• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.24-26
• /
• 2000

공간 데이터는 복합적인 속성들의 조합으로 이루어지며 연산 또한 복합적이라는 점에서 일반 데이터와 다른 특성을 갖는다. 따라서 공간 데이터는 일반 속성 데이터와 구별되는 파일이나 별도의 저장 구조를 사용하여 관리되어야 한다. 이것은 비공간 데이터와 공간 데이터간의 상호 동기화 문제와 트랜잭션의 처리 등에서 많은 문제점을 발생시키며 이를 해결하기 위해서는 공간 데이터와 비공간 데이터를 단일 데이터베이스화하여야 한다. 이 논문에서는 이러한 단일화된 데이터베이스 시스템을 지원하기 이한 공간 객체-관계 데이터 모델을 정의하고 이 모델을 구현하기 위한 타입 저장 방법들에 대해 기술한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.261-264
• /
• 2008

Recently, as necessity for urban recycling has increased, the research on integrated multi-purpose space has been required. Development of the system for integrated multi-purpose space is needed to form the efficient and higher value-added space. In this research, the notion of integrated multi-purpose space is defined and two proposed structural system, which are space truss and mega structure system, are compared. Mega structure system has been found as more proper system and proposed for analysis. As verified by the number of mega beam and shape of mega column, the analysis has been carried out. The results show that mega structure system offers proper performance for integrated multi-purpose space.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2012

A model for the nonlinear flexural analysis of extruded Engineered Cementitious Composite (ECC) panel reinforced concrete (RC) composite slab has been newly presented. From direct tensile test, ECC panel has been modeled to have the high-ductile tensile behavior after cracking. The developed model was compared with bending test results of two specimens, a conventional RC slab and a ECC panel RC composite slab. The predicted results were well patched with the experimental results, and the ECC panel RC composite slab system had advantages in crack control and improving flexural load-carrying capacity and deformation-capacity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.4
• /
• pp.279-285
• /
• 2012

In this paper a computational method for a homogenized peridynamics description of unidirectional fiber-reinforced composites is presented. For these materials, dynamic brittle fracture and damage are simulated with the proposed peridynamic model. Compared with observations from dynamic experiments by Coker et al.(2001), the peridynamic computational model can reproduce various characteristics of dynamic fracture and supersonic or intersonic crack growth in asymmetrically loaded unidirectional fiber-reinforced composite plates. Also we analyze the same model in the symmetric loading condition and figure out that the asymmetric loading leads to a much higher propagation speed. Consistent results have been reported in the experiments.

• Composites Research
• /
• v.33 no.6
• /
• pp.377-382
• /
• 2020

The free vibration characteristics of corrugated laminated composite plates with axial stiffeners is investigated using the Rayleigh-Ritz method. The plate is stiffened by beams with open cross-section area. The equivalent homogenization model is used for the corrugated laminated composite plates. This homogenization model is treated a corrugated plate as an orthotropic plate that has different material properties in two perpendicular directions. The motion of equivalent plate is represented on the basis of the first order shear deformation theory (FSDT) to account for the effect of rotary inertia and transverse shear deformation. Stiffeners are considered as discrete elements to predict the local vibration mode to be generated by the presence of stiffeners. To validate the proposed analytical approach, natural frequencies and vibration mode shapes from the analytical method are compared with those from the FEA by ANSYS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.92-98
• /
• 2017

Porosity in polymer matrix composites generated during pyrolysis process affect the thermomechanical behavior of the composites. In this paper, multislice finite element models for the porous composite materials are developed, and poroelastic and failure analysis for these models are performed. In order to investigate the three-dimensional effects, finite element meshes are modeled considering different porosity(up to 0.5) and the number of slices (up to five). As a result, effective Young's moduli and poroelastic parameters exhibit the maximum differences of 74.0% and 442.1% with respect to porosity respectively, and 98.7% and 37.2% with respect to the number of slices. First and last failure strengths are decreased 88.2% and 90.0% with respect to porosity respectively, and 53.8% and 171.8% with respect to the number of slices.

• Composites Research
• /
• v.22 no.3
• /
• pp.66-73
• /
• 2009

Total thickness, areal density and mass moment of inertia of materials are important material factors for structural characteristics. In this work, a material-structural optimization was performed up to the maximum ballistic limit of multi-layered composite structures under high impact velocity followed by the investigation of the influence of these factors on an impact absorption performance. A unified model combined with Florence's and Awerbuch-Bonder's models was used in optimizing the multi-layered composite structure consisting of CMC, rubber, aluminum and Al-foam. Total thickness, areal density and mass moment of inertia were used for the optimization constraint. As shown in the results, the ballistic limit determined from a newly developed unified model was closely similar to the finite clement analysis. Additionally, the ballistic limit and impact absorption energy obtained by the optimized structure were improved approximately 16.8% and 26.7%, respectively comparing with a not optimized multi-layered structure.

• Geophysics and Geophysical Exploration
• /
• v.21 no.1
• /
• pp.15-25
• /
• 2018

Seismic inversion is a high-resolution tool to delineate the subsurface structures which may contain oil or gas. On the other hand, marine controlled-source electromagnetic (mCSEM) inversion can be a direct tool to indicate hydrocarbon. Thus, the joint inversion using both EM and seismic data together not only reduces the uncertainties but also takes advantage of both data simultaneously. In this paper, we have developed a simultaneous joint inversion approach for the direct estimation of reservoir petrophysical parameters, by linking electromagnetic and seismic data through rock physics model. A cross-gradient constraint is used to enhance the resolution of the inversion image and the maximum likelihood principle is applied to the relative weighting factor which controls the balance between two disparate data. By applying the developed algorithm to the synthetic model simulating the simplified gas field, we could confirm that the high-resolution images of petrophysical parameters can be obtained. However, from the other test using the synthetic model simulating an anticline reservoir, we noticed that the joint inversion produced different images depending on the model constraint used. Therefore, we modified the algorithm which has different model weighting matrix depending on the type of model parameters. Smoothness constraint and Marquardt-Levenberg constraint were applied to the water-saturation and porosity, respectively. When the improved algorithm is applied to the anticline model again, reliable porosity and water-saturation of reservoir were obtained. The inversion results indicate that the developed joint inversion algorithm can be contributed to the calculation of the accurate oil and gas reserves directly.

• Korean Journal of Plant Resources
• /
• v.31 no.2
• /
• pp.109-116
• /
• 2018

Erectile dysfunction (ED), also known as impotence, is the inability to attain and sustain an erection firm enough to have sexual intercourse. Frequent ED may be a symptom of health problems including heart disease, obesity, alcoholism, stress, smoking, and depression, that need treatment. This study aimed to effect of complex extract (CPL) including Cornus officinalis on sexual function factor in the erectile dysfunction rat model. The erectile dysfuction rat model was induced by cimetidine (500 mg/kg in 5% ethanol, oral injection 2 weeks). Rats were oral administered with different concentration of CPL in rat erectile dysfunction model. As a results, sexual function factors (NO, cGMP) significantly improved in CPL treated groups (CPL-300, 600, 900 mg/kg) compared to CON group. Serum testosterone was increased in a dose-dependent manner after CPL treatment. Furthermore, administrations of CPL restored lumen areas of the prostate in the erectile dysfunction rat model. These results indicated that CPL alleviated erectile dysfunction by increasing sexual function factor and testosterone in rat model. CPL could be used to natural treatement for erectile dysfunction. However, further study is required to identify active ingredient and its mechanism of erectile dysfunction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.4
• /
• pp.11-18
• /
• 2006

Compound flow by confluence of two parallel flows through a convergent channel and its choking phenomenon are calculated by one-dimensional isentropic model and completely mixing model. Optical observations and pressure measurements for subsonic/subsonic compound flows are carried out and compared with the results of one-dimensional calculations. As a result, it is found that inlet conditions of one flow influence the behavior of the other flow as well as the choking condition and present experimental data agree well with the results of one-dimensional calculations.