• Korean Journal of Ichthyology
• /
• v.28 no.4
• /
• pp.215-222
• /
• 2016

Triploidy was induced in the marine medaka, Oryzias dancena by cold shock treatment ($0^{\circ}C$) of fertilized eggs for 30, 45, or 60 min, applied two minutes after fertilization. The triploid genotype was induced by each of the thermal shock regimes tested. The best result was obtained when the eggs were treated for 45 min, which induced triploidy in all the resulting fish. Triploidy was confirmed using chromosomal and flow cytometer analyses, and erythrocyte measurements. The surface areas and volumes of the erythrocytes of triploid fish were significantly larger than those of diploid fish, and their chromosome number (3N=72) was 1.5 times greater that for the diploids (2N=48). Based on a flow cytometer analysis, the triploid fish had approximately 1.5 times the cellular DNA content (2.40 pg/cell) of the diploid specimens (1.61 pg/cell). Data from this study provide the basis for the development of unique models for studying reproductive confinement in transgenic fish.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.305-311
• /
• 2012

In order to recycle the coal bottom ashes (denoted as BA) produced from a thermal power plant, the artificial aggregates (denoted as AAs) containing BA and red clay were manufactured, and the physical properties of AAs were studied as a function of particle size of BA and batch compositions. As-received BA had 38 wt% coarse particles of above 2 mm and many unburned carbon mass and porous slag particles were co-existed. So the two particle sizes of BA, the fine (< 100 ${\mu}m$) and coarse (< 2 mm), were prepared by milling and screening process. The AAs containing fine BA sintered at $1100{\sim}1200^{\circ}C$ had the higher bulk density and lower water absorption compared to the specimen made of coarse BA. The inside core of AAs manufactured by using coarse BA showed nonuniform and porous microstructure, while the AAs made of fine BA had a uniform and dense microstructure. In this research, the AAs containing BA and red clay with various bulk density (1.2~1.7) and water absorption (13~21 %) could be manufactured by controlling the particle size of BA and batch compositions, so the AAs of various physical properties could be applied to the wide fields such as construction/building materials in near future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.4
• /
• pp.292-303
• /
• 2011

A new type of sand bypassing system is proposed for recovering the eroded beach in this study. This system provides an added methodology to the soft defence which is main recovery method for the coastal shore protection in the world. The study proposes a conceptional design and manufacturing procedure for the relatively small size machine of sand bypassing. In order to get the discharging volume information, the power capacity of the system is tested in the field. The discharge rate of the new system shows up to the expected maximum of 618 ton/hr which is 9.6% lower than that by theoretical calculation. It gives a resonable agreement in this system when the flow is assumed to be of the high density. In this study, the delivering volume of sand is estimated according to the discharge rate. The combination of 300 mm(12 inch) intake and 250 mm(10 inch) discharge pipe line has the pumping capacity of $103\;m^3/hr$ which is nearly the same as that of South Lake Worth Inlet sand bypassing system, Florida, U.S.A.. The proposed system added the mobility to its merit. The unit price of Florida's sand bypassing is $$8~9/m^3$ (US). The system would be economically suitable for small volume of sand because no additional equipment is necessary for the intake. The diesel fuel of 25~30 l/hr was consumed during the system operation. The multiple working system would be the next investigation target for large volume of sand.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.27-44
• /
• 2012

The offshore wind farm is increasingly attractive as one of future energy sources all over the world. In addition, the capacity of an offshore wind turbine gets larger and its physical characteristics are big and heavy. In this regard, a special port is necessary to assemble, store, and transport the offshore wind systems, supporting to form the offshore wind farms. Thus, this study aims to provide a policy maker which evaluation factors can significantly affect to the optimal site selection of a offshore wind port. For this, Fuzzy-AHP method is applied to capture the relative weights. The results of this study can be summarized as follows. Five criteria in level I was defined such as the accumulation factor, the regional factor, the economic factor, the location factor, and the consortium factor. Of these, the accumulation factor(37.4%), the location factor(34.2%), and the economic factor( 24.5%) were analyzed by major factors. In level II, three assessment items of each factor were selected so that total fifteen items were formed. To sum up, the site selection of offshore wind port should consider the density of the wind industry, cargo volume of securing the economic operation of terminals, the development degree of offshore wind related industry, and the proximity to the offshore wind farms. In other words, the construction of offshore wind port should be paid attention to considering not only the proximity to offshore wind farms but also the preference of turbine manufacturing companies.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.687-693
• /
• 2014

Poly(ether-block-amide) 1657 (PEBAX 1657) blended membranes with molecular weight 400 poly(ethylene glycol) (PEG 400) were prepared and their permeability was tested for the gases $N_2$, $O_2$, $CH_4$, $CO_2$, and $SO_2$ by the time-lag method. The permeation characteristics were investigated in terms of diffusivity and solubility, which are dominant factors for gas transport. With the addition of PEG 400, the permeability of all the gases increased and also the ideal selectivity for several pair gases was enhanced. In particular, selectivity for $CO_2/N_2$ ranged from 53.2 (pristine PEBAX 1657 membrane) to 84.1 (50% PEG 400 added), for $SO_2/CO_2$ from 38.9 to 50.7, and for $CO_2/CH_4$ from 17.7 to 31.4. The increase of both permeability and selectivity is mainly because of the increase of solubility of the gases, especially $CO_2$ and $SO_2$. To obtain durability against water vapor, glutaraldehyde (GA) was added to the PEBAX 1657/PEG 400 blended membranes. As a result, permeability decreased owing to a reduction of the free volume and ether oxide units, which are the main factors in elevating the permeability for the blended membranes, and selectivity decrease however; we believe that the durability of the resulting membranes would be increased.

• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.83-93
• /
• 2014

This research was carried out for suggesting design criteria and procedure for maximizing flood control capacity by building flood control facilities like flood retention basin built in connection with existing facilities in order to cope with increased uncertainty due to factors such as urbanization and climate change. We suggested the procedure for the analysis under the various scenarios applicable for the cases of determining retention basin capacity as provision for the flood water level increase in main river channel or estimating flood water level reduction effect when retention basin capacity is given. Procedure for estimating design flood hydrograph at any duration using Intensity-Duration-Quantity (IDQ) originated from the existing IDF, and its application example were provided. Based on rainfall estimated by the IDQ analysis, it is possible to calculate an equivalent peak hydrographs under various scenarios, e.g. lower frequency hydrograph under same rainfall duration with water level higher than existing hydrograph, hydrograph with same peak and higher volume due to increased rainfall duration, hydrograph with higher peak and volume than existing hydrograph, etc.

• Food Science and Preservation
• /
• v.17 no.6
• /
• pp.814-819
• /
• 2010

We investigated quality changes in dumpling shells prepared using various concentrations of Enteromorpha intestinalis powder(EIP). Dumpling shells were prepared by addition of 0%, 3%, 5%, 7%, and 9%(all w/w) EIP to the flour used in the basic formulation. The gelatinization temperature of the EIP-wheat flour composite increased whereas initial viscosity at $95^{\circ}C$, viscosity at $95^{\circ}C$ after 15 min, and maximum viscosity, all fell with increasing EIP content, as measured by amylography. In addition, the Hunter's color L, a, and b values decreased significantly with increasing amounts of EIP. All of cooked weight, cooked volume, and water absorption of dumpling shells prepared with EIP were significantly greater than control values. In terms of textural characteristics, addition of EIP increased hardness, springiness, and chewiness, but decreased adhesiveness and cohesiveness. Sensory evaluation showed that dumpling shells prepared with 5% (w/w) EIP were preferred.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.736-740
• /
• 2005

As an alternative of yeast, various concentrations to prepare hypo-allergenic bread (HAB). Addition of sodium bicarbonate increased $CO_2$ emission, but at higher than 2.0% caused bitter taste compared to other mixtures. Addition of sucrose significantly increased $CO_2$ emission. HABs 7 ($NaHCO_3$ 2.0g+sucrose 0.63 g) and 8 ($NaHCO_3$ 2.0g+sucrose 1.0g) showed higher grain and color scores. HAB 5 ($NaHCO_3$ 1.5g+sucrose 1.0g) and 6 ($NaHCO_3$ 1.5g+sucrose 2.0g) gave higher aroma and taste scores. HAB 5 showed significantly higher overall acceptability (p<0.05) score than others, whereas HABs 7 and 8, regardless of high external sensory qualities, showed lower overall acceptabilities than HAB 5 due to bitter taste. Prototypical HAB was obtained using wheat flour (100g) and water (62mL) incubated at $37^{\circ}C$ for 4 hr for treatment of b.p pretense (100mg) before adding sodium bicarbonate (1.5%), sucrose (1.0%), NaCl (1.0%), and citric acid (1.0%).

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.598-603
• /
• 2003

This study was accomplished to investigate the effect of dietary fiber purified from Cassia Tora on the quality characteristics of the bread compared to hydroxypropyl methyl cellulose (HPMC) and xanthan gum (XG). The bread-making flour was prepared with wheat flour/rice flour (75/25) and added with 3% various dietary fibers. Dietary fiber of Cassia Tora (CT fiber) showed the highest volume expansion and the volume of bread with XG was the lowest. The values of lightness in both the crust and crumb color were the highest in the bread with XG. There was no significant difference in the score of sensory evaluation about color. As a result of texture measuring by Texture Analyzer, springiness and cohesiveness were not affected by the addition of CT fiber. However the significant decrease of gumminess, hardness and chewiness were observed from the bread containing CT fiber. Overall acceptance scores by sensory evaluation of baked bread with CT fiber were not significantly different from those of control.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.722-727
• /
• 2012

In order to improve the physical properties of brown rice by hydration and cooking, the amount of water absorption, hardness, reducing sugar, and minerals were measured for rice (NR), brown rice (NBR), and scratched brown rice (SBR). The amounts of water absorption were present in the order of NBR<0.07 SBR<0.20 SBR=NR after 210 min. The moisture contents of gelatinization rice were significantly different by degree of milling and scratch. The hardness of gelatinization rice were present in the order of NR<0.20 SBR<0.07 SBR