 이러한 이유로 수직 배열된 CNT 합성에 많은 연구가 집중 되고 있다. 여러 합성 방법 중 성장 변수를 비교적 용이하게 조절 가능한 열 화학 기상 증착법(Thermal chemical vapor deposition, TCVD)을 이용하여 수직 배열된 수 mm의 CNT를 합성한 연구 결과들이 보고된 바 있다. 그러나 앞선 연구결과들은 CNT의 성장속도가 느릴 뿐만 아니라 합성 시간이 길어질수록 성장 속도가 감소하는 경향을 보였다. 반면, 마이크로웨이브 플라즈마 화학 기상 증착법(Microwave plasma CVD, MPCVD)은 기존의 다른 TCVD에 비해 낮은 온도에서 CNT를 합성할 수 있는 장점을 가지며, 고출력(~600 W 이상)의 플라즈마를 사용하기 때문에 성장률이 높고 고밀도의 CNT 합성이 가능하다. 본 연구에서는 철을 촉매금속으로 사용하고 MPCVD을 이용하여 얇은 다중벽 CNT를 합성하였다. 철은 직류 마그네트론 스퍼터(D.C magnetron sputter)를 사용하여 증착하였다. 합성시 가스는 탄소 공급원인 메탄($CH_4$)과 함께 플라즈마 공급원인 수소($H_2$)를 사용하였다. 또한 산소($O_2$)의 주입 여부에 따른 CNT의 성장 속도와 성장 길이를 비교하였다. 산소를 주입하였을 때, CNT의 성장 속도와 길이 모두 크게 향상됨을 확인 할 수 있었다. 이는 촉매금속 표면의 비정질 탄소의 흡착으로 인해 활성화된 촉매금속의 반응시간을 증가시키기 때문이다. 성장된 CNT는 주사전자 현미경(Scanning Electron Microscopy, SEM)과 라만 분광법(Raman spectroscopy)을 통해 표면형상과 결정성을 분석하였다.

• Korean Journal of Crystallography
• /
• v.13 no.3_4
• /
• pp.165-171
• /
• 2002

Single phase $Pb(Fe_{1/2}Ta_{1/2})O_3$, ceramics were successfully synthesized from the powders prepared by solid state reaction (sintering temperature: $1100^{\circ}C$, density: $9.3g/cm^3$, average grain size: $5.1{\pm}1.2mm$, space group: Pm3m). Their dielectric properties measured at $-150{\sim}50^{\circ}C$ showed the maximum relative dielectric constant of 31000 at $-41^{\circ}C$. 1 kHz, and typical relaxor ferroelectrics characteristics such as diffuse phase transition and dielectric relaxation phenomena. However, the diffuseness of phase transition decreased and the dielectric properties became more normal ferroelectrics as the time of annealing at $1000^{\circ}C$ increased. By using Raman spectroscopy, it was revealed that the $Fe^{3+}$ and $Ta^{5+}$ ions in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, are stoichiometrically 1 : 1 ordered within the short-range that can not be probed even by transmission electron microscopy, and this stoichiometric 1 : 1 ordering is enhanced by the annealing. The relaxor ferroelectric characteristics in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, could be correlated with the stoichiometric 1 : 1 short-range ordering of B-site cations, and the decrease of relaxor ferroelectric characteristics in the annealed $Pb(Fe_{1/2}Ta_{1/2})O_3$ could be correlated with the enhanced stoichiometric 1 : 1 short-range ordering of B-site cations.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.20-28
• /
• 1998

Fluorimetric and absorption spectroscopic studies were performed to elucidate the photocurrent decay with time in the conversion process of solar energy into electrical energy using a photoelectrochemical cell containing rose bengal as a sensitizer, and allylthiourea as a supersensitizer. Spectra of dye solution before and after irradiation revealed a new photocatalytic dimerization reaction between sensitizer and supersensitizer. It was also found that the geometrical arrangement of the transition dipoles is oblique in the dimer of dye molecules.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.181-186
• /
• 1997

Time-of-flight impact-collision ion scattering spectroscopy (TOF-ICISS) was applied to study the geometrical structure of epitaxially grown MgO layers on a TiC(001). The hetero-epitaxial MgO layer was able to be deposited by thermal evaporation of magnesium onto the TiC(001) surface and subsequent exposure of oxygen at room temperature. A slight heating of the substrate at around $300^{\circ}C$ was necessary to overcome a thermal barrier for the ordering. The well-ordered MgO structure was confirmed with the 1$\times$1 LEED pattern. TOF-ICISS was useful in studying interface structure between oxide and substrate. The results revealed that the MgO layer is formed at the on-top sites of the TiC(001) substrate and the lateral lattice constant of MgO layer is the same as that of the TiC substrate. The MgO was deposited within two layers on the most parts of the surface.