• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.186-194
• /
• 1997

In this thesis, a new speed control algorithm based on the load torque observer theory is pro¬posed for the high performance speed control of a voltage source inverter to drive a 3 - phase induction motor. The proposed system becomes robust against disturbances using a feed -- for¬ward control of the load torque estimated at load torque observer. Computer simulation and experimental works using the proposed control confirm that transient response for the varia¬tion ofload torque becomes improved, compared with the conventional PI control method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.503-511
• /
• 1997

In 3 phase induction motor control system, the speed control using the load torque observer becomes robust against disturbances by means of a feed-forward control of the estimated load torque component. In case of variation of inertia moment, the estimated load torque has error because the observer uses the nominal inertia to estimate the load torque. And so, it is difficult to obtain good speed control characteristics. This paper has two study target strategy. First, we executes feed-forward control with the load torque observer when motor inertia has nominal value and compare it with conventional PI con¬trol. The second strategy estimates inertia moment error using the load torque observer when inertia moment change. The proposed two strategy is confirmed through the computer simulations and the experimental implementations by TMS320C31 microprocessor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 F
• /
• pp.2107-2109
• /
• 1997

Speed sensors are required for the vector control of induction motors. These sensors reduce the sturdiness of the system and make it expensive. Therefore, a drive system without speed sensors is required. Also, the rotor inertia constant, the damping constant and the disturbed load torque of the IM are estimated by the RLS estimator and a torque observer. Then the observed disturbance torque is fed forward to increase the robustness of the IM speed drive.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.58-66
• /
• 2009

본 논문은 전동기에서 기계적인 파라미터의 변화와 함께 외란의 변화에 대하여 외란상쇄 피드포워드 루프 제어를 적용한 유도전동기의 벡터제어를 고려하였다. 제안한 시스템에서 부하토크는 유도전동기의 토크를 최소차원 상태관측기를 근거로 하여 추정한다. 최소차원 상태관측기를 통해 추정된 부하토크에 의해 토크 전류를 얻어내고 토크 전류분을 피드포워드 보상해 줌으로서 외란에 의한 영향을 상쇄시켜 외란이 유입되거나 부하가 가변되는 등의 조건에서도 안정되게 동작하는 강인한 속도제어 시스템을 실현할 수 있다. 본 연구에서는 속도 센서가 없이 검출된 전압과 전류에 의해 속도를 추정하여 사용 하므로서 신뢰도를 높일 수 있도록 하였다. 제시한 제어기의 타당성을 입증하기 위하여 Matlab Simulink를 이용하여 시뮬레이션을 수행하여 타당성과 안정성을 검토하였고, 이를 실제 시스템을 구성하여 ADMC300를 이용하여 실험을 수행한 결과 기존의 시스템에 비하여 강인한 시스템으로 구동됨을 증명할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1024-1026
• /
• 2006

This paper designed a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional PI controller characteristic is affected by variations of load torque disturbance. In the proposed system, the speed control characteristic using a feedforward control isn't affected by a load torque disturbance. High speed calculation and processing for vector control is carried out by ADMC300 digital signal processor. Validity of the proposed control method is verified through simulation and experimental result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.559-563
• /
• 1991

Permanent magnet synchronous motor (PMSM) is receiving increased attention for servo drive applications in recent years because of its high torque to inertia ratio, superior power density and high efficiency. Vector-controlled PMSM has the same operating characteristics as separately excited dc motor. The drive system of servo motor is requested to have an accurate response for the speed reference and a quick recovery for the disturbance such as load torque. However the dynamics of PMSM drive change greately by parameter variations. Morever, when the unkown and inaccessible disturbances are imposed on PMSM, the drive system is given a significant effect by them. As a result, the drive system with both a fast drive performance and a reduced sensitivity to parameter variations is requested. In this paper, the robust control system of PMSM with torque feedforward using load torque observer is presented. In the proposed system, load torque is estimated by the reduced order observer, and the robust control system against load torque variation is realized using the torque feedforward. Moreover, the design of speed controller with the torque observer is discussed. Simulation results show that the proposed method is effective for suppression of parameter variations and load disturbance.