• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.87-92
• /
• 1993

본 연구에서는 반연성해석(Semi-coupling analysis) 즉 음향 응답이 구조와 음향 시스템의 모달 계수로 표현되는 방법과 구조-음향 연성계수를 이용한 소음저감의 예를 제시한다. 이전까지의 연성해석에서는 해석의 신뢰성을 위 하여 실험에서 구한 구조 모우드를 사용하였다. 그러나 설계단계에서 차실소 음을 예측하고 설계변경의 자료를 제시하기 위해서는 유한요소법을 이용한 예측이 필수적이다. 본 연구에서는 부분 구조 합성법, 주요 결합부에 상세 유한요소 모델의 정적해석등에 의한 등가모델링 기법, 감도해석을 이용한 결 합부 모델링기법을 이용한 유한요소법 구조모우드해석과 그 결과를 이용한 연성해석의 결과를 보여준다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1003-1008
• /
• 2007

Compliance effect consideration method for real-time multibody vehicle dynamics is proposed using quasi-static analysis. The multibody vehicle model without bush elements is used based on the subsystem synthesis method which provides real-time computation on the multibody vehicle model. Reaction forces are computed in the suspension subsystem. According to deformation from the quasi-static analysis using reaction forces and bush stiffness, suspension hardpoint locations and suspension linkage orientation are changed. To validate the proposed method, quarter car simulations of McPherson strut and multilink suspension subsystems. Full car bump run simulations are also carried out comparing with the ADAMS vehicle model with bush elements. CPU times are also measured to see the real-time capabilities of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.162-169
• /
• 2008

Compliance effect consideration method for real-time multibody vehicle dynamics is proposed using quasi-static analysis. The multibody vehicle model without bush elements is used based on the subsystem synthesis method which provides real-time computation on the multibody vehicle model. Reaction forces are computed in the suspension subsystem. According to deformation from the quasi-static analysis using reaction forces and bush stiffness, suspension hardpoint locations and suspension linkage orientation are changed. To validate the proposed method, quarter car simulations of McPherson strut and multilink suspension subsystems are performed. Full car bump run simulations and fish hook handling test simulations are also carried out comparing with the ADAMS vehicle model with bush elements. CPU times are also measured to see the real-time capabilities of the proposed method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.6
• /
• pp.55-64
• /
• 2001

Industrial machines are sometimes exposed to the danger of earthquake. In the design of a mechanical system, this factor should be accounted for from the viewpoint of reliability to analyze a complex nonlinear structure system under random excitation is proposed. First, the actual random excitation, such as earthquake, is approximated to the corresponding Gaussian process for the statistical analysis. The modal equations of overall system are expanded sequentially. Then, the perturbed equations are synthesized into the overall system and solved in probabilistic way. Several statistical properties of a random process that are of interest in random vibration are evaluated in each substructure. Comparing with the results of the numerical simulation proved the efficiency of the proposed method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.26-34
• /
• 2005

In this paper, a novel moving least squares interface welding method is proposed to carry out the coupled analysis of whole model composed of independently modeled finite element substructures with nodal mismatching interfaces. To verify the validity, and efficiency of the proposed interface welding method, various numerical examples are worked out including patch tests, convergence tests, and examples of coupled analyses of the structural systems with mismatching substructures. From the numerical tests, it is confirmed that one can efficiently carry out the coupled analysis of whole model composed of mismatching finite element substructures through the proposed method without any remeshing or any additional unknown.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.199-206
• /
• 2006

Real time vehicle dynamics models have been developed with the subsystem synthesis method for intelligent vehicle HILS system. Three different models for solving subsystem equations are compared in order to find out the best suitable model for HILS applications. The first model is based on the generalized coordinate partitioning technique, and the second one is on the approximate function approach, and the last one is on the constraint stabilization method. To investigate the theoretical efficiency of three proposed methods, arithmetic operators used in the formulations of three models are counted. Bump run simulations with half-sine bump have also carried out with three different models to measure the actual CPU time to validate theoretical investigation.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.395-402
• /
• 2007

Probabilistic risk assessment was conducted on a hybrid cable-stayed bridge consisting of a steel-composite plate girder and a concrete girder with a long span, designed using the working stress design and strength design methods. The component reliabilities of the bridge's cables, pylons, girders, and steel-concrete conjunction were evaluated using the AFOSM(Advanced First Order Second Moment) algorithm and the simulation technique at the critical sections, based on the maximum axial force, shear, and positive and negative moments of the selected sections. For the analysis of system reliability, the hybrid cable-stayed bridge consisting of cables, pylons, and plate girders was modeled into combined failure modes, and for system reliability, the probabilities of failure and reliability index of the structural system were evaluated. Based on the results of this study, the critical failure modes of the hybrid cable-stayed bridge based on the bridge's structural characteristics are suggested, and the efficiency of the partial ETA technique for use in the risk assessment method was confirmed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.57-65
• /
• 2006

An approximate function approach has been developed using the subsystem synthesis method for real-time multibody vehicle dynamics models. In this approach, instead of solving loop closure constraint equations of the suspension linkage, approximate functions are used. The approximate function represents the functional relationship between dependent coordinates and independent coordinates of the suspension subsystem. This kinematic relationship is also included in the suspension subsystem equations of motion. Different order of polynomial functions are tried to find out the best candidate functions. The proposed method is also compared with the conventional subsystem synthesis method to verify its efficiency and accuracy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.359.2-359.2
• /
• 2016

붕소의 높은 융점과 비점으로 인하여 일반적인 합성법으로는 제조가 어려운 붕화금속 나노물질을 효과적으로 합성하기 위하여 열플라즈마의 특성을 전산해석 하였다. RF (Ratio Frequency, 고주파) 열플라즈마 발생기는 일반적인 직류 열플라즈마 발생기와 비교해 볼 때, 전극 침식에 의한 수명 문제나 불순물의 오염 없이 고온의 열플라즈마를 안정적으로 발생시킬 수 있기 때문에 고순도의 나노입자 합성공정에 좋은 조건을 가지고 있다. 그러나 열플라즈마의 고온 부분은 10,000 K 이상의 높은 온도를 가지고 있기 때문에 직접적인 측정으로는 나노입자 합성에 최적의 조건을 찾기가 어렵고, 전산해석을 통하여 여러 변수들에 대한 열플라즈마의 특성을 분석하여야 한다. 해석조건으로 RF 플라즈마의 입력전력은 25 kW로 고정하고 발생기 직경 20~35 mm, 유도코일 감은 수 4~6 회, 첫 번째 코일으로 부터 분말 주입구까지의 길이 10~30 mm, 방전 기체 유량 30~70 L/min에 대한 변수들에 대하여 붕화금속 나노입자 합성에 최적의 조건을 가진 RF 플라즈마의 온도 및 속도분포를 파악하였다. 전산모사 결과 RF 열플라즈마 발생기의 직경 25 mm, 분말주입구 까지의 길이 10 mm, 유도코일 감은 수 6 회, 방전 기체 유량 50 L/min 일 때, 고온영역이 중심부에 넓게 분포하여 붕화금속 나노입자를 합성하는데 최적의 조건이라 파악되었다. 방전 기체 유량 증가에 따라 고온영역의 중심부 분포를 넓게 할 수 있었으나 유량이 증가할수록 플라즈마 속도가 증가하여 붕소를 기화시키기 위한 가열시간이 짧아지므로 방전기체 유량을 조절하여 적절한 속도를 가진 플라즈마를 발생시켜야 한다. 그리고 코일의 감은 수가 증가할수록 10,000 K 이상 고온영역이 출구 쪽으로 확장되어 붕화금속 나노입자를 합성하는데 좋은 조건이 형성되었다. 본 전산해석 결과를 바탕으로 붕화금속 나노입자를 합성하는 RF 플라즈마 발생장치의 설계 및 운전조건을 적용하여 실험과의 비교연구를 통해 붕화금속 나노입자의 합성공정을 최적화 시킬 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.45-54
• /
• 2011

This paper discuss about structure modification method of the reciprocating compressor to reduce its vibration and noise in small refrigeration system. The structure modification is applied using analytic FE models and then applying suggested Component Mode Synthesis(CMS) algorithms. The efficient CMS algorithms to a compressor's fixed base design problem are analytically tried and verified from some experiments.