• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.690-696
• /
• 2005

It is very important to reduce the PAPR(Peak to Average Power Ratio) in the OFDM(Orthogonal Frequency Division Multiplexing) communication system. The proposed method in this paper is an effective PAPR reduction method using the Golay complementary codes without my side information. There are some PAPR reduction methods with the complementary code pairs or sequences. They are usually a type of the forward ewer correction codes so that they produce more redundancies and lower down the code rate. Because of this, the information rate may be cut down or more bandwidth must be required. In this paper, we propose a PAPR reduction method that uses the multi-phase complementary code f3r converting the 4-QAM into 16-QAM constellation. It does not change the code rate and does not require the side information.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.217-223
• /
• 2015

This paper describes the design and implementation of a network system for UAV for multiple clients that enables long-range operation based on a commercial mobile network. A prototype data modem is developed with a commercial embedded M2M module in order to provide an access to the mobile network. A central server with a database is constructed to record all of real-time flight and video data and communicate with a ground control system. A GCS is developed for the central control, the single UAV and the smart phone version to be used for different purposes. Performance tests were progressed for data delay, video frame rate and state of clients. Flight tests were also performed to verify the reliability of the modem with respect to altitude.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.758-766
• /
• 1992

In this paper, the traffic control scheme used by M-cancel-Get services In CMIS /CMIP, OSI network management protocol, is presented and the performance is analyzed. M -Get service which allows a multiple response functional unit is a service that searches an attribute of the managed sys-tem and the service requires a large quantity of response as its typical characteristics. At the time, management response is transmitted Irrelevant to the network condition In the managed as well as In the management system. The management system requests M Canrel-Get service which informs the canrelation of M -Get service (or Information retrieval. In case of using M-Cancel-Get service for traffic control, the point of time for traffic control is propose by the result of simulation on management response time as the number of multiple response packets is Increased. The result is analyzed by processing ratio of the network workload and the average delay time of packets. As a result, the traffic control parameters proposed in the study show superiority in its processing ratio and the average packet delay time. Especially, its performance improves as the size of background traffic density Increase.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.542-547
• /
• 2012

Until recently, most of GCS(Ground Control Software) has been required to visualize attitude, position, status of vehicle and to transmit control and mission commands for a single UAV(Unmanned Aerial Vehicle). However, the GCS needs to expand its functions to handle more complex situations. Simultaneous operation of multiple UAVs is emerging as a new practice. Hence, we set up requirements for operation of multiple UAVs and suggest the architecture of GCS that satisfy the requirements. In this study, we analyze the upper requirements and define the total structure of GCS at first. Then we design the inner structure for requirements in detail. Finally, we verify the functions of GCS on PILS(Processor In the Loop Simulation) System.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.20-25
• /
• 2011

The authors have proposed novel TDD-CDMA systems with Pre-Rake transmit diversity schemes (system 1 and system 2) using multiple transmit antennas in [2] and have also evaluated the system performance through the theoretical analysis and computer simulation. However, the performance of system 2 which transmit a signal using all antennas has not been evaluated for multi-user environment. Therefore in this paper, we analyze the performance of system 2 for multi-user environment and compare the performance with that of the already proposed system 1 which chooses only one antenna. From the numerical results, it is found that system 2 outperforms system 1 as the number of users increases while system 1 outperforms system 2 at a small number of users. Therefore in order to achieve the best system performance, the Pre-Rake transmit diversity type should be selected at the base station according to the number of users.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.1-8
• /
• 2019

Generally, printers are common for users to use for public use over a wired or wireless local area network. The number of printers in the same network is increasing, and management of multiple printers is needed. To do this, a program that drives two or more printers and a computer connected by a wired or wireless network. When a computer's control department receives a print command for a designated file, it executes the steps of receiving status information from the printer, selecting the printer, and sending the print command execution. As a method of research, we presented a method for selecting differentiation from this study through prior art research and literature research. Therefore, the purpose of the study is to distribute smart print commands according to real-time status information of many printers to increase the efficiency of the printer's management, and to distribute print commands according to the cumulative and usable workload of many printers so that parts replacement of many printers can be instantaneously performed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.489-496
• /
• 2021

The X-band frequencies for transmitting the data from earth observation satellites are limited, so a number of satellites share the frequency bands. In order for multiple satellites to utilize same or adjacent frequency bands, International Telecommunication Union - Radiocommunication (ITU-R) limits power flux density (PFD), which overcomes the interferences among multiple satellites. However, even under the regulation, the interference effect needs to be analyzed when multiple satellites are connected to communicate with multiple ground stations (GSs) located close to each other. In this paper, the interference effect is analyzed based on signal to interference plus noise ratio (SINR) when two low earth orbit (LEO) satellites operating in different orbits are connected to communicate with randomly located two GSs in Korean peninsula. From the analysis results, it is confirmed that there can be interferences during 365 days operation even if the satellites meet PFD requirement, but the periods under interference effects are short and the interference can be foreseen.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.12-20
• /
• 2013

Even though extensive research results have been applied to wireless cellular systems to improve their capacity and coverage, severe performance degradation experienced in cell boundary areas still remains as a major limiting factor to prohibit further improvement of user equipment (UE) throughput. In the Long Term Evolution-Advanced (LTE-A) standard of the Third Generation Partnership Project (3GPP), Some advanced techniques have been introduced to overcome this "cell-edge problem", including coordinated multipoint transmission and reception (CoMP) and inter-cell interference coordination (ICIC). In this paper, we propose yet another strategy to improve the performance of low-tier UEs by using the concept of multiple beam direction patterns (BDPs). Such multiple BDPs can be implemented using multi-layer antenna arrays stacked vertically at base station (BS) sites to transmit signals in different main beam directions. In comparison to conventional three-sector antennas with a fixed beam pattern, the proposed methods makes signal transmission in a rotational fashion to significantly enhance the reception quality of UEs located near sector (or cell) edge areas, preventing the situation where certain UEs are marginally covered by the BS for the whole transmission time. Performance evaluation results show that the proposed scheme outperforms the conventional three-sector transmission by 171% in low 5% UEs in terms of the UE throughput.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.754-762
• /
• 2021

Seamless wireless communication network access technology enables users to guarantee service continuity. Hence, it is necessary for disaster situations in which network service may be interrupted. The Multi-path router is a technology to improve network stability and strengthen field operability, particularly in a disaster environment where network failure can occur by providing high-performance data transmission using multi-communication networks and network security by VPN-based wireless IP. In this paper, a prototype system for an MPR-based wireless communication network was proposed to improve the operation performance for disaster field investigation applications. A comparative experiment was performed on various data transmission performances with the existing single wireless communication network. In addition, another experiment was conducted by measuring the data packet transmission and receiving performance in the existing/new wireless communication system first and then assessing the UDP transmission performance in a single router environment to understand the transmission capability of the new MPR. The experimental results showed that the sending and receiving performance was improved by approximately double that of the existing single wireless communication system. The proposed prototype system is expected to allow users to share and disseminate collected on-site data more quickly and efficiently during a disaster site investigation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.66-71
• /
• 2012

The capacity criteria have been proposed in order to select a cooperative relay node in WSNs, under the environment where direct path has a poor link gain. This process may ensure the efficiency improvement of signal transfer between source and destination and reduction of energy consumption as well. Two criteria are incorporated to select a cooperative relay node. Firstly, calculate the energy gain ratio between the relay path and the direct path. These are defined as the ratio between the energy factors of 1/g and 1/B. Each stands for an inverse of direct path gain and relay path gain. Secondly, investigate the effects of relay node's usage in WSNs through the simulation in terms of energy consumption. In conclusion, using a selected cooperative relay node based on the selected criteria is effective in terms of both energy efficiency and capacity of WSNs especially when direct path gain is relatively low.