• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.5
• /
• pp.355-363
• /
• 2021

Heat resistance performance evaluation and thermal analysis were performed to confirm the applicability of the lyocell-based carbon/phenolic composite material for heat-resistant parts for aerospace. Heat resistance performance evaluation of carbon/phenolic was conducted by Thermal Protection Evaluation Motor (TPEM). In this paper, boundary layer integration code considering the boundary layer analysis of combustion gas and MSC-Marc 2018 considering ablation and thermal pyrolysis were used for the thermal analysis. The ablation and thermal insulation performance were analyzed by the pressure curve of test motor and the cut carbon/phenolic specimens. The thermal response of the lyocell-based carbon/phenolic material was similar to that of the rayon-based carbon/phenolic material. Based on the results through the combustion test, the applicability of heat-resistant parts for aerospace to which domestic lyocell-based carbon fibers were applied was confirmed.

• Composites Research
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2002

In this study, the flutter analysis for a rectangular box wing and an actual fighter wing with composite shin, aluminum spar and aluminum rib has been conducted. A conservative 3D wing-box model of an actual wing is modeled by MSC/PATRAN and the corresponding free vibration analysis has been performed by MSC/NASTRAN. The finite elements of membrane, rod and shear panel are used. Using the practical ply angles, various composite laminates are composed and analysed. The DLM code which is linear aerodynamic theory in frequency domain is applied to calculate unsteady aerodynamic pressure in subsonic flow region and the V-g and p-k methods are applied to obtain the solution of aeroelastic governing equation in frequency domain.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.90-100
• /
• 1993

A finite element formulation of vibration control of a laminated plate with piezoelectric sensor/ actuators is presented. Classical lamination theory with the induced strain actuation and Hamilton's principle are used to formulate the equations of motion of the system. The total charge developed on the sensor layer is calculated from the direct piezoelectric equation. The equations of motion and the total charge are discretized with 4 node, 12 degrees of freedom quadrilateral plate bending elements with one electrical degree of freedom. The mass and stiffness of the piezoelectric layer are introduced by treating them as another layer in laminated plate. Piezoelectric sensor/actuators are distributed, but discrete due to the geometry of electrodes. By defining an i.d. number of electrode for each element, modelling of electrodes with variable geometry can be achieved. The static response of a piezoelectric bimorph beam to electrical loading and sensor voltage to given displacement are calculated. For a laminated plate under the negative velocity feedback control, the direct time response by the Newmark-.betha. method and damped frequencies and modal damping ratios by modal state space analysis are derived.

• Journal of International Area Studies (JIAS)
• /
• v.14 no.4
• /
• pp.79-106
• /
• 2011

The cultural contents industries have moved closer to the centre of the economic action in many countries and across much of the world. For this reason, the concern with the development of glocal cultural contents has also been growing. According to Goldman Sock's BRICs report, Indian economy will be the engine of global economy with China. In addition, India will be a new blue chip country for large consumer market of cultual contents. The most important point for the development of glocal cultural contents is a systematic and in-depth analysis of other culture. India is a complex and multicultural country compared with Korea which is a nation-state. Therefore, this paper is intended as an understanding about India appropriately and suggestion for a strategy to enter cultural industry in India. As the purpose of this paper is concerned, we will take a close look at 9 Indian culture codes which can be classified into three main groups: 1) political, social and cultural codes 2) economic codes 3) cultural contents codes. Firstly, political, social and cultural codes are i) consistent democracy and saving common people, ii) authoritarianism which appears an innate respect for authority of India, iii) Collective-individualism which represents collectivist and individualistic tendency, iv) life-religion, v) carpe diem. Secondly, economic culture codes are vi) 1.2billion Indian people's God which represents money and vii) practical purchase which stands for a reasonable choice of buying products. Lastly, viii) Masala movie and ix) happy ending that is the most popular theme of Masala movies are explained in the context of cultural content codes. In conclusion, 3 interesting cases , , will be examined in detail. From what has been discussed above, we suggest oversea expansion strategy based on these case studies. Eventually, what is important is to understand what Indian society is, how Indian society works and what contents Indian prefers.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.165-175
• /
• 2015

Methods to design programs which implement IT systems have been developed in various forms from flowchart to activity diagram of UML. However, program design tools and methods developed so far have not been efficient comparing to program coding tools and methods. In addition, Program design methods and tools developed until now have been difficult to support the bidirectional conversion between program design and coding, and the improvement of development productivity and maintainability. Therefore, in this study, we propose Convergence Development Method to enable working with wide bandwidth through fusing the program design and coding phase by using SOC and supporting tool named SETL which automatizes the convergence of design and coding. Thus, by using SETL, it is expected that the efficiency gap between the program design and coding phase is reduced, and development productivity and maintainability is increased. key words.

• Composites Research
• /
• v.25 no.5
• /
• pp.136-140
• /
• 2012

This paper describes the bone healing process of fractured long bones such as a tibia applied by composite IM rods using finite element analysis. To simulated tissue differentiation process mechano-regulation theory with a deviatoric strain was implemented and a user's subroutine programmed by a Python code for an iterative calculation was used. To broadly find the appropriate rod modulus for healing bone fractures, composite IM rods were analyzed considering the stacking sequence. To compare mechanical stimulation at fracture gap, two kinds of initial loading conditions were applied. As a result, it was found that the initial loading condition was the most sensitive factor for the healing performance. In case a composite IM rod made of a plain weave carbon fiber/epoxy (WSN3k) had a stacking sequence of $[{\pm}45]_{nT}$, the healing efficiency was the most effective under a initial load of 10%BW.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.235-241
• /
• 2016

Among recent issues emerging in the areas related to the society, health has received the most attention. In this paper, for a patient unable to do self-care because of worsened diseases, a biological information transfer method is proposed by which the disease information can be securely managed, by attaching an implantable device into the body. Our method object of the invention is to prevent a third party from illegally intercepting and interfering with the biological information attached to the insertion device in the body. In the proposed technique to improve the safety of the patient between the hospital and physician by assigning each code to the biometric information of the patient in order to prevent a third party tapping and interfering. In addition, our method is assigned a code necessary for encoding in advance to confirm the biological information between the patient and the hospital (doctor) in a manner dividing the bio-information code. In particular, the proposed technique makes a third party unable to illegally tap or interfere in, by previously generating a code used for encoding so that it can be stored in the database of the hospital, which not only decreased hospital care time to 6.9%, but also increased work efficiency rate up to 12.7%.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.22-28
• /
• 1999

Small amplitude in-phase oscillations of multi-cylinders are considered both numerically and experimentally. Flow field is separated into inner and outer regions. The basic unsteady solution is obtained analytically and the secondary flow, termed as steady streaming flow, can be obtained numerically by using Finite Volume Code with Panel Method. The Particle Induced Velocimetry, one of whole field measurements, is introduced for comparison with numerical flow visualization quantitatively. Among the algorithms for PIV, the Three Step Vector Searching Technique is applied to reduce CPU time. Small but non-zero damping coefficient, that is important in lightly damped system can be obtained with varying number of bodies and distances.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1581-1587
• /
• 2021

As embedded system are used widely and variously, multi-edge system, which multiple edges gather and perform complex operations together, is actively operating. In a multi-edge system, it often occurs that an abnormal operation at one edge is transferred to another edge or the entire system goes down. It is necessary to determine and control edge anomalies in order to prevent system down, but this can be a heavy burden on the resource-limited edge. As a solution to this, we use power consumption data to check the state of the edge device and transmit it based on a QRcode to check and control errors at the server. The architecture proposed in this paper is implemented using 'chip-whisperer' to measure the power consumption of the edge and 'Raspberry Pi 3' to implement the server. As a result, the proposed architecture server showed successful data transmission and error determination without additional load appearing at the edge.

• Design Convergence Study
• /
• v.16 no.6
• /
• pp.137-152
• /
• 2017

This research aims to develop the companion robot experience design for elderly in korea based on needs-function deploy matrix of robot and emotion expression research of robot in multimodal interaction. First, Elder users' main needs were categorized into 4 groups based on ethnographic research. Second, the functional elements and physical actuators of robot were mapped to user needs in function- needs deploy matrix. The final UX design prototype was implemented with a robot type that has a verbal non-touch multi modal interface with emotional facial expression based on Ekman's Facial Action Coding System (FACS). The proposed robot prototype was validated through a user test session to analyze the influence of the robot interaction on the cognition and emotion of users by Story Recall Test and face emotion analysis software; Emotion API when the robot changes facial expression corresponds to the emotion of the delivered information by the robot and when the robot initiated interaction cycle voluntarily. The group with emotional robot showed a relatively high recall rate in the delayed recall test and In the facial expression analysis, the facial expression and the interaction initiation of the robot affected on emotion and preference of the elderly participants.