• The Journal of Engineering Geology
• /
• v.30 no.2
• /
• pp.185-198
• /
• 2020

High-density rapid expansion material is a method that increases the solid volume of injection materials due to hydration and foam reactions at the same time as spraying. It is an effective method for securing ground stability, restoring subsidence, and loading during construction of structures. In this regard, through the mechanical experiments of injection materials, the stability of the foundation ground of the structure and the effect of increasing the endurance using site construction were analyzed. The results of the experiment showed that the unit weight of soil decreased by 10.5% after injection of the filling material, and the allowable support for the structure was deemed safe, and the subsidence by each section after ground improvement was determined to be safe at 2.28, 1.55 and 0.46 cm, respectively, with an acceptable subsidence of less than 5 cm. After the field test, five inclinometers were installed on the top floor of the target building to measure the displacement of the X and Y axes. As a result of the measurement, no displacement related to the phenomenon of inequality or subsidence cracks of the structure was measured for about 16 months (509 days) after construction. This can be judged to be a sufficient increase in the stability of the ground after the injection of rapid expansion.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.393-398
• /
• 2003

Effects of convection oven dehydration conditions on the physicochemical and sensory properties of ginkgo nut powder were examined using three types of pre-treatment on ginkgo nuts: coarse grinding of ginkgo nut (GR); coarse grinding followed by 1 min blanching (GB); 3 min blanching followed by coarse grinding (BG). Pretreated ginkgo nuts were dried in convection oven at 70 and $80^{\circ}C$ to the moisture content of approximately 5%. Rehydration rate, swelling power, solubility, lightness, and greenness of GB ginkgo nut powder dried at $70^{\circ}C$ were the most similar to those of freeze dried one. GR and GB samples dried at $70^{\circ}C$ had higher sensory values of green color and ginkgo nut flavor. Ginkgo nut powder with desirable quality attributes could be produced by drying GB in convection oven at $70^{\circ}C$ for 10 hr.

• Journal of the Korean earth science society
• /
• v.41 no.1
• /
• pp.19-30
• /
• 2020

To understand the impact of typhoons on Gamji gravel beach Taejongdae in Busan, we carried out beach profiling using a VRS-GPS system and a Drone photogrammetry for the typhoons 'Kong-rey' invaded in October 2018 and 'Danas' in July 2019. In addition, grain sizes are analyzed to investigate the overall distribution pattern of gravels on the beach, and the beach topography is surveyed periodically to confirm the recovery rate of the beach. Grain-size analysis reveals that mean gravel sizes, in general, become finer from -6.2Φ to -5.4Φ towards the east in the seashore line direction. Variation in mean sizes is obviously observed in the cross-shore direction. Gravels in the swash zone are relatively fine about -4.5Φ in size and equant in shape, whereas the coarse and oblate gravels ranged from -5Φ to -6Φ are found in the berm. Gamji gravel beach particularly has two lines of berms: a lower berm situated facing beach and an upper berm about 10 m landward. After the typhoon Kong-rey passed by, about 1.4 m of severe erosion in upper berm occurred, and the berm eventually disappeared. On the backshore of the upper berm about 50 cm of erosion took place so that the elevation became lower. However, tangible erosion was not observed in the lower berm. When typhoon Danas hit, rated as mild storm, both upper and lower berm were eroded out. However, about 50 cm of deposition occurred only in the backshore. Only three days later, the new lower berm was formed, meaning that sedimentation rate must be high. This result indicates that Gamji gravel beach is recovered very fast from erosion caused by the typhoons when it is under the fair-weather condition even though beach morphology changes dramatically in a short period of time. Gravel beach is estimated to be or evaluated very resilient to typhoon erosion.

• Journal of the Korean Orthopaedic Association
• /
• v.56 no.1
• /
• pp.51-60
• /
• 2021

Purpose: Radiocarpal dislocation (RCD), which is caused by high-energy trauma, often involves radial styloid fractures and short radiolunate ligament (SRLL) injuries. Although SRLL injuries may occur as a simple rupture at the attachment site of radius, it may occur with a relatively large avulsed-fragment in the volar rim of the lunate facet of the radius. This study aimed to differentiate the injury type of SRLL and assess the differences in the treatment results depending on the treatment methods that have been applied in RCD with radial styloid fractures. Materials and Methods: Eighteen patients managed surgically with RCD were enrolled in this study. The patients were classified as Group 1 and Group 2 by using the Dumontier method. In this study, Group 2 was subdivided into 2A (purely ligamentous or small avulsion fracture of the volar rim of lunate facet) and 2B (large avulsed-fragment enough to internal fixation) according to the injury type of SRLL. Groups 2A and 2B were treated with direct repair and screw fixation, respectively. Pain, range of motion of the wrist joint, grip strength, and complications on final radiographs were examined. The outcomes were evaluated using patient-rated wrist evaluation (PRWE), and modified Mayo wrist score (MMWS). Results: All patients were Group 2 (six and twelve patients in 2A and 2B, respectively). The mean flexion to extension arch recovered 79%,and the mean grip strength was 72.9% of the uninjured side. Group 2A showed better recovery in extension, flexion and pronation than Group 2B, but there was no difference in radial deviation, ulnar deviation, supination, grip strength and pain. No differences in the PRWE and MMWS were observed between two groups. Complications included traumatic arthritis in seven patients and residual instability in five patients. Conclusion: When the SRLL was injured, the involvement of a large avulsion fracture on the anterior plane of the radiolunate did not affect the test results. On the other hand, it should be observed cautiously because avulsion fractures tend to disturb the joint's reduction through rotation or displacement. In addition, anatomical reduction and sturdy internal fixation are important for restoring the function of the SRLL.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2012

The stagnant growth in 3D market due to 3D movie contents shortage is encouraging development of techniques for production cost reduction. Elimination of vertical disparity generated during image acquisition requires heaviest time and effort in the whole stereoscopic film-making process. This matter is directly related to competitiveness in the market and is being dealt with as a very important task. The removal of vertical disparity, i.e. image rectification has been treated for a long time in the photogrammetry field. While computer vision methods are focused on fast processing and automation, photogrammetry methods on accuracy and precision. However, photogrammetric approaches have not been tried for the 3D film-making. In this paper, proposed is a photogrammetry-based rectification algorithm that enable to eliminate the vertical disparity precisely by reconstruction of geometric relationship at the time of shooting. Evaluation of proposed algorithm was carried out by comparing the performance with two existing computer vision algorithms. The epipolar constraint satisfaction, epipolar line accuracy and vertical disparity of result images were tested. As a result, the proposed algorithm showed excellent performance than the other algorithms in term of accuracy and precision, and also revealed robustness about position error of tie-points.

• Korean Journal of Social Welfare
• /
• v.67 no.4
• /
• pp.251-277
• /
• 2015

This qualitative study is designed for the reconstruction of the experience of single mothers in poverty based on the bottom-up approach. Welfare dependency is identified as vital help to protect their own and children's lives, through their stories telling that welfare services provided by government and community take care of them "in place of their husbands", and "raise them up by hand." What is self-sufficiency to them is more of a process-orientation through welfare dependency than a state out of it, and a way to look through building their self-esteem and working to discover their self-worth except their economic power. Restoring their potential to self-sufficiency through dealing with their psycho-social stresses and expanding services for them related to child-care(education) and occupation ability development for long-term self-sufficiency, rather than hasty focusing on welfare exit, should be built on the foundation of helping them self-sufficient. In order for the self-sufficiency program to overcome the participant's images of "subordination and stigma" and to convey the original meaning of "welfare to work", the performance and evaluation system of self-sufficiency programs that reflects the insider's perspectives on their participation motive and process, and the self-sufficiency program customized for their needs and interests should be encouraged to develop.

• Journal of the Korea Concrete Institute
• /
• v.21 no.5
• /
• pp.589-597
• /
• 2009

High Performance Fiber-reinforced Cement Composite (HPFRCC) shows the multiple crack and damage tolerance capacity due to the interfacial bonding of the fibers to the cement matrix. For practical application, it is needed to investigate the fractural behavior of HPFRCC and understand the micro-mechanism of cement matrix with reinforcing fiber. This study is devoted to the investigation of the AE signals in HPFRCC under monotonic and cyclic uniaxial compressive loading, and total four series were tested. The major experimental parameters include the type and volume fraction of fiber (PE, PVA, SC), the hybrid type and loading pattern. The test results showed that the damage progress by compressive behavior of the HPFRCC is a characteristic for the hybrid fiber type and volume fraction. It is found from acoustic emission (AE) parameter value, that the second and third compressive load cycles resulted in successive decrease of the amplitude as compared with the first compressive load cycle. Also, the AE Kaiser effect existed in HPFRCC specimens up to 80% of its ultimate strength. These observations suggested that the AE Kaiser effect has good potential to be used as a new tool to monitor the loading history of HPFRCC.

• Korean Journal of Environmental Biology
• /
• v.24 no.1 s.61
• /
• pp.38-45
• /
• 2006

Ecological characteristics of microbial populations inhabiting heavy metal polluted soil were investigated. The samples were collected from 293 sites around an factory and industry at Gyeoungsangbuk-do. We measured the contents of seven heavy metal elements (Cd, Cu, As, Hg, Pb, $Cr^{6+}$, CN), seven sites have been seriously contaminated by mercury and chrome. A quantitative evaluation of microbial populations in mercury and chrome contaminated soil was examined by using plate count method. Bacterial numbers in polluted soil samples ranged from $7.4X10^5\;to\;9.3X10^7\;cfu\;g^{-1}$, about $10\sim100$ fold less than the count for the unpolluted soil. Moulds were not detected in chrome polluted soil. The log values of actinomycetes of each contaminated soil samples were log ranged from 6.18 to 7.52. The ratio of actinomycetes was similar to unpolluted soil. The investigation showed actinomycetes to be the major microbial population inhabiting the mercury and chrome polluted soil. Thirty-one isolates among the total isolates were examined for antibacterial activity. These isolates were identified based on a phylogenetic analysis using 16S rRNA gene nucleotide sequences, they were categorized in three major phylogenetic groups, belong to the Streptomyces (6 strains), Saccharopolyspora (3 strains), Nocardiodes (1 strain). On the phylogenetic tree, the clade consisting of five isolates were distantly related to all of the established Streptomycetes genera, indicating the possibility as members of new species.

• Proceedings of the KGS Conference
• /
• 2002.05a
• /
• pp.120-123
• /
• 2002

본 연구는 농천어메니티의 개념을 토대로 농촌주민과 도시민의 가치라고 할 수 있는 정주기능으로서의 생활자원화와 방문가치로서의 관광자원화로 구분하고, 이를 토대로 도시민과 농촌주민, 전문가들을 대상으로 농촌자원의 중요도와 순위적 관계를 분석하였다. 구체적인 연구결과를 살펴보면 다음과 같다. 첫째, 농촌자원을 자연적 자원과 문화적 자원, 사회적 자원으로 구분하여 37개 자원을 설정하였다. 이러한 농촌자원은 농촌어메니티를 형성하거나 형성에 영향을 미치는 대상이라고 볼 수 있다. 둘째, 이러한 농촌자원은 농촌주민과 도시민이 지닌 가치에 기초하여 생활자원적 가치와 관광가치적 가치를 동시에 혹은 차등적으로 지닐 수 있다. 이러한 관점은 농촌자원에 대한 중요도 평균에 대한 차이검증(t-test)을 수행한 결과 전체 자원의 56.8%에 해당하는 21개가 유의미한 차이를 보인 결과에 의해 지지를 받는다. 셋째, 농촌자원에 대한 순위적 상관관계분석에서도 전문가와 전체집단에서 생활자원과 관광자원에 대한 순위상관관계가 의미가 없는 것으로 나타나 위의 두번째 결과를 지지하고 있다. 이러한 결과는 농촌자원의 개발 방향과 가치부여가 자원의 속성에 따라 차등적으로 진행되어져야 함을 보여준다. 다섯째, 농촌자원의 유형을 생활자원화와 관광자원화에 대한 중요도의 표준화 점수에 기초하여 4개 유형(유형 I~IV)으로 구분하였다. 이러한 유형별 자원중요도를 고려하여 농촌마을의 개발목적에 비추어 생활자원형이나 관광자원형과의 연계를 통해 마을의 정체성과 특성화에 기여할 수 있도록 해야 할 것이다.(요약 및 결론에서 발췌)를 고지도와 지리지.읍지를 통하여 살펴봄으로써 변한 것과 변하지 않는 것을 분석하여 시대상의 복원과 지역사회의 정체성 확립에 일조하고자 한다.곡물의 여러 줄기가 합수하고 물이 역류하지 않으며 잘 감아도는 곳으로 표현할 수 있다 이러한 명당의 기본적인 원리는 장풍(藏風)과 득수득파(得水得破)이다. 장풍과 득수란 '국'(局), 즉 산줄기와 수계로 이루어진 일정한 범위 속에 만물이 생태계 속에서 살아가는 모습인 '체형(體形)'의 의미가 나타나야 한다는 것이다. 그러나 이러한 의미는 시대에 따라 달라질 수 있는 것이다.면적의 52%를 점유하여 감자 재배지의 핵심지를 이룬다. 4. 한국 감자 재배지역 중심지의 지리적 특징은, 높은 산지지역의 산록완사면에 밭작물로 재배된다는 점과 교통이 불편한 지역으로서 도시화와 산업화 지역의 그늘 지역이 대부분이다. 강원도의 감자 재배지는 감자재배에 적합한 자연환경과 화전농업의 전통, 감자 재배기술의 전파, 중앙정부와 지방정부가 지원하는 각종 연구소 분포와 영농지도, 씨감자 생산과 협동조합의 판로 개척, 도로 개설과 포장 등의 인문지리적 요인이 영농조건을 개선하고 감자 판매를 위한 시장접근을 용이하게 하여, 남한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달

• The Korean Journal of Archival Studies
• /
• no.38
• /
• pp.225-264
• /
• 2013

The Purpose of this study is to analyze an active discussion in North America about the issue of community archives governance which mainly focused on 'participatory archives' model and from it, draws implications for the present stage of domestic community archives development. Traditionally in the United States and Canada, local community archives have been built mostly by mainstream cultural institutions such as public archives, public libraries, museums, and historical societies as a part of comprehensive documentation of the society at large. At the same time, they have been processed and managed in accordance with the institution's collection development policy. As a result, most community archives in North America are characterized as top-down community archives model (in contrast with down-up model of 'independent' community archives as a part of grass roots movement in the UK). Recently, the community archives in North America with these characteristics try to overcome their limitations, which result in 'the others' of community archives, through governance, that is, community-institution partnership. Participatory archives model which assumes active community participation in all archives processes is being suggested by archival communities as the effective alternative of governance model of top-down community archives. This discussion of community archives governance suggests progressive direction for the present stage of domestic community archives, which has been built mostly by various mainstream cultural institutions and still has been stayed in 'about the community' stage. Particularly, community outreach strategies that participatory archives model concretely suggests are useful as a conceptual framework in building community archives based on community-institution partnership in reality.