• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.443-450
• /
• 2019

We studied to find the optimal manufacturing conditions of coffee grounds sludge RDF with oil drying method. We expanded the lab scale to pilot scale to compare the efficiency of the oil-drying equipment and The selection of the ratio of coffee grounds and oil, the setting temperature, and the temperature change and water content with time were measured. In order to analyze the characteristics of the research results, characteristics of solid fuels produced(Coffee grounds of oil-dried) by calorimeter, TGA, combustion equipment, and combustion gas measuring instrument were analyzed. As a result, the ratio of oil to coffee grounds was 4: 1, and when the setting temperature was set to $300^{\circ}C$, the water content reached 10wt.% or less within 20 minutes. ln addition, it showed high calorific value of 6,273kcal/kg. However, coffee grounds had a similar composition to wood and showed high luminance and produced a lot of CO in combustion gas. As a result, it is considered to be unsuitable for thermoelectric power plant and camping fuel, but the initial ignition speed is high and the heat generation is high, so it is considered that it can replace the fuels for current use.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.3-13
• /
• 2019

Recently, quality problems of steel used for construction have been raised as a cause of building collapse and safety accidents. Accordingly, it becomes more important to secure quality through material management, procurement management, and construction management for construction used steels. However, the quality management for construction used steels is confined to technical production and process control. So, it does not provide a solution of various non-conforming steel products issues. Therefore, this study suggests improvements of the construction system to secure quality of the construction used steels. Through expert interviews, we identify the items for system improvement and derive the top priority items by considering utility through a structured Analytic Hierarchy Process (AHP). It also divided the respondents into enterprise and research groups to analyze differences, implications and future improvement issues and suggest a road map. It is expected that the priority items derived in this study could be useful as a basic data for making policy decisions to assure the quality of construction used steel.

• 재활복지
• /
• v.21 no.2
• /
• pp.169-190
• /
• 2017

The purpose of this study was to investigate item goodness-of-fit of Scale, Rasch rating scale model was applied to 5 dimensions 24 items of the Test of Performance Strategies (TOPS) in a sample of athletes with physical disabilities (n=215). An assumption to test Rasch Model, which is satisfaction of unidimensionality, is regarded through PCAR test, and WINSTEPS 3.65 program is used to test the goodness-of-fit of items. The results of this study were: First, 3-point rating category was appropriate for the TOPS instead of the existing 5-point rating category. Second, as a result of analyzing the goodness-of-fit of the items, 21 items of the TOPS were suitable, but 3 items were not. Third, the item reliability of person separation of the TOPS was acceptable, but the person reliability of item separation was not suitable and it was necessary to adjust the item order considering the difficulty level of the items. Fourth, as a result of comparing the individual attribute score and the difficulty level through the Item-Person Map, the distribution of the item difficulty distribution was shown to be biased in some factors compared to the personal attribute score distribution.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2019

This study is to measure the length of the Demilitarized Zone and the Military Demarcation Line(MDL) on the Korean Peninsular. For this purpose, maps of the Armistice Agreement Volume II were used. These maps are nine sheets. In order to extract the MDL shown on the map, coordinates were assigned to the scanned image maps using the georeferencing module of ArcGIS based on the sheet line coordinates. The accuracy of the extracted vectors was checked by overlaying them on the maps of the Armistice Agreement Volume II. And I tried to validate these vectors through comparative analysis with vectors extracted from Kim(2007). Vectors extracted from Kim(2007) had errors in the curvilinear parts of the MDL, but the vectors extracted from this study exactly matched the MDL in the Armistice Agreement Volume II. The measured length is 239.42km(148.77miles). This means that the expression '155mile MDL' or '248km DMZ' in papers, reports or mass media has so far been inappropriate. I think this study will be able to provide information on the exact length of the DMZ in studies related with DMZ or in policy decisions by the national and local government. However, it is deemed necessary to verify this result by national organizations such as the NGII(National Geographic Information Institute). After these verification procedures, I hope that the national government will inform the people of the exact length of DMZ and MDL.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.295-302
• /
• 2018

Face recognition (FR) has been widely used in various applications, such as smart surveillance systems, immigration control in airports, user authentication in smart devices, and so on. FR in well-controlled conditions has been extensively studied and is relatively mature. However, in unconstrained conditions, FR performance could degrade due to undesired characteristics of the input face image (such as irregular facial pose variations). To overcome this problem, this paper proposes a new method for determining if an input image is suitable for FR. In the proposed method, for an input face image, reconstruction error is computed by using a predefined set of reference face images. Then, suitability can be determined by comparing the reconstruction error with a threshold value. In order to reduce the effect of illumination changes on the determination of suitability, a preprocessing algorithm is applied to the input and reference face images before the reconstruction. Experimental results show that the proposed method is able to accurately discriminate non-frontal and/or incorrectly aligned face images from correctly aligned frontal face images. In addition, only 3 ms is required to process a face image of $64{\times}64$ pixels, which further demonstrates the efficiency of the proposed method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.17-24
• /
• 2019

Carbon Fiber Reinforced Polymers(CFRP) has widely utilized as a material for rehabilitation because of its light-weight, deformability and workability. Because CFRP is brittle material whereas steel is ductile, it is inappropriate to apply conventional design approach for steel reinforcement. For ductile material, the behavior of combined elements is on average of that of unit element due to the stress redistribution between elements after yielding. Therefore, the mean value of the stress of combined elements is equal to that of unit element and the standard variation is smaller. Therefore, although the design value can increase, it is used as constant value because it is conservative and practical approach. However, for brittle material, the behavior of combined elements is governed by the weaker element because no stress redistribution is expected. Therefore, both the mean value and standard variation of the stress of combined elements decreases. For this reason, the design value would decrease as the number of element increases although it is eventually converged. In this paper, in brittle material, it is verified that the combination of unit element with normal distribution results in combined element with weibull distribution, so the modifying equation of mechanical properties is proposed with respect to the area load applied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.220-228
• /
• 2019

To determine the horizontal and temporal distribution of common squid larvae, Todarodes pacificus (hereafter T. pacificus), we conducted surveys using an IKMT net (mesh size: $500{\mu}m$) with a Fisheries Research Vessel (FRV, TAMGU 21) in the southwestern part of the East Sea in summer (August and September) and autumn (November) 2015. A total of 228 larvae, ranging in mantle length (ML) from 1.4 mm to 21.9 mm, were collected at 35 stations over the research period. The monthly average mantle length of T. pacificus larvae did not differ significantly in August, September and November. (p > 0.05). Catch densities at positive stations ranged between 0.1 and $7.9inds./1,000m^3$ over the research period. Incidence rates of T. pacificus larvae were similar over three months, in the study area (62.9 % - 68.6 %). The 4 - 5 mm mantle length range had the highest frequency in size-frequency distributions for T. pacificus larvae. The larval survival temperature ($15-24^{\circ}C$) at positive stations for catch densities was located below a 20 m depth in August whereas it was located at the surface of the water in September and November. The survival temperature for larvae existed from the bottom to the surface of the water where larvae were sampled larvae in shallow sea areas. However, the larval survival temperature occurred in a shallower location than the upper layer of the thermocline in deep sea areas at a depth below 100 m.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.234-253
• /
• 2018

Within the Gyeongju Basin lies the central an ancient tombs (Wolseongbuk tombs), which are seen to be the core tombs of the Silla ruling class. An accurate understanding of the location of the ancient tombs, commonly known as a flatland area, provides a clue to understanding the contrast process and direction of the ancient tombs. This in turn requires an accurate understanding of the surrounding landscape, including where the ancient tombs are located. In other words, it must be possible to restore as much of the highland area as possible within the basin in which the ancient tombs are located. All data were analyzed as deeply as possible in order to identify the topographical features of the ancient tombs. As a result, it appears that the ancient tombs are located at the end of a fan or at the end of the line, and a large number of springs and wetlands are distributed around the area. This area is relatively low and unsuitable for generating high levels of moisture on the ground. These topographical features are directly related with the distribution of polymers, and solids were completely formed to avoid wetlands. Meanwhile, the ancient tombs are divided into several zones by springs and wetlands, and each area also has the characteristics of large groups where the boundaries are protruding and isolated. Also, this aspect was found to be true for the Oreung around Namcheon. After all, the location and distribution of Silla in the Daerungwon area are the result of the reflection of the fine geographical features of the Gyeongju basin, which are the key factors of springwater and wetlands.

• Clean Technology
• /
• v.27 no.3
• /
• pp.269-274
• /
• 2021

Bioenergy is generally considered to be one of the options for pursuing carbon neutrality. However, for a period of time, combustion of harvested plant biomass inevitably causes more carbon dioxide in the atmosphere than combustion of fossil fuels. This paper proposes a method that predicts and minimizes the total amount and payback period of this carbon debt. As a case study, a carbon cycle impact assessment was performed for immediate switching of the currently used fossil fuels to biomass. This work points out a fundamental vulnerability in the concept of carbon neutrality. As an action plan for the sustainability of bioenergy, formulas for afforestation proportional to the decrease in the forest area and surplus harvest proportional to the increase in the forest mass are proposed. The results of optimization indicate that the carbon debt payback period is about 70 years, and the carbon dioxide in the atmosphere increases by more than 50% at a maximum and 3% at a steady state. These are theoretically predicted best results, which are expected to be worse in reality. Therefore, biomass is not truly carbon neutral, and it is inappropriate as an energy source alternative to fossil fuels. The method proposed in this work is expected to be able to contribute to the approach to carbon neutrality by minimizing present and future carbon debt of the bioenergy that is already in use.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.444-456
• /
• 2021

Economic abundance and the development of medical technology led to an aging society with an average life expectancy of 100 years, but retiring from the labor market at the age of 65 has become more difficult. This study aims to identify the influence of entrepreneurship, social support, and entrepreneurship mentoring as an effective support method to increase the entrepreneurial intention in order to enhance the entrepreneurial intention as an adult's second career development. In this study, data were collected using questionnaires from 340 adults, but only 319 were selected because 21 were judged to be inappropriate. For statistical analysis, SPSS 18.0 was used, and reliability test, factor analysis, and multiple regression analysis were used for hypothesis testing. The research results are as follows. First, as a result of examining the effects of adult entrepreneurship factors on entrepreneurship, it was found that among entrepreneurship, innovation and initiative had a significant positive (+) effect on entrepreneurship. Second, as a result of examining the effect of social support on entrepreneurial intention, it was found that family support had a significant negative (-) effect on entrepreneurial intention. Third, as a result of examining the effect of entrepreneurship mentoring on entrepreneurial intentions, it was found that role models and mentors had a positive (+) effect on entrepreneurial intentions. Fourth, as for the mediating effect of entrepreneurial efficacy, there were significant mediating effects of innovativeness → entrepreneurial efficacy → entrepreneurial intention, role model → entrepreneurial efficacy → entrepreneurial intention, mentor → entrepreneurial efficacy → entrepreneurial intention.