• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.105-114
• /
• 2018

In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.239-249
• /
• 2001

The purpose of this study is to evaluate the relationship of the factors which could be influenced by orthognathic surgery especillay SSRO. We measured the amounts of the maximum opening, lateral movements, maximum velocity and pattern of mandibular path during the opening and closing of mandible at the following times ; preoperative, 1 month after operation, 6 months after operation respectively using MKG. And the results were compared according to the categorized subgroups. Following results were obtained : 1. The change of the amounts of mandibular lateral movement and maximum opening velocity were statistically different between male and female (p<0.05), but the others were not. 2. According to the method of operation, there was no difference in the change of the mandibular movements between the group of SSRO and SSRO plus LeFort I osteotomy (p>0.05). 3. According to the amounts of mandibular movement, the recovery of left lateral movement of the group of $6{\sim}10mm$ was better than the other groups (p<0.05). 4. In the frontal pattern of the opening and closing of the mandible, the complex deflected type (F5), simple deflected type (F4), complex deviated type (F3), simple deviated type (F2), straight type (F1) were obtained in order at the time of preoperative, simple deflected type, simple deviated type, complex deviated type, straight type, complex deflected type in order at the time of 1 month after surgery, and the result at the time of 6 months after surgery was the same with that of the time of preoperative. In the sagittal pattern, non-coincident type (S2) was predominant at the time of preoperative, and coincident type (S1) was predominant at the time of 1 month after surgery. After 6 months, the result was also the same with that of the preoperative in sagittal pattern. 5. There was not a statistical difference in the change of the mandibular movement between group of presence of the preoperative TMJ symptoms and non-presence group (p>0.05). 6. There was not a statistical difference in the change of the mandibular movement between repositioning device applied group and non-applied group (p>0.05). 7. Sixty three percents of the patients who had preoperative TMJ symptoms were improved after surgery and preoperative TMJ symptoms were more improved after operation in the repositioning device non-applied group statistically (p<0.05).

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.135-153
• /
• 2013

This study aims to investigate the overall relationship between the deterring and facilitating factors in export activities of the small and medium export companies. Nine export deterring factors are analyzed by multinational dimensional scaling(MDS) method to identify key dimensions underlying those factors. Perceptual mapping shows that some factors such as brand image, operating capital and e-trade infra are found similar in its degree of difficulties in export activities. Regression analysis shows that government export promotion measures might play an effective export facilitating factors to ease the export deterring factors like market information and manufacturing skill. Whereas difficulties arising from e-trade infra, operating capital, and brand image might be eliminated by internal competency of company, difficulties from distribution channel might be lessened by overseas orientation of chief executive of company.

• Journal of Convergence Society for SMB
• /
• v.3 no.1
• /
• pp.49-55
• /
• 2013

This study is for preparation a solution develop small suppliers. For this goal survey for the buyers, agents, supplier's situation and difficulties, policy and support systems. And After benchmark the other's countries, develop government policy, suppoet systems. As a results, the support must be made for public organization, small suppliers. The Response direction must be made for agents and private buyers. At the point of support systems, public organizations must implement the purchase systems and provide the verified informations of suppliers. And it's necessary to educate marketing and sales solutions. At the point of Response directions, it's necessary to make a standard for supply replaced MRO. And the beginning positioning directions of MRO-mall is needed to stress the differentials with private suppliers.

• The Journal of Society for e-Business Studies
• /
• v.18 no.4
• /
• pp.215-240
• /
• 2013

This research has reviewed the major composition concepts and the positive research results in the selected studies which were theoretically based on IDT (Innovation Diffusion Theory), IRM (Model of Innovation Resistance), TAM(Technology Acceptance Model), and IAPA(Information Asset Protection Activity) in order to improve the theoretical explanation of major characterized factors influencing on the introduction of MST (Mobile Security Technology). The characterized factors for the adaptation of MST and 17 hypotheses on the MST study models in order to test the effects on the intention to use are empirically verified by utilizing the analysis method of structure equation model. As a result of a study, First, the most influential characterized factors of IRM are shown as compatibility, complexity, relative advantage, information asset protection in order. Second, the characterized factors affecting intention to use are shown as relative advantage, compatibility, innovation resistance, performance expectancy. The results of this study are relevantly significant to establish the theoretical foundation of the study on the adaptation of MST and The verification of the characterized factors provide strategic implication for the introduction of MST and policy direction which alleviates informational gap between new MST and previous Security Technology to diffusion agency.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.249-257
• /
• 2007

The periodic square wave (PSW) model was successfully applied to the optimal design of a batch-storage network. The network structure can cover any type of batch production, distribution and inventory system, including recycle streams. Here we extend the coverage of the PSW model to multitasking semi-continuous processes as well as pure continuous and batch processes. In previous solutions obtained using the PSW model, the feedstock composition and product yield were treated as known constants. This constraint is relaxed in the present work, which treats the feedstock composition and product yield as free variables to be optimized. This modification makes it possible to deal with the pooling problem commonly encountered in oil refinery processes. Despite the greater complexity that arises when the feedstock composition and product yield are free variables, the PSW model still gives analytic lot sizing equations. The ability of the proposed method to determine the optimal plant design is demonstrated through the example of a high density polyethylene (HDPE) plant. Based on the analytical optimality results, we propose a practical process optimality measure that can be used for any kind of process. This measure facilitates direct comparison of the performance of multiple processes, and hence is a useful tool for diagnosing the status of process systems. The result that the cost of a process is proportional to the square root of average flow rate is similar to the well-known six-tenths factor rule in plant design.

• The Journal of Natural Sciences
• /
• v.15 no.1
• /
• pp.11-34
• /
• 2005

It is no exaggeration to say that the productivity of a research using computer simulations on complex molecular systems like biomolecules depends on the ability of the sampling algorithm to explore the relevant parts of configuration space. In this study, we investigate the properties on the mutiensemble sampling (MES) which is one of the solutions that surmount limitations of conventional sampling algorithms. Works for finding out practical systematic ways of using the MES efficiently to explore distantly separated regions in configuration space are performed. In this work, the more generalized form of weighting function for MES is used and 'cavity formation in water' is simulated using Monte Carlo. investigating the correlation of simulation parameters and the efficiency of the method, we propose a practical way of maximizing the power of the MES. We applied the way to 'cavity formation in water' and were able to explore the parts of configuration space relevant to cavities of radius from 0 to 5.6A in a single simulation.

• Journal of Yeungnam Medical Science
• /
• v.25 no.1
• /
• pp.64-71
• /
• 2008

Evaluation of a fever of unknown origin (FUO) is complex. Recently, PET scanning has been approved for screening in FUO evaluation. We treated three cases of FUO associated with increased FDG uptake in the bone marrow of the femur and tibia on the fusion PET/CT; all three had the same pattern of uptake. Bone marrow biopsies revealed mature lymphocyte and histiocyte infiltration and myxoid changes in one case, and cortical bone involvement in another case. The cases were all young females who had fever with neutropenia and relative lymphocytosis that lasted for several weeks and then remitted spontaneously. Even though the results of the studies were not diagnostic, the unique uptake pattern on PET/CT and the histology might be related to the cause of the illness and should be studied further to assess the association with classic FUO.

• Journal of Aerospace System Engineering
• /
• v.12 no.5
• /
• pp.76-88
• /
• 2018

Space agencies such as NASA, ESA, and the US military provide guidelines and standards for PA(product assurance) requirements and plans. In recent years, major satellite manufacturers around the world have been mitigating PA requirements and processes by tailoring. PA tailoring has been implemented to improve the cost and schedule efficiency. PA tailoring can be accomplished based on various factors such as mission, classification of mission risk, complexity, development cost, life cycle, etc. In this study, PA tasks according to the mission risk classification proposed by NASA are investigated, and the tailoring method is suggested for the optimization of the development cost and schedule. In particular, the classification of mission risk for the satellites under development or operation in Korea is performed, and PA characteristics in accordance with mission risk are analyzed.

• Journal of the Korea Society for Simulation
• /
• v.25 no.3
• /
• pp.117-123
• /
• 2016

This paper presents inference methods for inner operations of a multi-server queue when historical data are limited or system observation is restricted. In a queueing system analysis, autocorrelated arrival and service processes increase the complexity of modeling. Accordingly, numerous analysis methods have been developed. In this paper, we introduce an inference method for specific situations when external observations exhibit autocorrelated structure and and observations of internal operations are difficult. We release an assumption of the previous method and provide lemma and theorem to guarantee the correctness of our proposed inference method. Using only external observations, our proposed method deduces the internal operation of a multi-server queue via non-parametric approach even when the service times are autocorrelated. The main internal inference measures are waiting times and service times of respective customers. We provide some numerical results to verify that our method performs as intended.