• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1971-1978
• /
• 1999

In this paper, we study the effects of long-range dependence (LRD) in VBR video traffic on queueing system. This paper consists of Part I and II. In Part I, we present a (LRD) video traffic model based on the shifting-level (SL) process. We observe that the ACF of an empirical video trace is accurately captured by the shifting-level process with compound correlation (SLCC): an exponential function in short range and a hyperbolic function in long range. We present an accurate parameter matching algorithm for video traffic. In the Part II, we offer the queueing analysis of SL/D/1/K called ‘quantization reduction method’. Comparing the queueing performances of the DAR(1) model and the SLCC with that of a real video trace, we identify the effects of SRD and LRD in VBR video traffic on queueing performance. Simulation results show that Markoivian models can estimate network performances fairly accurately under a moderate traffic load and buffer condition, whereas LRD may have a significant effect on queueing behavior under a heavy traffic load and large buffer condition.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.275-278
• /
• 2003

본 연구에서는 축산폐수공공처리장내에 설치된 Pilot-scale SBR(유효부피,20㎥)를 이용하여 sub-cycle의 폭기/무산소구간을 최적화하기 위하여 DO를 입력으로 하여 넓은 운전조건에서 적용될 수 있는 퍼지제어기를 개발하고, 또한 부하이상을 신속히 진단하여 유입부하량을 제어할 수 있는 퍼지 시스템 제어기를 개발하였다. DO값을 입력으로 한 퍼지제어기로서 안정성과 연속성에서 우수하였으나 시스템에 따라서 소속함수의 범위를 재조정해야 할 필요가 있다. DO미분값은 변화폭이 큰 지점을 검출함으로써 지연시간(lag time)의 DO값에 관계없이 적용할 수 있는 장점이 있다. 제어기의 적용성과 안정성을 높이기 위해서는 두 가지 제어인자를 동시에 고려할 필요가 있으며 퍼지 소속함수에 대한 입력으로서 DO값과 DO미분값을 적용하였다. 그 결과 폭기구간에서 매우 안정적이고 신속하게 폭기제어지점의 검출을 보여주고 있어 최적화된 제어가 가능함을 보여준다. 현장실험결과 지연시간에서의 DO가 높고 외란이 심한 경우에도 적용될 수 있음을 보여주었다.

• The Mathematical Education
• /
• v.57 no.2
• /
• pp.137-155
• /
• 2018

From the assumption that an individual's working memory capacity is limited, the cognitive load theory is concerned with providing adequate instructional design so as to avoid overloading the learner's working memory. Based on the cognitive load theory, this study aimed to provide implications for effective problem-based collaborative teaching and learning design by analyzing the level of middle school students' cognitive load which is perceived according to the problem types(short answer type, narrative type, project) in the process of collaborative problem solving in middle school function part. To do this, this study analyzed whether there is a relevant difference in the level of cognitive load for the problem type according to the math achievement level and gender in the process of cooperative problem solving. As a result, there was a relevant difference in the task burden and task difficulty perceived according to the types of problems in both first and second graders in middle schools students. and there was no significant difference in the cognitive effort. In addition, the efficacy of task performance differed between first and second graders. The significance of this study is as follows: in the process of collaborative problem solving learning, which is most frequently used in school classrooms, it examined students' cognitive load according to problem types in various aspects of grade, achievement level, and gender.

• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.575-579
• /
• 2007

Sludge disposal technology has been studied with many researchers since disposal of sewage sludge has been a social problem. The current technologies include incineration, carbonization, pyrolysis, landfilling and fertilization. However, all of these processes require a dry process, because sewage sludge with more than 80% high water content is difficult to be used as a raw material. This study has the purpose to establish the optimal operation conditions and the technology as changing the variables: kiln residence time, sludge load, dryer temperature, by using the previous study that is rotary kiln type dryer designed as a numerical simulation study. As the results, optimum conditions are determined as follows: kiln residence time, sludge load, dryer temperature are $62.5kg/m^3{\cdot}hr$, 26.2 min, $330^{\circ}C$, respectively. Content of water, drying efficiency, weight loss, volume loss show that the results are $10{\pm}2$, 88, 80, 60%, and the dried sludge is released by a dryer below 10 mm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.48-55
• /
• 1999

Ths paper presents an optimization method which determines locations and size of capacitors simultaneously while minimizing power losses and improving voltage profile in radial distribution systems. Especially, the cost function associated with capacitor pla.cerrent is considered as step function due to banks of standard discrete capacities. Genetic algorithms(GA) are used to obtain efficiently the solution of the cost function associated with capacitors which is non-continuous and non-differentiable function. The strings in GA consist of the node nwnber index and size of capacitors to be installed. The length mutation operator, which is able to change the length of strings in each generation, is used. The proposed Jrethod which determines locations and size of capacitors simultaneously can reduce power losses and improve voltage proftle with capacitors of minimum size. Its efficiency is proved through the arolication in radial distribution systems.ystems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.271-279
• /
• 2016

The objective of this study was to determine the effect of the moisture content and pellet mill type on the physical and chemical characteristics of Italian ryegrass (IRG) pellet. Moisture content of raw material significantly (p<0.05) affected IRG pellet formation. Moisture content at 25% was the best condition for IRG pellet formation in terms of shape, power load and temperature changes. The hardness of pellet was decreased when moisture content was increase. However, the hardness of pellet was not affected by pellet mill type. Moisture content at 30% dramatically (p<0.05) decreased the durability compared to moisture content at 25%. Dry matter content of IRG pellet was increased (p<0.05) after pelleting. Total count of microorganism was decreased in pellet due to pressure heat and moisture losses during the pelleting process. These results indicated that the proper moisture content of Italian ryegrass pelleting would be at 25%. In addition, Roll & flat die type would be more suitable than Ring die and Die & flat die type in IRG pelleting. Pelleting works would be beneficial for improving forage quality and long storage.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.12
• /
• pp.714-722
• /
• 2017

The TPLMs is a system to manage the total amount of pollutants discharged from the watershed in order to achieve the target water quality of the river. In this process, the pollutant load can be classified into generation, discharge and delivery load. When using equation 2, the discharge coefficient should be 1. In case of using equation 3, it is considered that the discharge coefficient defined in the Technical Guideline should be applied. The delivery load is calculated as the product of the discharge load and the delivery ratio, and the delivery ratio is defined as the rate at which the pollutant discharged from the watershed reaches a specific point in the stream. In this study, the delivery ratio estimation method proposed by Hwang (2016) was applied to the Yonggang watershed in the Nakdong river. And the input data of QUALKO2 model was generated by using the estimated delivery ratio (equation 3) and the validation study was conducted by comparing with DRave (equation 2). As a result of the study, it is possible to use both the equation 2 and the equation 3, but it is necessary to change the methodology according to the application of the discharge coefficient.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.52-58
• /
• 2007

This paper presents the wind-power model for generation adequacy assessment. Both wind-power and system load depend on time of a year and show their periodic nature with similar periods. Therefore, the two quantities have some probabilistic relations, and if one of them is given, the other can be decided with some probability. In this paper, the two quantities are quantized by k-means clustering algorithm and related probabilities among the cluster centers are calculated using sequential wind-power and system load data. The proposed model is highly expected to be applied for generation adequacy assessment by Monte-Carlo simulation with state sampling method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.88-98
• /
• 2000

In this paper, a robust controller using $H_{\infty}$ control theory has been designed for the load frequency control of interconnected 2-area power system. The main advantage of the proposed $H_{\infty}$ controller is that uncertainties of power system can be included at the stage of controller design. Representation of uncertainties is modeled by multiplicative uncertainly. In the mixed sensitivity problems, disturbance attenuation and uncertainty of the system is treated simultaneously. The robust stability and the performance of model uncertainties are represented by frequency weighted transfer function. The design of load frequency controller for each area was based on state-space approach. The comparative computer simulation results for the proposed controller and the conventional techniques such as the optimal control and the PID one were analyzed at the additions of various disturbances. Their deviation magnitude of frequency and tie line power flow at each area were mainly evaluated. Also the testing results of robustness for the cases that the perturbations of the all parameters of power system were amounted to about 20% were introduced. It was approved that the resultant performances of the proposed $H_{\infty}$ controller with mixed sensitivity were more robust and stable than the one of conventional controllers.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.5
• /
• pp.405-413
• /
• 2015

This paper presents the motion accuracy simulation considering loads such as workpiece weight, cutting force, cogging force of a linear motor, and force caused by misalignment and runout error of a ballscrew in linear motion units. The transfer function method is basically utilized to estimate 5-DOF motion errors, together with the equilibrium equations of force and moment on the table. The transfer function method is modified in order to consider clearance changed according to the loads in the double sided hydrostatic/aerostatic bearings. Then, the analytic model for predicting the 5-DOF motion errors is proposed with the modified transfer function method. Motion errors were simulated under different loading conditions in the linear motion units using hydrostatic, aerostatic, and linear motion bearings, respectively. And the proposed analytic model was verified by comparing the estimated and measured motion errors.