• Journal of Auto-vehicle Safety Association
• /
• v.13 no.1
• /
• pp.45-50
• /
• 2021

This study aimed to verify the criteria of the driver monitoring systems proposed by UNECE ACSF informal working group and the ministry of land, infrastructure, and transport of South Korea using driving behavior data. In order to verify the criteria, we investigated the safety regulations of driver monitoring systems in a conditional autonomous vehicle and found that the driver monitoring measures were related to eye blinks times, head movements, and eye closed duration. Thus, we took two different experimental data including real-world driving and simulator-based drowsy driving behaviors in previous studies. The real-world driving data were used for analyzing blink times and head movement intervals, and the drowsiness data were used for eye closed duration. In the drowsy driving study, 10 drivers drove approximately 37 km of a monotonous highway (about 22 min) twice. The results suggested that the appropriate duration of eyes continuously closed was 4 seconds. The results from real-world driving data were presented in the other paper - part 1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.639-645
• /
• 2018

This paper is intended to develop a decision model that can be applied to autonomous vehicles and autonomous mobile vehicles. The developed module has an independent configuration for application in various driving environments and is based on a platform for organically operating them. Each module is studied for decision making on lane changes and for securing safety through reinforcement learning using a deep learning technique. The autonomous mobile moving body operating to change the driving state has a characteristic where the next operation of the mobile body can be determined only if the definition of the speed determination model (according to its functions) and the lane change decision are correctly preceded. Also, if all the moving bodies traveling on a general road are equipped with an autonomous driving function, it is difficult to consider the factors that may occur between each mobile unit from unexpected environmental changes. Considering these factors, we applied the decision model to the platform and studied the lane change decision system for implementation of the platform. We studied the decision model using a modular learning method to reduce system complexity, to reduce the learning time, and to consider model replacement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.687-692
• /
• 2018

In this paper, the development of an automotive thermal imaging camera providing image information for ADAS (Advanced Driver Assist System) and autonomous vehicles is described and an improved technique to enhance the details of the image is proposed. Thermal imaging cameras are used in various fields, such as the medical, industrial and military fields, for the purpose of temperature measurement and night vision. In automobiles, they are utilized for night vision systems. For their utilization in ADAS and autonomous vehicles, appropriate image resolution and enhanced detail are required for object recognition. In this study, a $640{\times}480$ resolution thermal imaging camera that can be applied to automobiles is developed and the BDE (Block-Range Detail Enhancement) technique is applied to improve the details of the image. In order to improve the image detail obtained in various driving environments, the block-range values between the target pixel and the surrounding 8 pixels are calculated and classified into 5 levels. Then, different factors are added or subtracted to obtain images with high utilization. The improved technique distinguishes the dark part of the image by the resulting temperature difference of 130mK and shows an improvement in the fine detail in both the bright and dark parts of the image. The developed thermal imaging camera using the improved detail enhancement technique is applied to a test vehicle and the results are presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.867-874
• /
• 2021

The IoT (Internet of Things) technology is rapidly becoming an important consideration in many engineering fields in the current 4th industrial era. In recent years, the concepts of digital shipbuilding and smart factories have been adopted as trends in shipyards. However, there is active interest in research on implementing autonomous driving in autonomous vehicles and airplanes, which is currently available in commercial form in a limited capacity. The present study is regarding the path-tracking performance of a boat to accomplish an autonomous driving mission using a flight controller (FC) and real-time kinematic (RTK) global positioning system (GPS) based on an open-source Ardupilot; an actual sea test is also performed using this system on a calm lake. The boat's mission is to evaluate the maneuverability of the self-driving process to a specific point and returning to the home position. For a given speed, the difference between the preset mission trajectory and actual operational trajectory was analyzed, and a series of studies were conducted on the applicability of the system to ships. In addition, the movements and maneuverability of the OmniX-type hull with four propellers were investigated, and the driving path-tracking performance was observed to increase by a maximum of 48%.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.253-273
• /
• 2022

Automated vehicles rely on information collected through sensors to drive. Therefore, the uncertainty of the information collected from a sensor is an important to address. To this end, research is conducted in the field of road and traffic to solve the uncertainty of these sensors through infrastructure or facilities. Therefore, this study developed a traffic cone that can maintaing the gaze guidance function in the construction site by securing sufficient LiDAR detection performance even in rainy conditions and verified its improvement effect through demonstration. Two types of cones were manufactured, a cross-type and a flat-type, to increase the reflective performance compared to an existing cone. The demonstration confirms that the flat-type traffic cone has better detection performance than an existing cone, even in 50 mm/h rainfall, which affects a driver's field of vision. In addition, it was confirmed that the detection level on a clear day was maintained at the 20 mm/h rain for both cones. In the future, improvement measures should be developed so that the traffic cones, that can improve the safety of automated driving, can be applied.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.115-122
• /
• 2018

The purpose of this study is to investigate the effect of technology acceptance model (TAM) on behavioral intention in order to grasp the degree of technology acceptance on autonomous driving among the various factors that consumers perceive as unmanned vehicle system becomes commercialized. In addition to the mediating effect of perceived usefulness proposed by the existing TAM, this study proposed the perceived trust (PT) and hypothesized its mediating effect on behavioral intention to use the self-driving. Path anlaysis is adopted to investigate our hypothesis using the structural equation model. The sample used for the analysis was 149 valid data among 160 responses. The effects of total effect, direct effect, and indirect effect were confirmed by hypothesis test on mediating effect. Non-parametric bootstrapping analysis was also performed to confirm the robustness. All the hypotheses were significant and we found a partial indirect effect, which implies that mediation effect of PT on behavioral intention.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.305-311
• /
• 2016

Even though automakers have actively been conducting studies on autonomous navigation thanks to the development and application of wireless Internet technology, the traffic accident has been kept unsolved. The causes of the accident are drowsy driving, a mistake of a driver, environmental factors, and a wrong road structure; Driving manner and characteristics of a driver among the causes are significantly influential for the accident. In this paper, a study to measure characteristics of zigzag driving that can be seen before an occurrence of an accident regarding traffic accidents that can be incurred while driving manually or autonomously was conducted. While existing studies measured zigzag driving based on characteristics of the change of lateral angular velocity by imaging techniques or driving manner on the first and second lane, this study proceeded to measure zigzag driving by setting a lateral moving distance and a critical value range by utilizing the value of a sensor.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.1-3
• /
• 2021

최근 딥러닝 기술에 발전으로 스마트 시티, 자율주행 자동차, 감시, 사물인터넷 등 다양한 분야에서 활용이 되고 있으며, 이에 따라 기계를 위한 영상 압축에 대한 필요성이 대두되고 있다. 본 논문에서는 열 적외선 영상에서 기계 소비를 위한 객체 기반 압축 기법을 제안한다. 신경망의 객체 탐지 결과와 객체 크기에 따라 이미지를 객체 부분과 배경 부분으로 나누어 서로 다른 압축률로 인/디코딩 한 후, 나눠진 이미지들 다시 하나의 이미지로 합치는 기법을 사용하여 압축하였으며, 이는 압축효율은 높이면서 객체 탐지 성능을 높게 유지한다. 실험 결과, 제안하는 방법이 Pareto mAP에서 BD-rate가 -28.92%로 FLIR anchor 결과와 비교했을 때 압축효율이 뛰어나다는 것을 확인할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1553-1559
• /
• 2017

This paper proposes a lane departure detection algorithm using a single camera equipped in front of a vehicle. The proposed algorithm generates a partial top-view image for a small ROI (region of interest) designated on the top-view space form the image acquired by the camera, detects lanes on the small partial top-view image, and makes a decision on the lane departure by checking overlap between the pre-assigned virtual vehicle and the detected lanes. The proposed algorithm also includes the removal of lines occurred by road symbols (noises) disturbing the lane departure detection between lanes and the prediction of lost lanes using lane information of previous fames. In lane departure detection test using real road videos, the proposed algorithm makes the right decision of 99.0% in lane keeping conditions and 94.7% in lane departure conditions.

• Journal of Practical Engineering Education
• /
• v.14 no.3
• /
• pp.593-600
• /
• 2022

Various sensors such as lidar, radar, and camera are fused and used in autonomous vehicles. Rider and radar sensors are difficult to popularize because they are expensive equipment. In order to popularize autonomous vehicles, research that can replace expensive equipment is continuously being conducted. In this paper, we use a single camera that is inexpensive and can be easily mounted. We propose a method for detecting the wheels and adjacent lanes of a front-side vehicle of a driving vehicle and estimating distances. Our proposed method detects lanes and wheels from frame images after frame extraction via input images. In addition, the distance is measured and compared with the actual distance measured in the actual road environment. The distance could be calculated relatively accurately within the error range of ± 3 cm. Through this, it is expected that the camera can be used as an alternative means when the cost of autonomous vehicles is reduced or when the lidar or radar sensor fails.